Soundcore Infini Bedienungsanleitung

User Manual

Soundcore Infini

Soundbar

A3371

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital d

evice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pr

otection against harmful interference in a residential installation. This equipment generates use

s and can radiate radio frequency energy and, if not installed and used in accordance with the i

nstructions, may cause harmful interference to radio communications. However, there is no gua

rantee that interference will not occur in a particular installation. If this equipment does cause h

armful interference to radio or television reception, which can be determined by turning the equi

pment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is con

nected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled enviro

nment. This equipment should be installed and operated with minimum distance 20cm between

the radiator & your body.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two co

nditions: (1) This device may not cause harmful interference, and (2) this device must accept an

y interference received, including interference that may cause undesired operation.

IC Caution

“This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled

environment.

This equipment should be installed and operated with a minimum distance of 20 centimeters

between the radiator and your body.”

" ce matériel est conforme aux limites d'exposition aux rayonnements rf de ic énoncés dans un

autre environnement.

ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et

votre corps. "

- English:

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause interference,

and (2) This device must accept any interference, including interference that may cause

undesired operation of the device.

- French:

Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le

brouillageest susceptible d'encompromettre le fonctionnement.

Safety Instructions

① Avoid dropping.

② Do not disassemble.

③ Do not submerge in water.

④ Avoid extreme temperatures.

⑤ Do not use the device outdoors during thunderstorms.

⑥ Use original or certified cables.

⑦ Do not use any corrosive cleaner / oil to clean.

8. The product should not be exposed to dripping or splashing water.

What’s Included

① Soundbar

② Power cord

③ Remote control

④ AAA Batteries

⑤ 3.5mm to RCA audio cable

⑥ Optical cable

⑦ Wall mounting brackets

8. Wall mounting bolts

9. User manual

10. Wall mounting template

At a Glance

① Status indicator

Status Status indicator light

Standby Solid red

Optical Solid green (stays on for 10 seconds)

Coaxial Solid orange (stays on for 10 seconds)

Aux in Solid cyan (stays on for 10 seconds)

Bluetooth pairing mode Flashing blue

Bluetooth device

connected Solid blue (stays on for 10 seconds)

Volume up and down Flashing white

Maximum volume Solid white (stays on for 10 seconds)

Minimum volume Solid white (stays on for 10 seconds)

Music equalizer mode Flashing white (once)

Movie equalizer mode Flashing white (2 times)

Dialogue mode Solid white (stays on for 5 seconds)

Mute Solid yellow

② Power button

③ Volume-down control

④ Volume-up control

⑤ Source input button

⑥ Wall mounting screw holes

⑦ Power input

⑧ Service port

9. Aux input

10. Optical input

11. Coaxial

Note: Press source input button and hold for 3 seconds to activate Bluetooth pairing mode.

Placement

●Table Placement

1. Place the soundbar on a solid surface.

●Wall mount Installation

Step 1: Insert two wall mounting screws into the wall mounting screw holes, then fasten the

screws.

Step 2: Place the wall mounting template against the wall, under your TV. Mark the 4bracket

holes on the wall with a pencil.

Step 3: Fix the two mounting brackets on the wall according to the center points. Use bolts

(not included) to secure the brackets.

Step 4: Hang the soundbar on the brackets.

Remote Control

1. Battery installation

2. Remote control buttons

Button Button functions

① Power button Press to switch on / off the soundbar.

② Volume-up control To increase the volume.

③ Previous Return to previous track.

④ Play / Pause To pause / resume playback.

⑤ Bluetooth button To activate Bluetooth mode.

1. Press to activate Bluetooth mode.

2. Press and hold for 3 seconds to reconnect.

⑥ Dialogue mode

button

To activate the dialogue mode.

⑦ Music equalizer

button

To activate the music equalizer mode.

⑧ Mute button To temporarily turn off the sound. Press the button again to turn

the sound back on.

9. Next Move to next track.

10. Volume-down

control To decrease the volume.

11. Source input

button To change source input. Press this button for 3 seconds to

activate Bluetooth pairing mode.

12. Movie equalizer

button To activate the movie equalizer mode.

Note: The status indicator light will stay on for approximately 10 seconds when thesoundbar

is in Bluetooth mode / Aux in mode / Optical mode / Coaxial mode.

Using Your Soundbar

1. Turn On / Off

Note: The soundbar will automatically switch to standby mode when no audio input is

received for over 30 minutes. The soundbar will wake up from standby mode when any

button is pressed or source input is received.

a. Connect to your TV

1. You can use optical cable, coaxial cable or 3.5mm to RCA audio cable to connect to

the respective output port of your TV.

2. Press the source input button on the soundbar or remote control to activate the

corresponding mode.The status indicator will be solid green in optical mode,orange

in coaxial mode and cyan in Aux mode.

Note: The status indicator light will stay on for 10seconds.

Note: Not all TVs have the audio outputs shown as above, please check your TV's

specifications before setup.

Note: Try set the TV output to PCM if there is no audio sound when using either of

the optical or coaxial inputs.

Note: Coaxial cable is not included.

b. Connect to other devices

1. You can use optical cable / coaxial cable or 3.5mm to RCA audio cable, or 3.5mm to

3.5mm cable (not included) to connect to the respective output port of otherdevices

(such as Blu-ray player, game console, tablet, MP3 Player / laptop etc).

Dieses Handbuch passt für folgende Modelle

Andere Soundcore Sprecher Handbücher

Soundcore

Soundcore Icon+ A3123 Bedienungsanleitung

Soundcore

Soundcore Motion X600 Bedienungsanleitung

Soundcore

Soundcore Flare Mini 3 Bedienungsanleitung

Soundcore

Soundcore Flare S+ Bedienungsanleitung

Soundcore

Soundcore Icon Mini Bedienungsanleitung

Soundcore

Soundcore Zero Bedienungsanleitung

Soundcore

Soundcore Soundcore Motion Boom Bedienungsanleitung

Soundcore

Soundcore A3391Z12 Bedienungsanleitung

Soundcore

Soundcore Flare 2 Bedienungsanleitung

Soundcore

Soundcore Flare Mini Bedienungsanleitung

Soundcore

Soundcore A3399 Bedienungsanleitung

Soundcore

Soundcore A3107 Bedienungsanleitung

Soundcore

Soundcore Icon Bedienungsanleitung

Soundcore

Soundcore Flare Mini Bedienungsanleitung

Soundcore

Soundcore Infini Mini A3370 Bedienungsanleitung

Soundcore

Soundcore Trance Bedienungsanleitung

Soundcore

Soundcore Trance Bedienungsanleitung

Soundcore

Soundcore Rave Party 2 Bedienungsanleitung

Soundcore

Soundcore Motion+ Bedienungsanleitung

Soundcore

Soundcore Flare Mini Bedienungsanleitung

Soundcore

Soundcore Flare Bedienungsanleitung

Soundcore

Soundcore Motion+ Bedienungsanleitung

Soundcore

Soundcore Flare 2 Bedienungsanleitung

Soundcore

Soundcore Zero Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung