Using the wires provided, complete the audio, and power connections in your
vehicle as shown in the diagram below.
Be sure tolocate the transmitter in a location and position within direct line-of-sight
of the location in the vehicle you plan to have passengers wearing headphones.
Thewireless headphones use (2) AAA batteries (not included), which are located
in one of the earphone housings.
To replace the batteries, follow the diagrams below. To conserve batterylife, please
be sure to turn off the headphones whenever they are not in use, even though they
will turn off after a short period of interrupted IR reception. If you expect the
headphones to be unused for several days, remove and store the batteries.
CONTENTS
SHP-IR • SHP User’s Manual - Contents
SHP-IR • SHP User’s Manual - page 5
SHP-IR • SHP User’s Manual - page 2
General precautions
Safety precautions
SHP-IR and SHP Headphone Controls and Features
SHP-IR • SHP User’s Manual - page 3
Troubleshooting
SHP-IR • SHP User’s Manual - page 8
SHP-IR • SHP User’s Manual - page 7
SHP-IR Transmitter Features
SHP-IR • SHP User’s Manual - page 4
SHP-IR • SHP User’s Manual - page 6
U S E R ’ S M A N U A L
Specifications
Please read this manual completely
and carefully prior to attempting to
install your new Sound Storm mobile
audio/video equipment. Installed
correctly, your Sound Storm
equipment will provide youwith years
of enjoyable and safe usage.
Installation of this equipment in any
portion of a vehicle which impairs or
distracts the driver is improper and
dangerous. Sound Storm assumes no
liability whatsoever for failure tofollow
the proper installation of this product.
Please keep this manual in a safe place
for future reference.
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
may be present which may result in
electric shock.Refer any repairs to a
qualified service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible.
Installation precautions
Do not install components in areas
which are susceptible to rain, moisture,
direct sunlight,extreme heat or cold,
excessive dust, dirt or humidity.
Use only the installation parts and
hardware provided with the unit to
ensure proper installation. Usingother
parts can cause malfunction and
possible damage to your Sound Storm
headphone system.
Use only a power source with 12Volts
DC (negative ground).
Before final installation, temporarily
connect the wiring according to the
diagram near the end of this manual,
check it to ensure that it has been
connected properly, and test the unit
to make sure it is working correctly.
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
What is included?
TheSHP-IR wireless infrared audio
system includes:
• Wireless audio transmitter
• (2) wireless headphones
TheSHP is an additional set of
wireless headphones for use with
the SHP-IR system or Sound Storm
monitors with wireless infrared audio
transmission capability.
2General precautions
2Safety precautions
2Installation precautions
2What is included?
3Headphonecontrols and features
4SHP-IR features
5Systemwiring:
SHP-IR transmitter
6Headphonebattery replacement
7Using SHP with a monitor with
built-in IR audio transmitter
8Troubleshooting
8Specifications
Congratulations on your purchase
of a Sound Storm Laboratories
wireless infrared headphone
system.
It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of listening
pleasure.
Thank you for making Sound Storm
Laboratories your choice in car audio
and video entertainment!
page
SHP-IR
Wireless Infrared Headphone System
(Two Headphones and Transmitter)
SHP
Wireless Headphones
(for use with Sound Storm SHP-IR and
Sound Storm Monitors with Infrared
Audio Transmission)
All specifications subject to change without notice.
Transmission system
Carrier frequency
Modulation
Mode
S/N ratio
Channel separation
Distortion
Frequency response
Power source, headphones
Current consumption, headphones
MODEL
SYMPTOM CAUSE REMEDY
SHP-IR Wireless Headphones with IR Audio Transmitter
Lift battery door release latch.
Lift and remove battery door.
Insert two AAA type batteries (not
included). Be sure to note proper
polarity when installing the batteries.
