Sony Remote Commander Bedienungsanleitung

3-864-441-11(1)

Remote

Commander

Operating Instructions

 1998 by Sony Corporation

RM-LJ301

Precautions

On safety

Should any solid object or liquid fall into the cabinet, unplug the

receiver and have it checked by qualified personnel before

operating it any further.

On operation

Before connecting other components, be sure to turn off and

unplug the receiver.

On cleaning

Clean the cabinet, panel and controls with a soft cloth slightly

moistened with a mild detergent solution. Do not use any type of

abrasive pad, scouring powder or solvent such as alcohol or

benzine.

If you have any question or problem concerning your

receiver, please consult your nearest Sony dealer.

About This Manual

The instructions in this manual are for model RM-LJ301.

Check your model number by looking at the lower left

corner of the front side.

Conventions

The following icon is used in this manual:

zIndicates hints and tips for making the task easier.

TABLE OF CONTENTS

Location of Parts and Basic Remote

Operations 4

Parts Description 4

Using the Lists 12

Chart of Lists 13

Selecting a Component 14

Selecting a Sound Field 15

Programming the Remote 15

Downloading Data From the Receiver 16

Other Operations 17

Additional Information 18

Troubleshooting 18

Specifications 19

Before You Use Your

Remote

Check that you received the following item with the

remote:

LR6 (size-AA) alkaline batteries (3)

Inserting batteries into the remote

Insert three LR6 (size-AA) alkaline batteries with the +

and – properly oriented in the battery compartment.

When using the remote, point it at the remote sensor gon

the receiver.

}

]]

}}

]

zWhen to replace batteries

Under normal conditions, the batteries should last for about 3

months. When the remote no longer operates the receiver,

replace all the batteries with new ones.

Notes

• Do not leave the remote in an extremely hot or humid place.

• Do not use a new battery with old ones.

• Do not mix the alkaline batteries and other kinds of batteries.

This remote is designed for use with the alkaline batteries only.

• Do not expose the remote sensor of the receiver to direct

sunlight or lighting apparatuses. Doing so may cause a

malfunction.

• If you don’t use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

Setting up the remote

At the time of shipping, the remote has not been

customized to your receiver yet. Before you use the

remote for the first time, do the procedure below to set

up the remote so that it can control your receiver

properly.

1Press 1/u on the receiver to turn it on.

2Point the remote towards the receiver and press

SOUND FIELD, FUNCTION, or SUB.

and appear in the display window of the

remote while it communicates with the receiver and

identifies the receiver model.

When the communication ends, the remote is

customized and provides the operation lists that

match your receiver.

Parts Description

Location of

Parts and Basic

Remote

Operations

This chapter provides information on

the location of buttons and how to use

them to perform basic operations.

Open up the cover.

!¡

3++

––

LEVEL

CENTER

SLEEPSHIFT

D.TUNING

- / -- ENTER

REAR

TEST

TONE S.FIELD

ON/OFF

EQ/TONE

ON/OFF

CURSOR

MODE GUIDE

654

987

0>10

EXIT/RETURN

EXECUTE

AV 1/u

FUNCTION

SET UP

SOUND FIELD

SYSTEM STANDBY

PUSH ENTER

SUB

BASS

BOOST MASTER

VOL

MUTING

CH/PRESET/D.SKIP

ª

·

–+

–

Location of Parts and Basic Remote Operations

1AV 1/u switch

Press to turn on or off the components that the remote

is programmed to operate. For details on

programming procedure, see“Programming the

Remote” on page 15.

2Display window

The current status of the selected component or a list

of selectable items appears here.

3SYSTEM STANDBY switch

Press to turn off the receiver and other Sony audio/

video components at the same time. If you want to

change the function of the SYSTEM STANDBY switch

so that it turns on or off the receiver only, see page 16.

Note

Before you turn on the receiver, make sure that you have

turned the MASTER VOLUME control on the receiver to the

leftmost position to avoid damaging your speakers.

4MASTER VOL +/– buttons

Press to adjust the volume level of all speakers at the

same time.

5SLEEP button

Press repeatedly to activate the sleep function and

select the duration after which the receiver turns off

automatically.

6MUTING button

Press to mute the sound. The MUTING indicator on

the receiver lights up when the sound is muted.

7SOUND FIELD button

Press to display the sound field list. Press again to

revert back to the component information.

