Sony SFM1 Bedienungsanleitung

INSTALLATION MANUAL

SFM1

Sony Electronics, Inc.

16540 West Bernardo Drive

San Diego, CA 92127

www.sony.com

PBL-110 Projector Mount

Page 2 Installation Manual

SFM1

Installation Manual Page 3

Table Of Contents

Warning Statements .................................................................................................................................................... 4

Parts List ....................................................................................................................................................................... 5

Flat Panel List ............................................................................................................................................................... 5

Installation Tools ......................................................................................................................................................... 5

Flat Panel Mount Location ......................................................................................................................................... 6

Mounting Bracket Positioning .................................................................................................................................... 6

Griplates™ ..................................................................................................................................................................... 9

Wood Stud Location .................................................................................................................................................. 10

Marking The Mounting Points ................................................................................................................................. 11

Securing The Wall Plate To The Wooden Studs ..................................................................................................... 12

Securing The Wall Plate To A Concrete Wall .......................................................................................................... 13

Securing The Flat Panel To The Wall Mount .......................................................................................................... 14

Lateral Shift Adjustment ........................................................................................................................................... 14

Security Cable ............................................................................................................................................................. 15

Technical Specifications ............................................................................................................................................ 16

Warranty ..................................................................................................................................................................... 17

Customer Support ...................................................................................................................................................... 17

Notes ........................................................................................................................................................................... 18

SFM1

Page 4 Installation Manual

Warning Statements

WARNING: THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE (5) TIMES THE

WEIGHT OF THE DISPLAY. IF NOT, THE WALL STRUCTURE MUST BE REINFORCED. PROPER

INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE

INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT

IN SERIOUS PERSONAL INJURY, OR EVEN DEATH.

WARNING: SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF

THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION

PROCEDURE TO PREVENT PERSONAL INJURY.

WARNING: PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS

SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS

MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE

INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE

REFERENCE.

Indicates that the power plug is to be

disconnected from the power outlet.

Contact Sony Electronics with any

questions.

Safety precautions must be taken at all

times.

Warning and Caution statements.

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to

do so could result in damage to the display and/or damage to the mounting surface.

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct

heat energy. Failure to do so may result in damage to the display and could increase the risk of

fire.

At least two qualified people should perform the installation procedure. Injury and/or damage can

result from dropping or mishandling the plasma display.

Recommended mounting surfaces: wooden studs and solid-flat concrete. If the mount is to be

installed on any surface other than wooden studs, use suitable hardware (which is commercially

available).

SFM1

Installation Manual Page 5

Parts List

NOTE: This wall mount is shipped with all proper installation hardware and components. Make sure that

none of these parts are missing and/or damaged before beginning installation. If there are parts

missing and/or damaged, please stop the installation and contact Sony Electronics (800)222-7669.

Wall Plate (1ea)

Mounting

Brackets (Left and

Right)

Griplates™

(4ea)

5/16” x 3” Lag

Bolts (4ea)

(Wooden studs

only)

M6 x 12mm

(4ea)

5/16” Flat

Washers-Metal

(8ea)

Flat Panel List

SONY

Fits All Sony Professional plasma and Large LCD Panels.

Installation Tools

Phillips Head Screw Driver Portable Drill ¼” Drill Bit Level

Soft Material/ Blanket Pencil Tape Measure Wrench with ½” Drive Socket

SFM1

Page 6 Installation Manual

Flat Panel Mount Location

WARNING: INVERT THE FLAT PANEL PLACE IT ON A SOFT, FLAT SUFRACE TO PREVENT DAMAGE TO

THE FLAT PANEL. USE A BLANKET, FOAM, ETC. FAILURE TO DO SO WILL RESULT IN

DAMAGING THE FLAT PANEL. DO NOT LAY THE FLAT PANEL ON THE FLOOR WITHOUT ANY

PROTECTION TO THE GLASS. THE FLAT PANEL IS HEAVY AND FRAGILE. AT LEAST (2)

QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS

PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE

TO THE FLAT PANEL.

1. Once the flat panel is inverted, use a measuring tape to find the center of your flat panel measuring

from outside to outside of the chassis (Figure 1).

2. Using a pencil lightly mark the center of your flat panel (Figure 2).

Figure 1. Flat Panel Mount Location Figure 2. Marking the Mount

Mounting Bracket Positioning

1. Install the nylon spacers to the mounting points on the flat panel (Figure 3)

2. Lay the left and right mounting brackets (stamped arrows facing out) (Figure 4).

of Flat Panel

nverted Flat

anel

easurin

ottom of Flat

anel

Inverted Flat

Panel

ark the Center

of the Flat Panel

SFM1

Installation Manual Page 7

Figure 3. Mounting Bracket Positioning

Figure 4. Mounting Bracket Installation

ylon Spacers, If

licable

(

See Chart

)

Inverted Flat Panel

Center Mark

ounting Brackets

ottom of Flat Panel

Arrows Facing OUT

SFM1

Page 8 Installation Manual

NOTE: The mounting guides are designed with a center viewing guide on the side of them. There will be

a “notch” cut on the side of the bracket (Figure 5).

Figure 5. Locating the Center of the Flat Panel

3. Match the center of the viewing guide with the centerline you marked in Step 1 (Figure 6).

Figure 6. Adjusting the Mounting Brackets

Align the Mounting

rackets

ottom of the Flat

Panel

ounting Bracket

ottom of Flat

anel

Center of Viewing

Guide

Center of Flat

Panel

SFM1

Installation Manual Page 9

Griplates™

1. The Griplates™ have M4, M5, M6 and M8 hole patterns to fit the hardware that the flat panel requires.

Examples: If your display uses M8 x 20 Phillips head screws. Use the M8 mounting points (Figure 7).

Figure 7. Griplates™ Orientation

2. Once the mounting brackets are aligned, secure the Griplate™ to the flat panel.

NOTE: The dimples of the top plates have to be facing up and the bottom dimples must be facing down.

Use (1) Griplate™ per mounting point (Figure 8).

NOTE: Leave a ¾” gap on both mounting brackets as shown on this diagram.

CAUTION: Do not over tighten the mounting hardware.

DIMPLES

FACING UP

3/4"

DIMPLES

FACING UP

DIMPLES

FACING DOWN

DIMPLES

FACING DOWN

Figure 8. Griplate™ Attachment

Dimples

Phillips Screw Driver

ottom Flat Panel

SFM1

Page 10 Installation Manual

Wood Stud Location

1. Using a stud finder, locate the 16” or 24” stud centers behind the wall.

2. Once found, make a pencil mark on the center of the wood studs (Figure 9).

NOTE: The wall plates have three 16” and 12” mounting slot positions.

16"

Figure 9. Locating the Wooden Stud

3. Measure from the floor to the desired viewing height and mark the wall (Figure 10).

NOTE: This marking will reference the center of your flat panel display once mounted to the wall.

16"

Figure 130. Measuring the Height

ooden Studs

ehind the Wall

Structure

ooden Studs

Stud Finder

easure and

ark the Desired

iewing Height

on the Wall

Andere Handbücher für SFM1

Inhaltsverzeichnis

Andere Sony Rack & Stand Handbücher

Sony

Sony SU-560 Bedienungsanleitung

Sony

Sony SU-PF2 Bedienungsanleitung

Sony

Sony SU-RS11M Bedienungsanleitung

Sony

Sony SU-W110 Bedienungsanleitung

Sony

Sony SFM2 Bedienungsanleitung

Sony

Sony SU-60DX Bedienungsanleitung

Sony

Sony SURS51U - Stand For Rear Projection TV Bedienungsanleitung

Sony

Sony SU-WL400 Bedienungsanleitung

Sony

Sony SU-34XBR3 Bedienungsanleitung

Sony

Sony WS-FV10D Bedienungsanleitung

Sony

Sony VCT-HM1 Bedienungsanleitung

Sony

Sony PROFORMA PROFORMAWM46 Bedienungsanleitung

Sony

Sony YT-ICB53V Bedienungsanleitung

Sony

Sony SU-GW3 Bedienungsanleitung

Sony

Sony SU-B461S Bedienungsanleitung

Sony

Sony DMBK-R3012 Bedienungsanleitung

Sony

Sony Bravia Theatre Sync RHT-G800 Gebrauchs- und Wartungshandbuch

Sony

Sony SU-WL500 Instructions (SU-WL500 Wall-Mount... Bedienungsanleitung

Sony

Sony LSPX-PS1 Bedienungsanleitung

Sony

Sony SU-46NX1 Bedienungsanleitung

Sony

Sony SPM-42BSA Benutzerhandbuch

Sony

Sony SU-RG11S Bedienungsanleitung

Sony

Sony Walkman BCR-NWA800 Bedienungsanleitung

Sony

Sony SU-PF1 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung