Sony Bravia Theatre Sync RHT-G800 Gebrauchs- und Wartungshandbuch

3-093-228-21(2)

Theatre Stand

System

HDMI CONTROL Guide

RHT-G800

2GB

To use ‘BRAVIA’ Theatre Sync, set the HDMI

CONTROL function as explained below.

By connecting Sony components that are

compatible with the HDMI CONTROL function

with an HDMI cable (not supplied), operation is

simplified as below:

• One-Touch Play: When you play back a

component such as a DVD/Blu-ray Disc

player, the stand and the TV are turned on

automatically and switch to the appropriate

HDMI input.

• System Audio Control: While watching TV,

you can select to output the sound from the TV

speaker or the speakers of the stand.

HDMI CONTROL is a mutual control function

standard used by HDMI CEC (Consumer

Electronics Control) for HDMI (High-Definition

Multimedia Interface).

The HDMI CONTROL function will

not operate in the following

cases:

• When you connect this stand to a component

which is not correspond with Sony’s HDMI

CONTROL function.

• When you connect the stand and components

using other than HDMI connection.

We recommend that you connect this stand to

products featuring ‘BRAVIA’ Theatre Sync.

• Do not use the Input SYNC function while the

HDMI CONTROL function is active. For details,

see the operating instructions of the stand.

• Depending on the connected component, the HDMI

CONTROL function may not work. See the operating

instructions of the component.

Using the HDMI CONTROL

function for ‘BRAVIA’

Theatre Sync

Notes

3GB

• We recommend that you do not use components

which have an HDMI output jack and components

which do not have an HDMI output jack at the same

time. If you do so, the HDMI CONTROL function

may not work.

We recommend you use the Input SYNC function

(Programming the remote for TV operation) if you

use components which have an HDMI output jack,

and components which do not have the HDMI output

jack at the same time.

Connecting the TV and the other component

TV monitor, projector, etc.

Audio signal

AOptical cable (supplied)

Make this connection to listen to the high quality sound of the TV.

BHDMI cable (not supplied)

We recommend that you use a Sony HDMI cable.

Video signal

DVD/Blu-ray Disc player (recorder)

Audio/video

signal

Satellite tuner

Audio/video

signal

Note

4GB

Before you use the HDMI CONTROL function,

be sure you have performed the following

procedures.

For details on setting the TV and connected

component, see the operating instructions of

them.

1Make sure that the stand is connected

to the TV and connected component

(which should be compatible with the

HDMI CONTROL functions) using a

HDMI cable (not supplied).

2Turn on the TV, and set the HDMI

CONTROL to “ON,” then switch to the

HDMI input connected to the stand.

3Press ?/1 to turn on the stand, and

then set HDMI CONTROL to “ON” as

follows.

1Press AMP MENU.

“LEVEL” appears on the display.

2Press xto select “CUSTOMIZE,”

then press or c.

“HDMI CTRL” appears on the display.

3Press or c, and then press X.

“CTRL ON” flashes on the display.

4Press .

“CTRL ON” appears on the display for

a few seconds, and then the menu return

to the normal display. HDMI

CONTROL function is set to ON.

4Turn on the connected component.

5Select the input connected to the

component you want to watch (DVD/

BD, SAT, etc,.) of the stand and TV, so

that an image from the connected

component is displayed.

Set the HDMI CONTROL of the

connected component to “ON.”

6Repeat steps 4 and 5 for each

connected component you want to use

the HDMI CONTROL function.

Reconnecting components

Perform step 5 on this page, then output

video signals to the TV.

Preparing for the HDMI

CONTROL functions

?/1

C, X, x, c,

AMP

Input

buttons

(DVD/BD,

SAT)

5GB

Play back a connected component.

The stand and the TV are turned on

automatically and switch to the appropriate

HDMI input.

• Depending on the TV, the start of the content may not

be output.

• You can enjoy the DVD player (recorder) connected

to the stand, even if you turn the stand off. The power

indicator lights up in orange at this time.

You can enjoy the TV sound from the speakers

of the stand by means of a simple operation. For

details, see the operating instructions of the TV.

Press ?/1 to turn on the stand.

The sound is output from the speaker of the

stand. The sound is output from the TV’s speaker

when you turn the stand off.

• You can adjust the volume and mute the sound of the

stand using the TV remote.

• When the TV is turned on before this stand is turned

on, the TV sound will not be output for a moment.

• When you connect a TV that does not have System

Audio Control function, the System Audio Control

function does not work.

Watching a DVD

(One-Touch Play)

Note

Tip

Enjoying the TV sound

from the speakers in this

stand

(System Audio Control)

Tip

Notes

?/1

continued

6GB

Using the input buttons of the

remote of the stand

The input buttons (TV (white), DVD/BD, SAT,

AUDIO) work as follows when the HDMI

CONTROL is set to “ON.”

• DVD/BD, SAT: Since the input of the TV is

also switched automatically, you can watch the

image of the selected component on the TV

simply by pressing the buttons.

• TV, AUDIO: The input of the TV does not

switch automatically.

Watching a TV program

Press TV (white) or TV (orange), then select the

program you want to watch using the number

buttons or PROG+/–.

When you turn the TV off by using the POWER

button on the TV’s remote, the stand and the

connected components turns off automatically.

1Press TV (orange) on the remote.

2Press AV ?/1.

The TV, the stand and the connected

component are turned off.

• Depending on the status, the connected components

may not be turned off. For details, see operating

instructions supplied with the connected components.

Turning off the stand with

the TV

(System Power Off)

Note

AV ?/1

(orange)

7GB

If you experience any of the following

difficulties while using the HDMI CONTROL

function, use this troubleshooting guide to help

you remedy the problem.

The HDMI CONTROL function does not work.

• Check the HDMI connection (page 3).

• Make sure “HDMI CTRL” is set to “CTRL

ON” in AMP menu.

• Make sure the connected component is

compatible with the HDMI CONTROL

function.

• Check the HDMI CONTROL settings on the

connected component. See the operating

instructions supplied of the connected

component.

• If you change the HDMI connection,

connect/disconnect the AC power cord, or

there is a power failure, repeat the

procedures of “Preparing for the HDMI

CONTROL functions” (page 4).

• The stand may not work correctly if you

select a component that is not compatible

with the HDMI CONTROL function on the

TV side.

No sound is output from the stand and TV

speaker.

• Check the volume of the stand and the TV.

• Select the input of the stand correctly.

The sound is output from both the stand and

the TV.

• Mute the sound of the stand or the TV.

The System Power Off function does not work.

• Change the setting of the TV to turn

connected components off automatically

when you turn off the TV. For details, refer

to the operating instructions of the TV.

An image does not appear on the TV.

• Check whether HDMI IN and HDMI OUT

are connected in reverse.

The TV program does not appear on the TV.

• Press TV (white) or TV (orange), then select

the program you want to watch using the

number buttons or PROG+/–.

Troubleshooting

Sony Corporation Printed in Malaysia

Andere Handbücher für Bravia Theatre Sync RHT-G800

Inhaltsverzeichnis

Andere Sony Rack & Stand Handbücher

Sony

Sony SU-WL855 Service-Handbuch

Sony

Sony SU-32F2 Bedienungsanleitung

Sony

Sony SU-46HX1 Bedienungsanleitung

Sony

Sony SU-WL450 Service-Handbuch

Sony

Sony SU-40NX1 Bedienungsanleitung

Sony

Sony CH-SMAC400 Bedienungsanleitung

Sony

Sony SU-SX10 Bedienungsanleitung

Sony

Sony SU-34XBR3 Bedienungsanleitung

Sony

Sony SUFL71M - SU - Stand Bedienungsanleitung

Sony

Sony SU-WL450 Service-Handbuch

Sony

Sony SU-46NX1 Bedienungsanleitung

Sony

Sony LSPX-PS1 Bedienungsanleitung

Sony

Sony BKM-38H Bedienungsanleitung

Sony

Sony SU-30HX1 Bedienungsanleitung

Sony

Sony PROFORMA460AB Bedienungsanleitung

Sony

Sony PDBK-A640 Bedienungsanleitung

Sony

Sony SU-600MD Bedienungsanleitung

Sony

Sony PEG-NX80V - Clie Handheld Bedienungsanleitung

Sony

Sony Bravia XBR-84X900 Leitfaden

Sony

Sony SU-RG11MA Bedienungsanleitung

Sony

Sony SU-WH500 Bedienungsanleitung

Sony

Sony SU-MD1 Bedienungs- und Wartungsanleitung

Sony

Sony BKM-37H Bedienungsanleitung

Sony

Sony MB-806A Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung