SoundCraft 328xd Bedienungsanleitung

RIGHT

STE-2STE-1

SELECT

MUTE

SOLO

MIX

dBFS

0dBFS = 18dBu

STEREO INPUTS

GROUP LINK

CHANNEL /

XDX D

EXIT

PARAMETER

FUNCTION

OUT

THRU

MIDI

IN OUT IN

OUT

S/PDIF

OUT IN

AES/EBU

WORD

CLOCK CLOCK

WORD/SUPER

MOTU 2408 MKII

328

Soundcraft 328XD and MOTU 2408 mkII

328XD AND

328XD AND328XD AND

328XD AND

MOTU 2408 MKII

MOTU 2408 MKIIMOTU 2408 MKII

MOTU 2408 MKII

Connecting the system 2

328XD Configuration 3

MOTU 2408 mkII Configuration 5

Soundcraft 328XD and MOTU 2408 mkII

CONNECTING THE SYSTEM

Audio Connections – ADAT Operation

Connect audio connections as shown in the diagram below. ADAT Optical cables must be connected

from the ADAT Out ports of the Mark of the Unicorn 2408 mkII hardware to the ADAT In ports of the

328XD and vice versa.

The ADAT connections allow digital transfer of either direct output for input channels 1-16 to the Mark

of the Unicorn 2408 mkII hardware, or the 328XD’s 8 Group outputs.

The S/PDIF connections allow digital transfer of stereo signals, such as the mix output of the 328XD

into the 2408 mkII for recording to hard disk.

Soundcraft 328XD and MOTU 2408 mkII

328XD CONFIGURATION

Wordclock

To configure the 328XD as the wordclock master, enter the 328XD Menu pages by pressing the <MENU>

button on the right hand side of the LCD display. Using the PARAM encoder beneath the display, scroll up or

down until the ‘Clock Source Sel’ menu is highlighted, and press <ENTER>. Here, either the internal

44.1kHz clock or the internal 48kHz clock must be selected, depending on the sampling rate at which work

is to be done. Press <ENTER> to set the sample rate and <MENU> to return to the menu pages.

Tape Ports

To ensure that the 328XD Tape Ports are set to ADAT to work with the MOTU 2408 mkII, enter the

328XD Menu pages by pressing the <MENU> button on the right hand side of the LCD display. Using the

PARAM encoder beneath the display, scroll up or down until the ‘Tape Port Select’ menu is highlighted.

Press <ENTER> and keep pressing the Up cursor arrow until the ‘<Tape Ch17-24 >’ menu page is

displayed. Using the encoder set the Bank Source to ADAT.

Press the Down cursor arrow once, to set the wordlength. The MOTU 2408 mkII is capable of 24-bit

recording, and so for optimum results, 24-bit wordlength can be selected here. If your audio sequencer

software does not allow 24-bit recording, 20-bit or 16-bit should be selected. The sequencer manuals

should be consulted for further information.

Set the desired wordlength on the 328XD with the PARAM encoder.

Press the <MENU> button to return to the main menu.

Soundcraft 328XD and MOTU 2408 mkII

S/PDIF Input

The 328XD S/PDIF input can be routed to any one of the following inputs:

Stereo Input 1, Stereo Input 2, FX - 1, FX - 2, 2 Track Tape Return,

provided that the AES/EBU input or oscillator has not already been assigned to that input.

Commonly the 2408 S/PDIF output would be routed to Stereo Input 2, or the 2 Track Tape Return input.

NOTE:

Assigning a digital source to an input will override any analogue signal present on that input.

Press <MENU> to enter the menu pages, scroll through the pages until the ‘SPDIF I/P Setup’ is

highlighted and press <ENTER>. Using the PARAM encoder, select the destination for the S/PDIF input,

and press <ENTER> to confirm the setting. Press <MENU> to return to the menu pages.

NOTE:

If the S/PDIF input is not required, NOWHERE should be selected in the menu.

Soundcraft 328XD and MOTU 2408 mkII

MOTU 2408 MKII CONFIGURATION

Wordclock

The Mark of the Unicorn 2408 mkII must now be set up to receive the wordclock transmitted by the 328XD.

Open the PCI-324 Console window, by double clicking the correct icon and select "2408 mkII :Bank A

Optical" from the ‘Clock Source’ options.

NOTE:

If TDIF isused for audio data, then the Mark of the Unicorn 2408 mkII must operate as a

master to send wordclock to the Digital 328. A Wordclock cable must be fitted from the

WORDCLOCK OUT of the MOTU2408 mkII to the WORDCLOCK IN of the Digital 328. The

328XD must then be set to client fromBNC wordclock input in the"Clock Source Select

Menu. All 16 audio channels may be exchanged using two TDIF cables connecting the

328XD and the MOTU 2408 mkII.

Soundcraft 328XD and MOTU 2408 mkII

Audio Data

The Mark of the Unicorn 2408 mkII must now be set up to transmit and receive audio data to and from

the 328XD.

Open the PCI-324 control panel and select ADAT or TDIF, depending on which is being used for each of

the required ports.

Remember you can link two 328XDs together, and the MOTU 2408 mkII system can be expanded to 3 x

2408 mkII's. With these options you can actually run 32 digital channels and 32 analogue channels from

your chosen sequencer.

Please refer to the Mark of the Unicorn 2408 mkII documentation for other system settings, when working

with sequencer packages. The synchronisation options described within this document are normally

available from within an audio system settings page.

SOUNDCRAFT

HARMAN INTERNATIONAL INDUSTRIES LTD

CRANBORNE HOUSE

CRANBORNE ROAD

POTTERS BAR

HERTS EN6 3JN UK

TEL: +44 (0) 1707 665000

FAX: +44 (0) 1707 660742

EMAIL: info@soundcraft.com

SOUNDCRAFT USA

1449 DONELSON PIKE

NASHVILLE TN 37217 USA

TEL: 1-615-360-0471

FAX: 1-615-360-0273

EMAIL: soundcraft-usa@harman.com

www.soundcraft.com

Andere Handbücher für 328xd

Inhaltsverzeichnis

Andere SoundCraft Musikmixer Handbücher

SoundCraft

SoundCraft COMPACT 4 Bedienungsanleitung

SoundCraft

SoundCraft Signature 16 Bedienungsanleitung

SoundCraft

SoundCraft MH4 Montageanleitung

SoundCraft

SoundCraft LM1 Bedienungsanleitung

SoundCraft

SoundCraft Spirit Folio 4 Bedienungsanleitung

SoundCraft

SoundCraft EFX Bedienungsanleitung

SoundCraft

SoundCraft 328xd Bedienungsanleitung

SoundCraft

SoundCraft K2 Bedienungsanleitung

SoundCraft

SoundCraft Spirit Folio FX8 Bedienungsanleitung

SoundCraft

SoundCraft SPIRIT FOLIO Bedienungsanleitung

SoundCraft

SoundCraft Series 200 Bedienungsanleitung

SoundCraft

SoundCraft Vi Series Bedienungsanleitung

SoundCraft

SoundCraft GB8 Bedienungsanleitung

SoundCraft

SoundCraft Spirit Live 3-2 Bedienungsanleitung

SoundCraft

SoundCraft Vienna II Bedienungsanleitung

SoundCraft

SoundCraft Spirit Folio Rac Pac Bedienungsanleitung

SoundCraft

SoundCraft SPIRIT Monitor2 Bedienungsanleitung

SoundCraft

SoundCraft SM 16 Bedienungsanleitung

SoundCraft

SoundCraft GB4 Bedienungsanleitung

SoundCraft

SoundCraft EFX12 Bedienungsanleitung

SoundCraft

SoundCraft LX7II Bedienungsanleitung

SoundCraft

SoundCraft Si Series Bedienungsanleitung

SoundCraft

SoundCraft Si Performer 1 Bedienungsanleitung

SoundCraft

SoundCraft SPIRIT LIVE 42 Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Roland

Roland M-160 Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

Roland

Roland SoundCanvas SC-8820 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung

Roland

Roland M-16E Bedienungsanleitung