Sony Dualshock 3 Bedienungsanleitung

Congratulations on purchasing the World’s Fastest Rapid Fire, Fact! We are sure you will love all

the Arbiter 3 has to offer, and we are always welcome of suggestions on improvements and

extra features if you find anything is missing, so don’t hesitate to get it touch.

Getting to know your controller

At first you may be wondering how on earth the A3 works when there appears to be no extra

buttons, holes, or anything out of the ordinary from the outside. Well, the A3 is totally stealth

which means unless you know it is there and you want to use it, you wouldn’t otherwise know it

was there.

The A3 is turned on and configured primarily with the R1, Start and Left D-Pad buttons, with

more advanced features described later using other buttons too.

r= R1 R= R2 l= L1 L= L2 A= Start b= Select

1234 = D-Pad Direction Buttons XSCT = Action Buttons

! IMPORTANT !

When turning on controller do not press any buttons while the Player 3 indicator is flashing. The

chip initializes when the controller is first turned on and needs all triggers to be released.

Activating

Before the chip is ready to respond to any command, you must tell it to “activate”and become

ready to receive a command. To activate hold rand tap the A(Start) button. As you do

this the Player 4 indicator light will come on.

Selecting Modes

To select a mode, first activate the chip by holding rand tapping the A(Start) button so

the Player 4 LED comes on. You must activate the chip each time you want to change modes.

With the chip activated and the Player 4 LED turned on, hold rdown and keep tapping the

2(Left D-Pad) button however many times for the mode you want, and then release r.

To select Mode 11 you would hold r, tap 211 times, and then release r. The Player 3

LED will flash with each press of 2, and then when releasing rwill flash back the mode

number to confirm you are doing things correct. Slow flashes = 10, fast flashes = 1, so mode 11

is one slow flash, one fast flash.

Quick Enable / Disable

If at any point you want to quickly disable the chip, activate the chip (r+a) then press 2

without any other buttons pressed. The light will flash rapidly several times then go off. The

chip is now disabled. If you were previously in a mode and want to quickly get everything back

on, repeat the steps and it will re-enter where you left off.

Chip Modes

One feature that makes the Arbiter 3 Elite Controllers so powerful (not available on A3 LiTE

controllers) is the ability to totally change its list of modes, effectively making the chip like a

whole new product. For example some chips on the market have modes specifically for Call of

Duty, others a general all-rounder’s, but no other chip has the ability to be all of those in one.

This is what the A3 ‘Chip Select’ is. You can change the A3 into a Specific List of modes that

best suit you!

Master Reset

As the Arbiter 3 has many Features that can be turned on and off and rapid fire speeds and

other timings that can be adjusted by the user sometimes you just want to factory restore the

chip to the beginning in case you forget that is active and what is altered.

To master reset the chip, activate (r+a) then hold down S+2for 6 seconds. After 6

seconds the light will fade in then fade out (pulse). Your chip is now reset.

LiTE Modes

1. Ultra Fire

2. Rapid Fire

3. Rapid Fire (3 Burst)

4. Ultra Fire + Drop Shot (LT Cancellation)

5. Drop Shot + Aim (LT Cancellation)

6. Rapid Fire + Drop Shot + Aim (LT Cancellation)

7. Ultra Fire + Jump Shot (LT Cancellation)

8. Jump Shot + Aim (LT Cancellation)

9. Rapid Fire + Jump Shot + Aim (LT Cancellation)

10.User Programming Mode

11.Rapid Fire + Auto-Fast Reload + Aim

12.Dual Trigger

13.Quick Scope (3 Burst)

14.Combi Mode (Press LT: Rapid Fire, Press RT: Aim)

Arbiter 2 Modes**

1. Ultra Fire

2. Auto Aim

3. Rapid Fire + Auto Aim

4. Rapid Fire

5. Combi Mode (Press LT: Rapid Fire, Press RT: Auto Aim)

6. Rapid Fire + Auto Aim (5 Shot Burst)

7. Rapid Fire (5 Shot Burst)

8. Rapid Fire + Aim

9. Dual Trigger

10.User Programming Mode

** Only available on Elite controllers

Elite Modes

RAPID FIRES ( r)

1. Rapid Fire

2. Rapid Fire Alternate

3. Rapid Fire GTA + Aim

4. Ultra Fire

5. Dual Trigger

6. Aim

7. Rapid Fire + Aim

8. Rapid Fire 3 Burst

9. Ultra Fire + Drop Shot + Aim (LT Cancellation)

10. User Programming Mode

DROP SHOTS ( r+C)

11. Drop Shot

12. Rapid Fire + Drop Shot

13. Ultra Fire + Drop Shot

14. Drop Shot (LT Cancellation)

15. Rapid Fire + Drop Shot (LT Cancellation)

16. Ultra Fire + Drop Shot (LT Cancellation)

17. Drop Shot + Fast Reload

18. Drop Shot + Auto-Fast Reload

19. Rapid Fire + Drop Shot + Fast Reload

20. Rapid Fire + Drop Shot + Auto-Fast Reload

DROP SHOTS + AIM ( r+l+C)

21. Drop Shot + Aim

22. Rapid Fire + Drop Shot + Aim

23. Drop Shot + Aim (LT Cancellation)

24. Rapid Fire + Drop Shot + Aim (LT Cancellation)

25. Drop Shot + Fast Reload + Aim

26. Drop Shot + Auto-Fast Reload + Aim

27. Rapid Fire + Drop Shot + Fast Reload + Aim

28. Rapid Fire + Drop Shot + Auto-Fast Reload + Aim

29. Drop Shot + Auto Aim

30. Rapid Fire + Drop Shot + Auto Aim

JUMP SHOTS ( r+X)

31. Jump Shot

32. Rapid Fire + Jump Shot

33. Ultra Fire + Jump Shot

34. Jump Shot (LT Cancellation)

35 Rapid Fire + Jump Shot (LT Cancellation)

36. Ultra Fire + Jump Shot (LT Cancellation)

37. Jump Shot + Fast Reload

38. Jump Shot + Auto-Fast Reload

39. Rapid Fire + Jump Shot + Fast Reload

40. Rapid Fire + Jump Shot + Auto-Fast Reload

JUMP SHOTS + AIM ( r+l+X)

41. Jump Shot + Aim

42. Rapid Fire + Jump Shot + Aim

43. Jump Shot + Aim (LT Cancellation)

44. Rapid Fire + Jump Shot + Aim (LT Cancellation)

45. Jump Shot + Fast Reload + Aim

46. Jump Shot + Auto-Fast Reload + Aim

47. Rapid Fire + Jump Shot + Fast Reload + Aim

48. Rapid Fire + Jump Shot + Auto-Fast Reload + Aim

49. Jump Shot + Auto Aim

50. Rapid Fire + Jump Shot + Auto Aim

AUTO AIMS ( r+l)

51. Combination Mode (LT = Rapid Fire, RT = Aim)

52. Auto Aim

53. Auto Aim on LT

54. Fast Reload + Auto Aim

55. Auto-Fast Reload + Auto Aim

56. Rapid Fire + Auto Aim

57. Ultra Fire + Auto Aim

58. Rapid Fire + Fast Reload + Auto Aim

59. Rapid Fire + Auto-Fast Reload + Auto Aim

60. Ultra Fire + Auto-Fast Reload + Auto Aim

FAST RELOADS ( r+S)

61. Fast Reload

62. Auto-Fast Reload

63. Rapid Fire + Fast Reload

64. Rapid Fire + Auto-Fast Reload

65. Fast Reload + Aim

66. Auto-Fast Reload + Aim

67. Rapid Fire + Fast Reload + Aim

68. Rapid Fire + Auto-Fast Reload + Aim

69. Rapid Fire Alternate + R2 Fast Reload

70. Rapid Fire Alternate + R2 Auto-Fast Reload

SPECIALS( r+l+S)

71. 2 shots per second

72. Ultra Fire Alternative

73. Combi Legacy (LT = Rapid Fire, RT = Auto Aim)

74. Quick Scope

75. Quick Scope (3 Burst)

76. Quick Scope + Rapid Fire

77. Quick Scope Tap Shot (Hold Cancel*)

78. Quick Scope Tap Shot

* Hold Cancel: This means if you hold L1 for longer than

it would be before it tap shots (default 1/3rd of a second)

then it won’t fire. This allows you to use Tap Shot mode

and still aim without firing if needed.

Chip Modes: Selecting the list of modes

This step is optional and only needs to be done each time you want to change the list of modes.

