— 10 —
SAT-A55/B55
72
Problem What you can do
Poor picture quality or no picture • If you are receiving only a few stations, (only 2 or 3 channels for
example), call your service provider to have your programming
activated.
• Some pay per view programs may be protected by Macrovision
®
copy protection at the discretion of the copyright owner. You
may want to connect the Digital Satellite Receiver directly to
your TV.
• Check the connections to your TV and other equipment
(see pages 7–13).
• Make sure that your TV and other equipment are set to the input
source to which you connected your Digital Satellite Receiver, for
example, channel 3 or 4, Video 1 or 2 (see pages 9–10).
• Check the Satellite Dish Antenna’s signal strength (see page 23).
• Make sure the RG-6 coaxial cable is properly connected to the
Satellite Dish Antenna.
•IfthecabledistancebetweentheSatelliteDishAntennaandthe
Digital Satellite Receiver is more than 100 feet, you must use the
Sony Amplifier EAC-DA1.
• Make sure your Access Card is inserted correctly (see page 13).
• Move any antenna cables that may be directly above your Digital
Satellite Receiver.
• Change the setting of the CH3/CH4 switch on the back of the
Digital Satellite Receiver. This could improve picture quality only
if you are using the UHF/VHF IN jack of the Digital Satellite
Receiver to connect a local TV antenna or cable company service.
Poor picture quality or no picture when
it rains or snows • Heavy rain or snow may degrade the strength of the signal
coming from the satellite to your Satellite Dish Antenna. To limit
any negative effects during degraded conditions, make sure that
your professional installer has aimed your Satellite Dish Antenna
so that you are receiving a high signal strength level (see page 23,
or refer to your Satellite Dish Antenna Installation Instructions).
You cannot turn on the unit • Make sure that the AC Power Cord is plugged in (see page 13).
• If the AC Power Cord is plugged in, unplug the AC Power Cord,
wait a few minutes, then plug in the AC Power Cord again.
You cannot access a program • Make sure you subscribe to the station you are trying to access.
Your service provider can tell you to which stations you
subscribe.
• Make sure the station you are trying to access is not set to be
skipped (see pages 50–51).
• Make sure the system is not locked (see page 58).
• Use the Program Guide to access the station (see page 37).
• Press the SAT FUNCTION button on the remote control before
you select a channel (see page 20).
Troubleshooting
7
You cannot order a pay per view program • Make sure your Digital Satellite Receiver is connected to a
telephone line (see page 8).
• Make sure the system is not locked (see page 58).
• Use the Program Guide to access the station (see page 37).
• If the message “Purchase information not available” appears,
youmustcontactyourserviceprovidertoordertheprogram.
• Your Access Card may be full. If so, contact your service
provider.
•Itmaybetoolatetoordertheprogramyouwant.Ifso,checkfor
other show times (see page 45).
You cannot find the station of the pay per
view program that you ordered • See “Checking Pay Per View Purchases” on page 59 to get
information (station, start time, etc.) about programs that you
have ordered.
You cannot cancel a pay per view order • You cannot cancel pay per view orders that you have watched.
Contact your service provider for details.
The program highlighted in the Program
Guide does not appear • Highlight and select the program. Although the program you
highlight appears in the Media Window display, you must press
the button to complete your selection (see page 37).
You cannot see any Favorite Stations • Set up your personal Favorite Titles before you try to use the
Favorite Stations guide (see page 41).
Locks & Limits feature not working properly • Make sure that the Spending, Rating, Pay Per View, and Stations
Blocked are set as you want them (see pages 53–56). Then, make
sure that the system is locked (see page 57).
You cannot access the Locks & Limits screens • The system must be unlocked before you can make changes to
the Locks & Limits (see page 58).
You cannot unlock the system • Make sure that you entered the passcode correctly. If you have
lost or forgotten your passcode, contact your service provider.
Language of audio track is incorrect or audio
track is not available • Check the default language setting. The program provider may
not broadcast all of the languages in the Default Audio pop-up
(see page 64).
• Some programs may not offer audio tracks.
Problem What you can do
continued
