Sony BDX-N1000 Bedienungsanleitung

NETWORK INTERFACE UNIT

BDX-N1000

NETWORK ADAPTER BOARD

BDKP-N1001

NETWORK ADAPTER BOARD

BDKP-N1002

NETWORK ADAPTER BOARD

BDKP-N1003

NETWORK ADAPTER BOARD

BDKP-N1004

MAINTENANCE MANUAL

1st Edition

!WARNING

This manual is intended for qualified service personnel only.

To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so. Refer all servicing to

qualified service personnel.

!WARNUNG

Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.

Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die

Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei

Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen.Andere als die angegeben

Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung

dazu besitzen.

!AVERTISSEMENT

Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien.Afin

de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les

réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.

Pour toute réparation faire appel à une personne compétente uniquement.

BDX-N1000 Serial No.10001 and Higher

BDKP-N1001 Serial No.10001 and Higher

BDKP-N1002 Serial No.10001 and Higher

BDKP-N1003 Serial No.10001 and Higher

BDKP-N1004 Serial No.10001 and Higher

BDX-N1000

1 (P)

Attention-when the product is installed in Rack:

(For BDX-N1000)

1. Prevention against overloading of branch circuit

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

make sure that the rack does not overload the supply

circuit.

2. Providing protective earth

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

confirm that the outlet is provided with a suitable

protective earth connection.

3. Internal air ambient temperature of the rack

When this product is installed in a rack, please make

sure that the internal air ambient temperature of the

rack is within the specified limit of this product.

4. Prevention against achieving hazardous

condition due to uneven mechanical loading

When this product is installed in a rack, please make

sure that the rack does not achieve hazardous

condition due to uneven mechanical loading.

CAUTION

Danger of explosion if battery is incorrectly

replaced.

Replace only with the same or equivalent type

recommended by the manufacturer.

Dispose of used batteries according to the

manufacturer’s instructions.

Vorsicht!

Explosionsgefahr bei unsachgemäßem

Austausch der Batterie.

Ersatz nur durch denselben oder einen vom

Hersteller empfohlenen ähnlichen Typ.

Entsorgung gebrauchter Batterien nach Angaben

des Herstellers.

ATTENTION

Il y a danger d’explosion s’il y a remplacement

incorrect de la batterie.

Remplacer uniquement avec une batterie du

même type ou d’un type équivalent recommandé

par le constructeur.

Mettre au rebut les batteries usagées

conformément aux instructions du fabricant.

ADVARSEL!

Lithiumbatteri-Eksplosionsfare ved fejlagtig

håndtering.

Udskiftning må kun ske med batteri

af samme fabrikat og type.

Levér det brugte batteri tilbage til leverandøren.

(For BDKP-N1002)

Laser Diode Properties

Material : InGaAsP

Wave length : 1300 nm

Emission duration : Continuous

Laser output power (average): 0.16 mW (max.)

CAUTION

The use of optical instruments with this product

will increase eye hazard.

This Network Interface Unit is classified as a CLASS 1

LASER PRODUCT.

The CLASS 1 LASER PRODUCT label is located on the

rear panel.

CLASS 1

LASER PRODUCT

LASER KLASSE 1

PRODUKT

BDX-N1000

1 (E)

BDX-N1000

Table of Contents

Manual Structure

Purpose of this manual ........................................................................................ 3 (E)

Related manuals................................................................................................... 3 (E)

Contents ............................................................................................................... 3 (E)

Trademarks .......................................................................................................... 4 (E)

1. Service Overview

1-1. Notes on Repair Parts............................................................................1-1 (E)

1-2. Removing the Cabinet...........................................................................1-1 (E)

1-2-1. Removing the Top Panel ......................................................1-1 (E)

1-2-2. Removing the Front Panel....................................................1-1 (E)

1-3. Locations of the Main Parts and Boards ...............................................1-2 (E)

1-4. Replacing the Main Parts ......................................................................1-3 (E)

1-4-1. Switching Regulator.............................................................1-3 (E)

1-4-2. Fan Motor .............................................................................1-4 (E)

1-4-3. Lithium Battery ....................................................................1-5 (E)

1-5. Replacing the Printed Circuit Boards....................................................1-6 (E)

1-5-1. IF-694 Board ........................................................................1-6 (E)

1-5-2. CCM-36/36A Board.............................................................1-7 (E)

1-5-3. CCM-40/40A Board.............................................................1-7 (E)

1-6. How to Use the Controller Software .....................................................1-8 (E)

1-7. Circuit Description ..............................................................................1-13 (E)

1-8. Error Message .....................................................................................1-14 (E)

2. Spare Parts

2-1. Exploded Views and Mechanical Parts List................................................2-1

2-2. Electrical Parts List .....................................................................................2-8

3. Semiconductor Pin Assignments

4. Block Diagram

Overall Block..........................................................................................................4-1

2 (E) BDX-N1000

5. Schematic Diagrams

CCM-36 ..................................................................................................................5-2

CCM-36A ...............................................................................................................5-3

CCM-40 ..................................................................................................................5-4

CCM-40A ...............................................................................................................5-6

DP-270....................................................................................................................5-8

DP-271....................................................................................................................5-8

IF-694 .....................................................................................................................5-9

Frame Wiring........................................................................................................5-35

6. Board Layouts

CCM-36/36A ..........................................................................................................6-2

CCM-40/40A ..........................................................................................................6-3

IF-694 .....................................................................................................................6-4

3 (E)

BDX-N1000

Manual Structure

Purpose of this manual This manual is the maintenance manual of the BDX-N1000 Network Interface Unit

and the BDKP-N1001/N1002/N1003/N1004 Network Adapter Boards.

This manual is intended for use by trained system and service engineers.

This manual describes information that premise the service based on component

replacement.

Related manuals Besides this Maintenance Manual, the following manuals are available for the BDX-

N1000.

.Operation Manual (Supplied with the BDX-N1000)

This manual explains the overview of the BDX-N1000, and the system configura-

tion examples.

.Installation Manual (Supplied with the BDX-N1000)

This manual describes information regarding installation.

Contents The following is a summary of all the sections for understanding the contents of this

manual.

Section 1 Service Overview

Explains the removal of cabinet, how to replace the parts and boards, etc.

Section 2 Spare Parts

Describes the spare parts list.

Section 3 Semiconductor Pin Assignments

Describes the pin assignments of semiconductors.

Section 4 Block Diagram

Describes the overall block diagram.

Section 5 Schematic Diagrams

Describes the schematic diagrams of the IF-694, CCM-36/36A and CCM-40/40A

boards, and frame wiring.

Section 6 Board Layouts

Describes the board layouts of the IF-694, CCM-36/36A and CCM-40/40A boards.

4 (E) BDX-N1000

Trademarks Registered trademarks used in this manual are follows.

.Ethernet is a registered trademark of Xerox Corporation.

.Windows is a registered trademark of Microsoft Corporation.

.IBM and AT are registered trademarks of International Business Machines

Corporation.

1-1 (E)

BDX-N1000

1-1. Notes on Repair Parts

1. Safety Related Components Warning

Components marked !are critical to safe operation.

Therefore, specified parts should be used in the case of

replacement.

2. Standardization of Parts

Some repair parts supplied by Sony differ from those

used for the unit. These are because of parts common-

ality and improvement.

Parts list has the present standardized repair parts.

3. Stock of Parts

Parts marked with “o” at SP (Supply Code) column of

the spare parts list may not be stocked. Therefore, the

delivery date will be delayed.

4. Units Representation

The following represented units are changed or

omitted in writing.

Units Representation

Capacitance µFuF

Inductance µHuH

Resistance ZAbbreviation

Temperature dCXXX-DEG-C

5. Replacement of Optional Boards

If it is necessary to replace the optional board, please

place an order the BDKP-Nxxxx through the sales

route.

.CCM-36 board : BDKP-N1001

.CCM-36A board : BDKP-N1002

.CCM-40 board : BDKP-N1003

.CCM-40A board : BDKP-N1004

Section 1

Service Overview

Top panel

BDX-N1000

B 4x6

1-2. Removing the Cabinet

1-2-1. Removing the Top Panel

1. Turn off the main power and remove the AC plug from

the outlet.

2. Remove the six screws (B 4x6) and remove the top

panel.

1-2-2. Removing the Front Panel

1. Turn off the main power and remove the AC plug from

the outlet.

2. Remove the two screws (RK 3x8) and the two wash-

ers. Remove the front panel to the front.

Washer

RK 3x8

Front panel

RK 3x8

1-2 (E) BDX-N1000

1-3. Locations of the Main Parts and Boards

Circuit Configuration

Board name Main function

1IF-694 board ATM board

2DP-271 board LED board

3DP-270 board Display board

4DP-131 board Indicator light board

5CCM-36 board (BDKP-N1001) ATM interface board (Multi Mode Fiber)

6CCM-36A board (BDKP-N1002) ATM interface board (Single Mode Fiber)

7CCM-40 board (BDKP-N1003) ATM interface board (DS3)

8CCM-40A board (BDKP-N1004) ATM interface board (E3)

1-3. Locations of the Main Parts and Boards

Optional boards

5CCM-36 board

6CCM-36A board

7CCM-40 board

8CCM-40A board

4DP-131 board

3DP-270 board

2DP-271 board

1IF-694 board

Fan motor

Switching regulator

Andere Handbücher für BDX-N1000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Aufnahmegeräte Handbücher

Sony

Sony BKPF-L632 Bedienungsanleitung

Sony

Sony SIU-100 Bedienungsanleitung

Sony

Sony PCM-D50 - Portable Linear Pcm Recorder Bedienungsanleitung

Sony

Sony XE-90 MkII Bedienungsanleitung

Sony

Sony PCM-3348HR Bedienungsanleitung

Sony

Sony SEQ-431 Bedienungsanleitung

Sony

Sony Video Walkman GV-S50 Bedienungsanleitung

Sony

Sony IFB-40 Bedienungsanleitung

Sony

Sony MSU-1000 Bedienungsanleitung

Sony

Sony Memory Stick PRO Duo MS-MT Series Bedienungsanleitung

Sony

Sony PDW-HD1550 Bedienungsanleitung

Sony

Sony CXFD-S03CP Bedienungsanleitung

Sony

Sony PCM-D100 Bedienungsanleitung

Sony

Sony SEQ-300 Bedienungsanleitung

Sony

Sony WX-C55 Bedienungsanleitung

Sony

Sony AS-FCB-HDSDI-IFKIT Series Bedienungsanleitung

Sony

Sony PFV-L10 Bedienungsanleitung

Sony

Sony SVR-HDT1000 Bedienungsanleitung

Sony

Sony DMX-R100 Bedienungsanleitung

Sony

Sony TC-177SD Einrichtungshandbuch

Sony

Sony RCD-W222ES - Cd/cdr Recorder Bedienungsanleitung

Sony

Sony PCM-R300 Bedienungsanleitung

Sony

Sony CAV-1 Primary Bedienungsanleitung

Sony

Sony AWS-G500HD Anycast Station Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch