Sony KL-40WA1K Bedienungsanleitung

LCDProjectionTV RF

èoÀÖoÚoÇÍa Í

íÍcÔÎyaÚaáËË

3-861-211-41 (1)

KL-40WA1K

Operating Instructions

Getting Started

Hasn·lati ⁄tmutatÛ

A kÈsz¸lÈk

¸zembehelyezÈse H

àÌÒÚ ÛÍˆËË Á‡

ÂÍÒÔÎÓ‡Ú‡ˆËﬂ

àÌÒÚ ÛÍˆËﬂ ÔÓ

˝ÍÒÔÎÛ‡Ú‡ˆËË

UvedenÌ do provozu

Funkce

Przed rozpoczÍciem

Instrukcja obs≥ugi

èÓ‰„ÓÚÓ‚Í‡ Í

˝ÍÒÔÎÛ‡Ú‡ˆËË

àÌcÚpyÍáËÓ Ôo

íÍcÔÎyaÚaáËË

ç‡˜‡ÎÓ

KL-40WA1K

WARNING

To prevent fire or shock hazard, do not expose the unit to

rain or moisture.

Dangerously high voltages are present inside the set. Do

not open the cabinet. Refer servicing to qualified

personnel only.

Safety Information

All TVs operate on extremely high voltages. To prevent

fire or electric shock, please follow the safety procedures

below. For your protection, refer all servicing to qualified

personnel only.

For general safety:

• Do not expose the TV to rain or moisture.

• Do not open the rear cover.

For safe operations:

• Do not operate the TV on any other voltages, but 220–

240 V AC.

• Do not operate the TV if any liquid or solid object falls in it

- have it checked immediately.

• Do not keep the set plugged in if you are not going to use

it for several days.

• Do not pull on the power cord to disconnect the TV. Pull it

out by the plug.

• Do not place anything on the surface of the front panel

cover when you open it.

Important Information

Please read the following information on using and

maintaining the TV, for optimum viewing quality.

Picture Quality

• Avoid touching the screen, and take care not to scratch

the surface with hard objects.

Illumination

To obtain a clear picture, do not expose the screen to

direct illumination or direct sunlight. If possible, use spot

lighting directed down from the ceiling.

Installation

• To prevent over heating of the set, do not block the

ventilation openings.

• Do not install the TV in a hot or humid place, or in a place

subject to direct sunlight, excessive dust or mechanical

vibration.

• After transporting the TV directly from a cold to a warm

location, or if the room temperature has changed

suddenly, pictures may be blurred or show poor colour

over portions of the picture. This is because moisture has

condensed on the mirrors or lenses inside the TV. Let the

moisture evaporate before using the TV.

Maintenance

• Save the original shipping carton and packing material to

use if you ever have to ship your TV. For maximum

protection, repack your TV as it was originally packed at

the factory.

• To keep the cabinet looking brand-new, periodically clean

it with a soft cloth. Stubborn stains may be removed with a

cloth slightly dampened with a mild detergent solution.

Never use strong solvents such as thinner or benzene, or

abrasive cleaners since these will damage the cabinet. As

a safety precaution, unplug the TV before cleaning it.

• To remove dust from the front of the screen, unplug the

TV and wipe gently with a soft cloth lightly dampened with

water or a mild detergent solution, using vertical strokes

only. Then wipe it with a dry, soft cloth. Never use

solvents or thinners for cleaning purposes.

• If the picture turns dark after the TV has been in use for a

long period of time, it may be necessary to clean the

inside of the TV. Consult qualified service personnel for

this.

Contents

Overview ................................................................................... 4

Getting Started ...............................................................

Step 1 Preparation..................................................................... 6

Check the supplied accessories ...................................... 6

Insert the batteries into the Remote Commander ............. 6

Connect the aerial........................................................... 6

Step 2 Tuning in to TV Stations .................................................. 7

Choosing the Menu Language and the Country ............... 7

Presetting Channels Automatically .................................. 8

Additional Presetting Functions .................................................. 9

Presetting Channels Manually......................................... 9

Sorting Programme Positions........................................ 10

Using “Further Programme Preset” ............................... 11

Skipping Programme Positions ..................................... 12

Captioning a Station Name ........................................... 12

Using Parental Lock ...................................................... 13

Tuning in a Channel Temporarily................................... 13

Operating Instructions.................................................

Watching the TV....................................................................... 14

Switching the TV on and off ........................................... 14

Selecting TV Programmes ............................................ 14

Adjusting the Volume .................................................... 14

Operating the TV Using the Buttons on the TV............... 14

Watching Teletext or Video Input................................... 15

More Convenient Functions .......................................... 15

Adjusting and Setting the TV Using the Menu ........................... 16

Adjusting the Picture and Sound ................................... 16

Using the Sleep Timer................................................... 17

Operating Screen Mode ................................................ 18

Auto 16:9 ...................................................................... 18

Teletext.................................................................................... 19

Direct Access Functions................................................ 19

Using the Teletext Menu ............................................... 21

User Page Bank System ............................................... 22

Connecting and Operating Optional Equipment ........................ 23

Connecting Optional Equipment.................................... 23

Selecting lnput and Output ............................................ 24

Using AV Preset ........................................................... 25

Remote Control of Other Sony Equipment ..................... 26

For Your Information ................................................................ 27

Optimum Viewing Area ................................................. 27

Cleaning the Air Filter.................................................... 28

Replacing the Lamp ...................................................... 29

Troubleshooting............................................................ 30

Specifications ............................................................... 30

Warning Indicators ........................................................ 31

Stabilizing the Projection TV.......................................... 31

Getting Started

Operating Instructions

Name

Main power switch

Standby indicator

Stereo A/B indicators

Lamp indicator

Programme

Volume buttons

Input select buttons

Headphones jack

Input jacks (S video/video/audio)

Symbol

A-m-B

PROGR+/–

.+/–

3, 3, 3

Overview

This section briefly describes the buttons and controls on the TV

set and on the Remote Commander. For more information, refer to

the pages given next to each description.

TV set-front

Refer to page

14, 31

29, 31



For the Menu System

Use the MENU button and the joystick as follows.

1Press MENU button to switch menu on or off.

2Use the joystick as follows:

The operable functions of the joystick are displayed on the

screen.

Name

Menu on/off button

Joystick for Menu selection

Press to confirm selection

(OK function)

Name

Mute on/off button

TV Standby button

TV power on/TV mode selector

button

Teletext button

Input mode selector/

Teletext: Freezing the subpage

Output mode selector/

Teletext: Reveal button

Number buttons

Double-digit entering button

Direct channel entering button

Volume control button

Programme selectors

Teletext: Page up/page down buttons

Picture adjustment button

Sound adjustment button

On-screen display button

Time display button

“Freeze” button

Button to change Screen Format

Teletext: Favourite pages button

Name

Video equipment selector

Video equipment operation

buttons

Symbol

Remote commander

No function on this set

Symbol : , , , ,

Menu operation

Symbol

VTR1/2/3,

MDP

;; -:: L

JaVIDEO f

CH +/–

Refer to page

Video operation

Menu operation

Symbol

TV u

;

…/

Ú/

1,2,3,4,5,6,

7,8,9 and 0

Á+/–

PROGR +/–

≥

TV/Teletext operation

Refer to page

See below.

GREEN: scroll up

RED:

decrease/back to last item

or to last menu

When menu is not

displayed:

Push to red to display the

last menu screen

YELLOW:

increase/forward

to next item

Joystick: Press at

its neutral position

to confirm selection

or store

BLUE: scroll down

RM-862

a/Å

´/´

;



MDP2 TV

VIDEO

3VTR 1

( u)

pPr

PROGR

≥

;

REC

…/ Ú/;

TV/Teletext operation

1Check the supplied accessories

When you’ve taken everything

out of the carton, check that you

have these items:

• RM-862 Remote Commander

• Two IEC designation R6 batteries

• Wrench (1)

• Bracket (2)

2Insert the batteries into the Remote Commander

Step 1 Preparation

Getting Started

Fit an IEC aerial connector attached to 75-ohm coaxial cable (not

supplied)tothe)socketattherearoftheTV.

Remove the cover. Check the correct

polarities.

Note: Always remember

to dispose of used

batteries in an

environmentally friendly

way.

3Connect the aerial

Step 2 Tuning in toTV Stations

1Choosing the Menu Language

and the Country

Using this function, you can select the language of the menu

screens. Also, you can select the country in which you will use the

TV. In this way, the channels of the selected country will

automatically get the top positions during automatic presetting.

1Press the power switch uon the TV.

If the standby indicator uon the TV is lit, press ;or a number

button on the Remote Commander.

2Press MENU on the Remote Commander.

The LANGUAGE menu appears.

3Push the joystick to blue or green to select the language. Press

the joystick to confirm your selection.

The COUNTRY menu appears.

4Push the joystick to blue or green to select the country in which you

wish to operate the TV. Press the joystick to confirm the selection.

5Press MENU to restore the normal TV picture.

To go back to the

normal TV picture

Press MENU. Normal

TV picture will be

restored after one

minute if menu functions

are not selected.

Note on the Demo

function

If you choose Demo in

the INSTALLATION

menu, you can see a

sequential

demonstration of the

menu functions.

Press MENU to stop the

function.

RM-862

a/Å

´/´

;



MDP2 TV

VIDEO

3VTR 1

( u)

pPr

PROGR

≥

;REC

…/ Ú/;

COUNTRY

LANGUAGE

Select

2Presetting Channels

Automatically

With this function, the TV automatically searches and stores up to

100 channels onto programme positions. If you prefer “Presetting

Channels Manually”, please refer to page 9 in Additional Presetting

Functions.

1Press MENU.

2Push the joystick to blue or green to select the symbol on the

menu screen, then push to yellow.

3Push the joystick to blue or green to select “Auto Programme”,

then push to yellow.

The AUTO PROGRAMME menu appears.

4a) Allitemsshownonthemenuscreenareaswanted: Pressthe

joystick to select START.

Now the automatic channel presetting starts from programme

position 1.

4b) Youwishtochangeitems asshownonthemenuscreen: Push

the joystick to blue or green. Push to yellow repeatedly until the

desired item is highlighted.

Push the joystick to blue or green to select the following options:

ACI(AutomaticChannelInstallation,dependingon

availabilityofserviceinyourcountry)

on: fast channel presetting by special networks using the channel

frequency (e.g. F055)

TV-system and station label

off: ACI is not active, only ITP (Intelligent Tuner Preset)

SYS(TVBroadcastSystem)

I for U.K.

B/G for Western European Countries

D/K for Eastern European Countries

L for France

PROG(ProgrammePosition)

Presetting automatically starts from position 1.

CH(channel)

C to start presetting with terrestrial channels

S to start presetting with cable channels

Press the joystick as soon as the automatic presetting starts.

Notes

• After presetting the

channels automatically,

you can check which

channels are stored on

which programme

positions.

For details, see

“Displaying the

Programme Table” on

page 15.

• You can sort the

programme positions to

have them appear on

screen in the order you

like. For details, see

“Sorting Programme

Positions” on page 10.

Installation

Programme Sorting

Manual Programme Preset

Auto Programme

PRESET

Parental Lock

AUTO PROGRAMME

SYS PROG CH LABEL

START

ACI B/G 01 C07 SW3on

MANUAL

PROGRAMME

PRESET

Additional Presetting Functions

Presetting Channels Manually

Using this function, you can preset channels one by one to

different programme positions. This is also convenient to allocate

programme numbers to video input sources.

1Press MENU.

2Push the joystick to blue or green to select the symbol on the

menu screen. Push to yellow to confirm the selection.

3Push to blue or green to select “Manual Programme Preset”. Push

to yellow to confirm the selection.

4Push to blue or green to select the programme position (PROG) to

which you want to preset a channel. Push to yellow to confirm.

5Push to blue or green to select the TV broadcast system (SYS)

(I for U.K., B/G for western European countries, D/K for eastern

European countries, L for France) or a video input source (EXT).

Push to yellow to confirm.

6Push to blue or green to select “C” (for terrestrial channels), “S” (for

cable channels) or “F” ( for channel frequency). Push to yellow to

confirm.

Therearetwooptionstopresetchannelsmanually:

a) You know the channel number or channel frequency.

Please use method “Direct Input”.

b) You don’t know the channel number or frequency.

Please use method “Search”.

7a) DirectInput

For channel numbers, you need to input a two digit number, for the

frequency, a three digit number.

• Push to blue or green to select the first digit of the channel number

or frequency. Push to yellow to confirm.

• Push to blue or green to select the second digit of the number or

frequency. Push to yellow to confirm. In case of the channel

number, the search starts.

• Push to blue or green to select the third digit of the frequency

number. Push to yellow to start the search of the frequency.

• To continue search for another channel: Push to blue or green.

• To store the selected channel: Press the joystick.

• Repeat steps 4 to 7 a) to preset other channels.

7b) Search

• Push repeatedly to yellow until a blue and a green arrow appear in

the section SEARCH.

• Push to blue or green to search for the next available channel.

• To continue search for another channel: Push to blue or green.

• To store the selected channel: Press the joystick.

• Repeat steps 4 to 7 b) to preset other channels.

Installation

Programme Sorting

Manual Programme Preset

Auto Programme

PRESET

Parental Lock

MANUAL PROGRAMME PRESET

PROG

B/G

SYS

C21

C34

C33

C45

C02

C08

C10

C12

off

SEARCH LABEL

-----

RM-862

a/Å

´/´

;



MDP2 TV

VIDEO

3VTR 1

( u)

pPr

PROGR

≥

;

REC

…/ Ú/;

Sorting Programme Positions

This function enables you to sort the programme positions to a

preferable order.

1Press MENU.

2Push the joystick to blue or green to select the symbol on the

menu screen. Push to yellow to confirm.

3Push to blue or green to select “Programme Sorting”. Push to

yellow to confirm.

4Push to blue or green to select the programme position of the

channel you want to change. Press joystick to confirm.

5Push to blue or green to select the new programme position.

Press joystick to confirm.

Now the selected channel is changed to the new programme

position.

6Repeat steps 4 and 5 to sort other programme positions.

To go back to the

normal TV picture

Press MENU.

PROGRAMME

SORTING

PROGRAMME SORTING

PROG

C03

C04

C07

C09

C12

C13

C14

C15

CH LABEL

BBC 2

ITV

MBC

-----

BBC 1

Move PR 8 to PR - -

8 BBC1C15

Inhaltsverzeichnis

Andere Sony Projektionsfernsehen Handbücher

Sony

Sony KDS-R60XBR2 - 60" Class Sxrd™ Xbr Rear Projection... Benutzerhandbuch

Sony

Sony KP-61XBR300 - 61" Color Rear Video Projector Bedienungsanleitung

Sony

Sony KP-57WS520 - 57" Hi-scan Projection... Gebrauchsanweisung

Sony

Sony Bravia KDF-E42A12U Bedienungsanleitung

Sony

Sony KDS-Z60XBR5 Bedienungsanleitung

Sony

Sony KP-57WV600 - 57"hi-scan 1080i 16:9 Projection... Bedienungsanleitung

Sony

Sony KP-41S5 Bedienungsanleitung

Sony

Sony KP-46WT520 - Wide Screen Projection Tv Bedienungsanleitung

Sony

Sony KDF-E50A10 Bedienungsanleitung

Sony

Sony KP-43T70 - 43" Color Rear Video Projector Bedienungsanleitung

Sony

Sony KP-41T65C Bedienungsanleitung

Sony

Sony KL-X9200M Bedienungsanleitung

Sony

Sony KP-41PX1 Bedienungsanleitung

Sony

Sony KP-53VGB Bedienungsanleitung

Sony

Sony Grand Wega KF-50SX100 Bedienungsanleitung

Sony

Sony KP-48V90 - 48" Projection Tv Gebrauchsanweisung

Sony

Sony Bravia KDF-E42A12U Bedienungsanleitung

Sony

Sony KP-48V80 - 48" Color Rear Video Projector Bedienungsanleitung

Sony

Sony GRAND WEGA KDS-R60XBR2 Bedienungsanleitung

Sony

Sony KP 43T90 Benutzerhandbuch

Sony

Sony KP-EF61 Bedienungsanleitung

Sony

Sony QUALIA KDS-R50XBR1 Bedienungsanleitung

Sony

Sony KP 61V75 Bedienungsanleitung

Sony

Sony KDF50E2000 - 50" Rear Projection TV Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-65734 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Philips

Philips 43PP8421 Bedienungsanleitung

Hitachi

Hitachi 51F510 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Hitachi

Hitachi 46F510 Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Toshiba

Toshiba 42HM66 - 42" Rear Projection TV Bedienungsanleitung

Philips

Philips 50PL9200D Bedienungsanleitung

Hitachi

Hitachi 51S715 Bedienungsanleitung

Samsung

Samsung HC-P5256W Bedienungsanleitung