8FUNCTION button

Press to display the function (component) list. Press

again to revert back to the component information.

See the table on page 9 for information on the buttons

you can use to control each component.

If you want to change the contents of a function list to

match your particular components, do the procedure

“Programming the Remote” on page 15.

Note

After you have selected the VCR or DVD player, turn on the

TV and set the TV’s video input to match the component you

selected.

9SET UP button

Press to display the set up list. Press again to revert

back to the component information.

0SUB button

While operating a component, press to display a list of

operations that the corresponding buttons are not

found on the remote. Then move the easy scroll key to

select the operation, and then press the key to enter

the selection. Press again to revert back to the

component information.

See the table on pages 10 and 11 for information on the

operations that appear when you press the SUB

button.

!¡ Easy scroll key

While displaying a list, move up or down to select an

item from the list, and then press to enter the selection.

Location of Parts and Basic Remote Operations

Parts Description

Open up the cover.

!™ Tape/disc operation buttons

The following table shows what components are

operated by each button and the function of the

buttons.

Button(s) Component(s) Function

·VCR, DVD player,

LD player, video CD

player, tape deck,

MD deck, CD player,

DAT deck

Starts play of the

playback medium

ªTape deck Starts play on the reverse

side of the cassette

PVCR, DVD player,

LD player, video CD

player, tape deck,

MD deck, CD player,

DAT deck

Pauses play or recording

or starts recording when

the component is in

recording standby

pVCR, DVD player,

LD player, video CD

player, tape deck,

MD deck, CD player,

DAT deck

Stops play

=/+VCR, DVD player,

LD player, video CD

player, tape deck

(deck B only) , MD

deck, CD player,

DAT deck

Skips tracks

0/)VCR, LD player, tape

deck, MD deck, DAT

deck

Fastwinds or rewinds

DVD player, LD

player, video CD

player, CD player

Searches tracks in the

forward or backward

direction

See the table on page 9 for information on the buttons

that you can use to control each component.

!£ CH/PRESET/D.SKIP +/– buttons

Press repeatedly to select a preset station, channel,

track, or a disc.

!¢ LEVEL CENTER +/– buttons

Press to adjust the volume level of the center speaker.

!∞ LEVEL REAR +/– buttons

Press to adjust the volume level of the rear speakers.

@™

@º

!¶

!§

!∞

!•

!¢

!£

!™

@¡

!ª

@£

3++

––

LEVEL

CENTER

SLEEPSHIFT

D.TUNING

- / -- ENTER

REAR

TEST

TONE S.FIELD

ON/OFF

EQ/TONE

ON/OFF

CURSOR

MODE GUIDE

654

987

0>10

EXIT/RETURN

EXECUTE

AV 1/u

FUNCTION

SET UP

SOUND FIELD

SYSTEM STANDBY

PUSH ENTER

SUB

BASS

BOOST MASTER

VOL

MUTING

CH/PRESET/D.SKIP

ª

·

–+

–

Location of Parts and Basic Remote Operations

!§ S.FIELD ON/OFF button

Press to turn the sound field on or off.

!¶ EQ/TONE ON/OFF button

Press to turn the equalizer or tone effect on or off. The

TONE indicator on the receiver lights up when the

effect is turned on.

Note that if you have adjusted the equalization or tone

using the CURSOR MODE button and cursor buttons,

the adjusted equalization or tone will be produced

whenever you turn on the equalizer or tone effect.

!• TEST TONE button

Press to output a test tone.

!ª Cursor buttons (V/v/B/b)

After pressing the CURSOR MODE button or SET UP

button on the receiver, use the cursor buttons to make

specific settings. For details refer to the Operating

Instructions supplied with your receiver.

To perform menu operations on the VCR, DVD player,

or DBS tuner, do the procedure below. If you don’t do

this, the cursor buttons merely operate the receiver.

1Press FUNCTION and move the easy scroll key to

select the VCR, DVD player, or DBS tuner.

2Open up the cover on the remote.

CURSOR TYPE list appears.

If the list has disappeared before you go on to Step

3, press any of the cursor buttons to restore the list.

3Move the easy scroll key to select the component

that you selected in Step 1, then press the key to

enter the selection.

EXECUTE button

After pressing the MENU or GUIDE button, use the

cursor buttons to select a menu item, then press the

EXECUTE button to enter the selection.

EXIT/RETURN button

Press to return to the previous menu or exit the menu

while VCR, DVD, or DBS menu or DBS guide is

displayed on the TV screen.

@º CURSOR MODE button

Press repeatedly to select SURROUND, BASS/

TREBLE (or EQ), or INDEX cursor mode. The

indicator for the selected cursor mode on the receiver

lights up.

@¡ D.TUNING ENTER button

If you have selected tuner:

Press to enter Direct Tuning mode. For details on

Direct Tuning procedure, refer to the Operating

Instructions supplied with your receiver.

If you have selected VCR, DVD player, LD player,

TV, DBS tuner, tape deck, MD deck, CD player, or

DAT deck:

After selecting a channel, disc, or track using the

numeric buttons, press this button to enter the

selection. For details, refer to the Operating

Instructions supplied with your receiver.

@™ SHIFT >10 -/-- button

If you have selected tuner:

Press repeatedly to select a memory page for

presetting radio stations or tuning to preset stations.

If you selected VCR, TV, LD player, video CD player,

tape deck, MD deck, or CD player:

Press before inputting a channel, disc, or track number

of eleven or higher. For details, refer to the operation

manual supplied with the respective components.

@£ Numeric buttons (1 to 0)

Inputs the correponding numeric value. On some

components, pressing 0 selects 10. For details, refer to

the operation manual supplied with the respective

components.

Location of Parts and Basic Remote Operations

Parts Description

@∞

@¢

3++

––

LEVEL

CENTER

SLEEPSHIFT

D.TUNING

- / -- ENTER

REAR

TEST

TONE S.FIELD

ON/OFF

EQ/TONE

ON/OFF

CURSOR

MODE GUIDE

654

987

0>10

EXIT/RETURN

EXECUTE

AV 1/u

FUNCTION

SET UP

SOUND FIELD

SYSTEM STANDBY

PUSH ENTER

SUB

BASS

BOOST MASTER

VOL

MUTING

CH/PRESET/D.SKIP

ª

·

–+

–

@¢ MENU button

When you have selected the VCR, DVD player, or DBS

tuner, press this buton to display VCR, DVD, or DBS

menu on the TV screen. Then use the cursor buttons

to perform the menu operations (see “!ª Cursor

buttons (V/v/B/b),” “EXECUTE button,” and

“EXIT/RETURN button” on page 7).

Note

When you have selected VCR, the remote is set to control the

VCR that corresponds with VCR 1 after you press the MENU

button. Before pressing the button, make sure to set the VCR

input mode to VCR 1.

GUIDE button

Press to display the DBS guide. Then use the cursor

buttons on the remote to perform the menu operations

(see “!¶ Cursor buttons (V/v/B/b),” “EXECUTE

button,” and “EXIT/RETURN button” on page 7).

@∞ BASS BOOST button

Press to increase the bass of the front speakers. The

BASS BOOST indicator on the receiver lights up when

the function is turned on.

Location of Parts and Basic Remote Operations

Table of buttons used to control each component

When you program the remote to control the following Sony or non-Sony components, you can use the buttons on the

remote that are marked with circles. Note, however, that some buttons may not operate your component.

Component VCR (VHS,

Beta,

8mm)

DBS

tuner DVD

player LD player TV Tuner Video

player

player MD

deck DAT

deck Tape

deck (A

and B)

Button

AV 1/u rrrrr rrr

SUB*rrrrrrrrrrr

ª r

· r rr rrrrr

P r rr rrrrr

p r rr rrrrr

=/+ r rr rrrrr**

0/) r rr rrrrr

CH/PRESET/D.SKIP +/–

rrr rrrrr

Cursor buttons rrr

MENU rrr

GUIDE r

Numeric buttons rrrrrrrrrrr

SHIFT >10 -/-- r rrrrrr r

D.TUNING ENTER rrrrrr rrrr

EXIT/RETURN rr

EXECUTE rrr

*For information on the operations that become available when you press the button, see the table on page 9.

**Deck B only.

zIf you have assigned TV to the USER 1 or 2 item in the IR SET

list (see page 16)

The remote is set to operate TVs only. In this case, only the

following buttons are operable:

• CH/PRESET/D.SKIP +/– buttons

• MASTER VOL +/– buttons

• MUTING button

• Numeric buttons

• SHIFT >10 -/-- button

• D.TUNING ENTER button

Location of Parts and Basic Remote Operations

Parts Description

Table of operations that appear when you press the SUB button

Press the SUB button to display a list of operations that the corresponding buttons are not found on the remote. The

contents of the lists will vary according to the currently selected component. The following table shows the items in each

list and the function of each item.

Component Item(s) Function

VCR Starts recording

ANT TV/VTR Selects the signal to be

output from the antenna

terminal of the VCR (TV

signal or video signal)

DISPLAY Selects information displayed

on the TV screen

INPUT SEL. Changes the input mode of

the VCR

SP/LP Selects the playback speed

REC

DBS tuner JUMP Toggles between the

previous and current

channels

DISPLAY Selects information displayed

on the TV screen

ANT TV/DBS Selects the signal to be

output from the antenna

terminal of the VCR (TV

signal or DBS signal)

FAVORITE Displays the Favorite Station

Guides

CATEGORY Displays the Guide Category

list

INDEX Displays the Station Index

DVD player TITLE Displays the Title menu. For

details on the menu

operation, see “To perform

title and set up menu

operations on the DVD

player” on page 11.

DISPLAY Selects information displayed

on the TV screen

MENU Displays the Set up menu.

For details on the manu

operation, see “To perform

title and set up menu

operations on the DVD

player” on page 11.

SUB-TITLE Displays the Subtitles

S.TITLE CHG Changes the Subtitle

Language

AUDIO CHG Changes the sounds

SEARCH Changes the search mode

CLEAR Returns to the Continuous

Play etc.

Component Item(s) Function

LD player SIDE Aa) Selects side Aof the disc

SIDE Ba) Selects the side B of the disc

DISPLAY Selects information displayed

on the TV screen

PROGRAM Programs the tracks

REPEAT Repeats current track or

programmed tracks

TV JUMP Toggles between the

previous and current

channels

DISPLAY Selects information displayed

on the TV screen

TV/VTR Changes the input mode of

the TV

P IN Pb) Activates the picture-in

picture functionc)

POSITIONb) Changes the position of the

small picturec)

SWAPb) Swaps the small and large

picturesc)

WIDEb) Selects the wide-picture

moded)

SUB CH +b) Selects preset channels for

the small picturec)

Tuner

SUB CH –b)

FM/AM Selects the FM or AM band

VIDEO CD

player TIME Changes the time

information

CD player DISC Selects a disce)

TRACK Selects a tracke)

CONTINUE Selects Continuous Play

SHUFFLE Selects Shuffle Play

PROGRAM Selects Program Play

REPEAT Selects Repeat Play

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Fernbedienung Handbücher

Sony

Sony RM-V210 - Universal Remote Bedienungsanleitung

Sony

Sony RM-V201 Bedienungsanleitung

Sony

Sony PlayStation CFI-ZMR1 Bedienungsanleitung

Sony

Sony RM-V701 Bedienungsanleitung

Sony

Sony RMT-DSLR2 Bedienungsanleitung

Sony

Sony RM-DC2 Bedienungsanleitung

Sony

Sony Bravia KE-55XH9005 Betriebsanleitung

Sony

Sony SVT-RM10 Bedienungsanleitung

Sony

Sony RM-V8A Bedienungsanleitung

Sony

Sony Live-View Remote RM-LVR1 Bedienungsanleitung

Sony

Sony RMF-TX800U Bedienungsanleitung

Sony

Sony RM-AX4000 - Integrated Remote Commander Administratorhandbuch

Sony

Sony MARINE RM-X11M Bedienungsanleitung

Sony

Sony RM-V210T Bedienungsanleitung

Sony

Sony VCT-VPR1 Bedienungsanleitung

Sony

Sony RM-D11P Bedienungsanleitung

Sony

Sony RM-VZ320 - Remote Commander Bedienungsanleitung

Sony

Sony RM-V402 Bedienungsanleitung

Sony

Sony RM-KZ1 Operating Instructions and Manufacturers Code... Bedienungsanleitung

Sony

Sony RM-V301 Operating Instructions (primary... Bedienungsanleitung

Sony

Sony RM-IP500 Bedienungsanleitung

Sony

Sony RM-AV2000T Bedienungsanleitung

Sony

Sony RM-VL610A (RM-VL610A Remote Commander®) Administratorhandbuch

Sony

Sony RMF-TX900B Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung