SoundCraft Spirit Digital 328 v2 Bedienungsanleitung

Setup Guide

Setup GuideSetup Guide

Setup Guide

V 2.0

Revised: 04-12-00

MOTU 2408 mkII Setup Guide

Contents:

1 Connecting The System 2

2 Digital 328 Setup 3

3 MOTU 2408 mkII Setup 4

Digital 328 v2 and

Digital 328 v2 andDigital 328 v2 and

Digital 328 v2 and

MOTU 2408

MOTU 2408MOTU 2408

MOTU 2408 mkII Setup

mkII SetupmkII Setup

mkII Setup

Spirit Digital 328 v2

Connect audio connections as shown in the diagram below. Toslink Optical cables must be

connected from the ADAT Out ports of the Mark of the Unicorn 2408 mkII hardware to the ADAT

In ports of the Digital 328 and vice versa.

The ADAT connections allow digital transfer of either direct output for input channels 1-16 to the

Mark of the Unicorn 2408 mkII hardware, or the Digital 328’s 8 Group outputs.

The S/PDIF connections allow digital transfer of stereo signals, such as the mix output of the 328

into the 2408 mkII for recording to hard disk.

Connecting The System

Connecting The SystemConnecting The System

Connecting The System

328 ADAT Out 1 Î2408 mkII ADAT In 1

Audio Connections (ADAT Operation)

Audio Connections (ADAT Operation)Audio Connections (ADAT Operation)

Audio Connections (ADAT Operation)

328 ADAT Out 2 Î2408 mkII ADAT In 2

2408 mkII ADAT Out 1 Î328 ADAT In 1

2408 mkII ADAT Out 2 Î328 ADAT In 2

328 SPDIF Out Î2408 mkII SPDIF In

2408 mkII SPDIF Out Î328 SPDIF In

MOTU 2408 mkII Setup Guide

To configure the Digital 328 as the wordclock master, enter the 328 Menu pages by pressing the

<MENU> button on the right hand side of the LCD display. Using the encoder beneath the

display, scroll up or down until the ‘Clock Source Sel’ menu is highlighted, and press <ENTER>.

Here, either the internal 44.1kHz clock or the internal 48kHz clock must be selected, depending

on the sampling rate at which work is to be done. Press <ENTER> to set the sample rate and

<MENU> to return to the menu pages.

To ensure that the Digital 328 Tape Ports are set to ADAT to work with the MOTU 2408 mkII,

enter the 328 Menu pages by pressing the <MENU> button on the right hand side of the LCD

display. Using the encoder beneath the display, scroll up or down until the ‘Tape Port Select’

menu is highlighted. Press <ENTER> and keep pressing the Up cursor arrow until the ‘<Tape

Ch17-24 >’ menu page is displayed. Using the encoder set the Bank Source to ADAT. Press the

Down cursor arrow once, to set the wordlength. The MOTU 2408 mkII is capable of 24-bit

recording, and so for optimum results, 24-bit wordlength can be selected here. If your audio

sequencer software does not allow 24-bit recording, 20-bit or 16-bit should be selected. The

sequencer manuals should be consulted for further information. The wordlength is set on the

328 with the encoder. Press <ENTER> to set the wordlength and <MENU> to return to the

menu pages.

Digital 328 Setup

Digital 328 SetupDigital 328 Setup

Digital 328 Setup 2

Wordclock

WordclockWordclock

Wordclock

Internal:44.1kHz

Internal:48.0kHz

Bank Source:ADAT

Wordlength: 24

Bank Source:ADAT

Wordlength: 24

Spirit Digital 328 v2

The Mark of the Unicorn 2408 mkII must now be set up to receive the wordclock transmitted by

the 328. Open the PCI-324 Console windowl, by double clicking the correct icon on your hard

drive. and select "2408 mkII :Bank A Optical" from the ‘Clock Source’ options.

MOTU 2408

MOTU 2408MOTU 2408

MOTU 2408 mkII Setup

mkII SetupmkII Setup

mkII Setup

Wordclock

WordclockWordclock

Wordclock

If the TDIF is used for audio data, then the Mark of the Unicorn 2408

mkII must operate as a master to send wordclock to the Digital 328. A

Wordclock cable must be fitted from the WORDCLOCK OUT of the

MOTU2408 mkII to the WORDCLOCK IN of the Digital 328. The Digital

328 must then be set to slave from BNC wordclock input in the "Clock

Source Select Menu. All 16 audio channels may be exchanged using

two TDIF cables connecting the Digital 328 and the MOTU 2408 mkII.

NOTE

MOTU 2408 mkII Setup Guide

The Mark of the Unicorn 2408 mkII must now be set up to transmit and receive audio data to

and from the Digital 328.

Open the PCI-324 control panel and select ADAT or TDIF, depending on which is being used for

each of the required ports.

Remember you can link Digital 328's together, and the MOTU 2408 mkII system can be

expanded to 3 x 2408 mkII's. With these options you can actually run 32 Digital Channels and

32 Analogue Channels from your chosen sequencer.

Please refer to the Mark of the Unicorn 2408 mkII Documentation for other system settings,

when working with sequencer packages. The synchronisation options described within this

document are normally available from within an Audio System settings page.

Spirit by Soundcraft

Harman International Industries Ltd., Cranborne House,

Cranborne Road, Potters Bar, Herts EN6 3JN, England.

Tel: +44 (0)1707 665000 Fax: +44 (0)1707 665461

web: http://www.spiritbysoundcraft.com

e-mail: spiritsupport@soundcraft.com

spiritdig@harman.com (US)

Audio Data

Audio DataAudio Data

Audio Data

Andere Handbücher für Spirit Digital 328 v2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SoundCraft Musikmixer Handbücher

SoundCraft

SoundCraft 1603 Bedienungsanleitung

SoundCraft

SoundCraft 1601 Bedienungsanleitung

SoundCraft

SoundCraft RM1ds Bedienungsanleitung

SoundCraft

SoundCraft Spirit Digital 328 Montage- und Bedienungsanleitung

SoundCraft

SoundCraft Spirit Folio Lite Bedienungsanleitung

SoundCraft

SoundCraft SIGNATURE MTK Bedienungsanleitung

SoundCraft

SoundCraft SPIRIT FOLIO Bedienungsanleitung

SoundCraft

SoundCraft SM 16 Bedienungsanleitung

SoundCraft

SoundCraft Series 200 Bedienungsanleitung

SoundCraft

SoundCraft Ui24R Bedienungsanleitung

SoundCraft

SoundCraft D-MIX 1000 Bedienungsanleitung

SoundCraft

SoundCraft Delta SR Bedienungsanleitung

SoundCraft

SoundCraft UI12 Bedienungsanleitung

SoundCraft

SoundCraft 328xd Bedienungsanleitung

SoundCraft

SoundCraft Spirit Folio FX8 Bedienungsanleitung

SoundCraft

SoundCraft Series Two Bedienungsanleitung

SoundCraft

SoundCraft Vi4 Bedienungsanleitung

SoundCraft

SoundCraft Si Series Bedienungsanleitung

SoundCraft

SoundCraft POWERSTATION 1200 Bedienungsanleitung

SoundCraft

SoundCraft MPMI Bedienungsanleitung

SoundCraft

SoundCraft Spirit Folio Rac Pac Bedienungsanleitung

SoundCraft

SoundCraft Vienna Bedienungsanleitung

SoundCraft

SoundCraft SPIRIT LIVE 4 2 Bedienungsanleitung

SoundCraft

SoundCraft Spirit LX7 Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Roland

Roland M-160 Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

Roland

Roland SoundCanvas SC-8820 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung

Roland

Roland M-16E Bedienungsanleitung