As standard the chip comes in LiTE mode. If at this stage you want to swap your list of modes

(Lite, Full, A2 etc…) then do the following after activating the chip.

To select Elite or Lite mode, hold 2(Left D-Pad) for 5 seconds.

To select Arbiter 2 mode, hold Xbutton and then 2for 5 seconds.

After the 5 seconds the Player 3 LED will flash a certain number of times to indicate the mode.

1 flash is Full, 2flashes is Arbiter 2 and 4flashes is LiTE.

Once you are in that chip select, that is it, you are good to go and don’t have to change it until

you want to change chips, even after the battery is removed. So select your desired chip once,

and then start using it. We recommend basic LiTE mode to begin with, which is what all

controllers are setup to be as default.

Quick Select

In Full mode only, because there are 70+ modes you don’t want to be pressing 270 times,

instead of just holding r, each mode section has “activator buttons” so you can get there

quicker. For example a Drop Shot + Aim section has r+l+C(R1+L1+Circle) in the title,

and 10 modes in that section.

To get to Mode 6 within that list first activate the chip (r+a) then instead of holding r

and tapping 2you hold r+l+C, then tap 26 times and release the buttons.

Tactile Layout / Battlefield 3

Some users like to use alternate button layouts for the games. For Call of Duty the popular

alternative is Tactile Layout, which swaps the Drop button and Knifing button (Cand right

thumbstick) around, so Cwill knife and the right thumb will drop. For Battlefield 3 the

dropping is by default the right thumb stick.

Obviously this causes problems with the Drop Shot feature.

Now when you use Drop Shots with remapping turned on, it will use the right thumb stick for

any Cactions like Drop Shot.

To enable Tactile-Remapping, activate the chip (r+a) then hold down the right thumb

stick (click it down) and tap 2. The Player 3 LED will flash twice to say it is enabled, and once

to say it is disabled. Each time you do this it will switch between being turned on or off.

Battlefield Auto-Spot

A much desired feature for you Battlefield fans is Auto-Spot. In a multiplayer game or

Campaign, you can ‘spot’ enemies by looking at them and pressing b. This can be very

difficult to do during gameplay as the bbutton is in a difficult spot. On top of that you also

want to start shooting the enemy not just spotting them.

What Auto-spot does is as soon as you press lto look down your weapon, or even when you

shoot with rthe chip will start spotting for you (pressing b) thereby instantly spotting any

enemy you every shoot or look at!

As some of you may know, pressing btoo often results in you getting blocked for a few

seconds from spotting. Don’t worry – the A3 chip bypasses all of that and you never get a block.

To enable Auto-Spot, activate the chip (r+a) then hold down band tap 2. The Player

3 LED will flash twice to say it is enabled, and once to say it is disabled. Each time you do this it

will switch between being turned on or off.

Auto-Stand

In Drop-Shot modes, after dropping you to the floor and releasing rthe chip automatically

stands you back up. If you would prefer it to leave you down after releasing rthen you can

toggle the feature on/off.

To turn on/off Auto-Stand, activate the chip (r+a) and then hold down Cand tap 2.

When you do this the Player 3 LED will flash twice to say it is turned on, or once to say it is

turned off.

Auto-Run

One of the little hidden extras of the A3 is a new feature called Auto-Run. How annoying is it

that you have to click in the left thumb stick all the time to run in games like Call of Duty? Not

only that but it increases the wear on your controller. Not any more, not with Auto Run!

With Auto-run turned on all you need to start running is press and release l. Now when you

push up on the left thumb stick you will instantly run continually. To de-activate a run just press

any other button such as XSCTretc… To activate it again and start running just

press lagain.

To turn on/off Auto-Run, activate the chip (r+a) and then hold down the left thumb stick

(click it down) and tap 2. When you do this the Player 3 LED will flash twice to say it is turned

on, or once to say it is turned off. Each time you do this it will switch between being turned on

or off.

Adjusting Speed

One of the best things about the Arbiter 3 is every single mode that uses Rapid Fire or timings

can have its speed completely customized for future proof games.

As default the speed of rapid fire is what we call Speed Mode 9. The slowest speed is Speed

Mode 50, and fastest is Speed Mode 1.

To adjust the speed of all modes on the chip, activate the chip (r+a) then go into the User

Programming Mode (by entering the “User Programming” mode from the list above as you would

enter any other mode by holding rand tapping 2however many times for the mode) and

you will notice when you release rthe Player 3 LED will stay on after entering the mode

instead of flashing back the mode number to you. You are now ready to adjust the speed. You

will start in whatever speed you were currently in, so if you haven’t done this before it will be

Speed Mode 9.

To increase the speed, press and release land Player 3 LED will flash once to indicate an

increase. You will now go to Speed Mode 8 (if you were in 9 to start with). You can test this

speed on the fly by holding r. To continue increasing the speed just press lagain and

again until you get to where you want. If you go too far, or want to slow down the speed hold

Xand press l.

Once you are happy with your speed tap 2with buttons pressed and it will flash back to you

the Speed Mode you are in. This speed is then hard saved into the chip and will be remembered

even when the battery is removed –you can now select any mode that uses Rapid Fire and see

the speed has totally changed.

NOTE: If you get a bit lost as to what speed your chip is now in you can reset it to Speed Mode 9

by going into User Programming Mode and holding Cfor 3 second. The Player 3 LED will flash a

few times then go off. The speed is now reset and you can go to any mode you like as before.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Videospiel-Controller Handbücher

Sony

Sony PS3 CECH-ZCM1E Bedienungsanleitung

Sony

Sony PS4 DualShock 4 CUH-ZCT1E Bedienungsanleitung

Sony

Sony RM-BR300 - Remote Control Unit Bedienungsanleitung

Sony

Sony Move.Me Bedienungsanleitung

Sony

Sony PlayStation DualSense Bedienungsanleitung

Sony

Sony CECH-ZCS1U Bedienungsanleitung

Sony

Sony CECH-ZCS1U Bedienungsanleitung

Sony

Sony CUH-ZCT1E DUALSHOCK 4 Bedienungsanleitung

Sony

Sony DUALSHOCK 4 Bedienungsanleitung

Sony

Sony PS3 CECH-ZCM1U Bedienungsanleitung

Sony

Sony Dualshock 4 Bedienungsanleitung

Sony

Sony DualSense Edge Bedienungsanleitung

Sony

Sony PlaayStation SCPH-110 Bedienungsanleitung

Sony

Sony DUALSHOCK 4 Bedienungsanleitung

Sony

Sony PS 4 DUALSHOCK CUH-ZCT2U Bedienungsanleitung

Sony

Sony DUALSHOCK II SCPH-10010 U / 97026 Bedienungsanleitung

Sony

Sony PlayStation DualSense Edge CFI-ZCP1 Bedienungsanleitung

Sony

Sony PS4 FORTNITE PRO Bedienungsanleitung

Sony

Sony PlayStation DualSense Bedienungsanleitung

Sony

Sony PSVITA PCH-2016 Installations- und Betriebsanleitung

Sony

Sony PS3 INFIMOD Bedienungsanleitung

Sony

Sony CECH-ZCM1U Bedienungsanleitung

Sony

Sony CHU-ZCT1E Bedienungsanleitung

Sony

Sony PS4 DUALSHOCK CUH-ZCT1E Bedienungsanleitung

Beliebte Videospiel-Controller Handbücher anderer Marken

Wasp

Wasp SL-6610 Bedienungsanleitung

JKG

JKG JKG2022A Bedienungsanleitung

Marvo

Marvo MG08 Bedienungsanleitung

Belkin

Belkin F8GBPC001 Bedienungsanleitung

GameSir

GameSir Z2 Bedienungsanleitung

Laser

Laser PCO-AGAMEC-BK Bedienungsanleitung

Cortex

Cortex VEXnet Bedienungsanleitung

Gioteck

Gioteck HF-1 Bedienungsanleitung

Nacon

Nacon DAIJA ARCADE STICK Bedienungsanleitung

Thrustmaster

Thrustmaster dual trigger Bedienungsanleitung

SHAKS

SHAKS S1+ Bedienungsanleitung

YCCTEAM

YCCTEAM Joy Con Bedienungsanleitung

Hyperkin

Hyperkin Smartboy Bedienungsanleitung

Nerf

Nerf DuraGrip Bedienungsanleitung

MoveMaster

MoveMaster MoveMaster Bedienungsanleitung

WinWing

WinWing Super Libra J1 Bedienungsanleitung

ECCI

ECCI Trackstar 6000 Series Bedienungsanleitung

Logitech

Logitech 963291-0403 - Attack 3 Joystick Bedienungsanleitung