SOULLIFE SL-01 Installationsanleitung
Q u i c k M a n u a l f o r A n d r o i d a n d i O S
SL-01 WIFI IP CAMERA
Packing list
After open packing list box, please check product body and
accessories as blow:
Camera x 1
Waterproof cap x 1
01
Screw x 4
Wallplug X 4
Adapter X 1
※ Please read this user's guide carefully before
using the product and keep it properly
Interface
3dBi Antenna
IR Sensor
Microphone
4pcs white LEDs
4pcs array LEDs
Lens
TF card slot & reset button
Speaker
Designed for
indoor/outdoor
DC power 12V
Rj45 ethernet port
Before use, please pay attention to the interface and button
of camera.
02
Before installed the camera, pls make sure your phone is in
2.4GHz WIFI network, 5GHz network is not supported
Operation
Tips 1: Scan QR code.
1.Download APP
Tips 2: Search “icsee” in the App Store or Search “icsee pro” in
the Google Play and download
03
Install TF card first, then connect the camera to the power
outlet.(Pls make sure you insert the TF card then power on,
otherwise maybe the TF card cannot be identified by the system)
2.Power on
01.open the app “iCSee”, choose the “login” (picture 1)
1.Wi r eless netwo r k configura t ion:
3.Camera configuration
02.Click “+” button to add the device (picture 2)
Picture 1 Picture 2
Pls directly log in if you already have the account No.of Icsee
Pls register if you don’t have the account No. Then Logo in
TP-LINK_77BA
..........
TP-LINK_77BA
..........
04
03.Click “Add WIFI camera” (picture 3)
04.Pls make sure your phone is in 2.4GHz WIFI network,
and it must be in the same WIFI both for your phone
and camera. 5GHz network is not supported (picture 4)
Picture 3 Picture 4
05
TP-LINK_77BA
. . . . . . . . . .
05.Pls input WIFI router password, then confirm (picture 5)
06.The phone is connecting the device in the same
WIFI, pls wait. (picture 6)
Picture 5 Picture 6
06
Picture 7 Picture 8
08.After confirm then you can select or create a new name
for the device (picture 8)
07
07.After heard a camera voice “connect successfully”,
Will enter to “set pwd”, then confirm (picture 7)
If you cannot install the camera, pls push the ”reset”
button, Restore factory settings, then repeat again.
You have to restored to the factory settings if more than 5
minutes you couldn’t connect your phone with camare.
09.After click “save” will enter to video preview (picture 9)
Picture 9
08
2.Wi r ed network co n figuratio n :
Enter into “Device Searching” interface, click
“xmjp_bullet_****” (picture 11);The camera will
be shown online, which indicates that the wired
network configuration of camera is complete.
Picture 10 Picture 11
After login successfully, click “+”in the upper right corner,
and select the third way “Add device in the same WLAN”
(picture 10);
Click to enter the view interface, and you can do related
operations and settings.
09
Inhaltsverzeichnis
Andere SOULLIFE Sicherheitskamera Handbücher
