SoundCraft Spirit Digital 328 v2 Bedienungsanleitung

Setup Guide

Setup GuideSetup Guide

Setup Guide

1212 I/O Card

1212 I/O Card1212 I/O Card

1212 I/O Card

V 2.0

Revised: 04-12-00

Korg 1212 Setup Guide

Contents

1 Connecting The System 2

2 Digital 328 Setup 3

3 Korg 1212 Setup 5

4 Using The 1212 With The 328 8

5 Additional Information 9

Digital 328 v2 and

Digital 328 v2 andDigital 328 v2 and

Digital 328 v2 and

Korg 1212 Setup Guide

Korg 1212 Setup GuideKorg 1212 Setup Guide

Korg 1212 Setup Guide

Spirit Digital 328 v2

Audio connections should be made as shown in the diagram below. Toslink Optical cables must

be connected between the ADAT Out ports of the 1212 card to the ADAT In ports of the 328 and

vice versa. Coaxial digital S/PDIF cables must also be connected from the 1212 S/PDIF output to

the 328 S/PDIF input and vice versa.

In this way, the ADAT connections allow digital transfer of either direct outputs for input channels

1-8 to the 1212 card, or the Digital 328’s 8 Group outputs. The S/PDIF output from the console

can be assigned to either the Mix output or 1 of 3 stereo auxiliary outputs (Aux 1/2, Aux 3/4 or

FX 1/2) The 328 S/PDIF Input can be configured to be a digital Stereo Input or as a digital 2

Track Return.

Besides the audio connections, the 328 Wordclock Output should be connected to the 1212

Wordclock input, to enable the 1212 to synchronize to the 328 wordclock. In this configuration,

the 328 is wordclock master, and the 1212 is the wordclock slave.

Connecting The System

Connecting The SystemConnecting The System

Connecting The System

328 ADAT Out 1 Î1212 ADAT In

1212 ADAT Out Î328 ADAT In 1

1212 S/PDIF Out Î328 S/PDIF In

328 S/PDIF Out Î1212 S/PDIF In

328 Wordclock out Î1212 Wordclock In

Audio Connections

Audio ConnectionsAudio Connections

Audio Connections

Other Connections

Other ConnectionsOther Connections

Other Connections

Korg 1212 Setup Guide

To configure the Digital 328 as the wordclock master, enter the 328 Menu page by pressing the

<MENU> button to the right hand side of the LCD display. Using the rotary encoder beneath

the display, scroll up or down until the ‘Clock Source Sel’ menu is highlighted, and press

<ENTER>. Here, either ‘Internal 44.1kHz’ or ‘Internal 48kHz’ clock must be selected for the 328

to function as wordclock master. Set this to the samplerate you wish to work at. Press

<ENTER> to confirm the samplerate setting and <MENU> to return to the menu pages.

To ensure that the Digital 328 Tape Ports are set to ADAT to work with the 1212, enter the 328

Menu pages by pressing the <MENU> button to the right hand side of the LCD display. Using

the rotary encoder beneath the display, scroll up or down until the ‘Tape Port Select’ menu is

highlighted and press <ENTER>.

Now repeatedly press the Up cursor arrow until the ‘<Tape Ch17-24 >’ menu page is displayed.

Using the rotary encoder, set the ‘Bank Source’ to ‘ADAT’. Press the Down cursor arrow once, to

set the wordlength:

The 1212 is capable of 20-bit recording, and so for optimum results, 20-bit wordlength can be

selected here. If your audio sequencer software only allows 16-bit recording, 16-bit should be

selected. The sequencer manuals should be consulted for further information.

Set the desired wordlength on the 328 with the rotary encoder, and press <ENTER> confirm

the setting. Press the <MENU> button to return to the main menu:

rc.

Internal:44.1kHz

rc.

Internal:48.0kHz

Bank Source:ADAT

Wordlen

th: 24

Digital 328 Setup

Digital 328 SetupDigital 328 Setup

Digital 328 Setup

Wordclock

WordclockWordclock

Wordclock

Tape Ports

Tape PortsTape Ports

Tape Ports

Spirit Digital 328 v2

The 328 S/PDIF input can be routed to any one of the following inputs:

Stereo Input 1, Stereo Input 2, FX Return 1, FX Return 2, 2 Track Tape Return,

providing that the AES/EBU input has not already been assigned to that input.

Commonly the 1212 S/PDIF output would be routed to Stereo Input 2, or the 2 Track Tape

Return input.

Press <MENU> to enter the menu pages, scroll through the pages until the ‘SPDIF I/P Setup’ is

highlighted and press <ENTER>. Using the rotary encoder, select the destination for the

S/PDIF input, and press <ENTER> to confirm the setting. Press <MENU> to return to the

menu pages.

< SPDIF Input >

oute To: STE-1 < SPDIF Input >

oute To: FX-1

< SPDIF Input >

oute To: 2TRK < SPDIF Input >

oute To:NOWHERE

S/PDIF Input

S/PDIF InputS/PDIF Input

S/PDIF Input

Assigning a digital source to an input will override any analogue signal

present on that input.

NOTE

If the S/PDIF input is not required, NOWHERE should be selected in the

menu.

NOTE

Korg 1212 Setup Guide

The 1212 must be set up to receive the wordclock transmitted by the 328 (via the BNC

connection).

Open the Korg 1212 Utility program, accessed via the Korg ‘1212 IO’ program group on the

taskbar:

Wordclock

WordclockWordclock

Wordclock

1212 Setup

1212 Setup1212 Setup

1212 Setup

Spirit Digital 328 v2

Click on the ‘Clock Source’ pull-down menu in the ‘Word Clock & Sample Rate’ section, and select

‘S/PDIF-ClockIn’. This sets the 1212 to receive wordclock from its BNC input:

Now the 1212 must be configured to playback at the same samplerate as the 328. Click on the

‘Sample Rate’ pull-down menu in the ‘Word Clock & Sample Rate’ section. Here the samplerate

which the 1212 plays back can be set between 44.1kHz and 48kHz:

Sample Rate

Sample RateSample Rate

Sample Rate

Korg 1212 Setup Guide

This should be set to the same samplerate as the 328 was set to in the ‘Wordclock’ section in

chapter 2 of this guide. If the 328 and 1212 are (wrongly) set to different samplerate settings,

audio from the 1212 will playback at the incorrect speed.

Now click on the ‘File’ drop-down menu, and click on ‘Save as Default…’:

Answer ‘OK’ to the window that follows, to confirm that you wish to save the current settings as

the default settings.

Now, every time that Windows is loaded the Korg 1212 will be automatically set to receive

wordclock from its BNC input, and to playback at the desired samplerate.

Saving Settings

Saving SettingsSaving Settings

Saving Settings

Spirit Digital 328 v2

The 1212 will commonly be used with a software sequencer/hard disk recorder to allow play back

and recording of 8 individual tracks of audio, via the ADAT I/O. Here, the software application

must be configured to access the 1212 ADAT I/O via the relevant Windows device drivers that

came with the 1212.

When playing back audio tracks from the software application, tracks 1-8 will be accessible from

channels 17-24 respectively in the Tape Fader Bank on the 328.

To record a signal onto a track within the software application, send the required channels to

Tape Sends 1-16. See the 328 manual for full instructions on how to send a channel to tape.

Ensure that the relevant Korg device drivers are fully installed for the software

application to correctly access the 1212 ADAT I/O.

You may wish to utilize the 1212 S/PDIF output to transmit a stereo signal to the 328. Again the

software application must be configured to access the 1212 S/PDIF output via the relevant

Windows device drivers that came with the 1212.

The stereo 1212 S/PDIF input will be accessible on the 328 from either

Stereo Input 1, Stereo Input 2, FX Return 1, FX Return 2, 2 Track Tape Return,

depending on the 328 S/PDIF input setting (see the ‘S/PDIF input’ section in chapter 2 of this

guide).

The 328 can also be configured to transmit a stereo signal back to the 1212 via the 1212 S/PDIF

input. Here the 328 can be set to either transmit any of the following signals to the 1212 S/PDIF

input:

Aux 1/2 sends, Aux 3/4 sends, FX 1/2 sends, Groups 1-8 and Control Room

The desired setting can be configured via the ‘S/PDIF O/P Setup’ menu on the 328 (see the 328

manual for full instructions).

Again, ensure that the relevant Korg drivers are fully installed for the software application to

correctly access the 1212 S/PDIF I/O.

4Using The 1212 With The 328

Using The 1212 With The 328Using The 1212 With The 328

Using The 1212 With The 328

Accessing The 1212 ADAT I/O From The 328

Accessing The 1212 ADAT I/O From The 328Accessing The 1212 ADAT I/O From The 328

Accessing The 1212 ADAT I/O From The 328

Accessing The 1212 S/PDIF I/O From The 328

Accessing The 1212 S/PDIF I/O From The 328Accessing The 1212 S/PDIF I/O From The 328

Accessing The 1212 S/PDIF I/O From The 328

Korg 1212 Setup Guide

If used in conjunction with an ADAT, the system should be connected as follows:

Additional Information

Additional InformationAdditional Information

Additional Information

ADAT

ADATADAT

ADAT

Digital 328

Digital 328Digital 328

Digital 328

Korg 1212

Korg 1212Korg 1212

Korg 1212

1212 Timecode

1212 Timecode1212 Timecode

1212 Timecode

Conditioner

ConditionerConditioner

Conditioner

ADAT Sync

ADAT SyncADAT Sync

ADAT Sync

Cable

CableCable

Cable

Sync In

ADAT I/O

S/PDIF I/O

Wordclock

Andere Handbücher für Spirit Digital 328 v2

Inhaltsverzeichnis

Andere SoundCraft Musikmixer Handbücher

SoundCraft

SoundCraft Spirit Folio Lite Bedienungsanleitung

SoundCraft

SoundCraft UI12 Bedienungsanleitung

SoundCraft

SoundCraft 400B Series Bedienungsanleitung

SoundCraft

SoundCraft D-Mix 500 Bedienungsanleitung

SoundCraft

SoundCraft GB2R Bedienungsanleitung

SoundCraft

SoundCraft NOTEPAD 102 Bedienungsanleitung

SoundCraft

SoundCraft SPIRIT PRO TRACKER Bedienungsanleitung

SoundCraft

SoundCraft Spirit FX16 Bedienungsanleitung

SoundCraft

SoundCraft LIVE 8 Bedienungsanleitung

SoundCraft

SoundCraft Vi5000 Bedienungsanleitung

SoundCraft

SoundCraft 328xd Bedienungsanleitung

SoundCraft

SoundCraft Series 2 Bedienungsanleitung

SoundCraft

SoundCraft S6000 Bedienungsanleitung

SoundCraft

SoundCraft Vi Series Technisches Handbuch

SoundCraft

SoundCraft RM1ds Bedienungsanleitung

SoundCraft

SoundCraft Spirit Studio LC Bedienungsanleitung

SoundCraft

SoundCraft EFX Bedienungsanleitung

SoundCraft

SoundCraft Venue II Bedienungsanleitung

SoundCraft

SoundCraft COMPACT 4 Bedienungsanleitung

SoundCraft

SoundCraft MFX Bedienungsanleitung

SoundCraft

SoundCraft SPIRIT FOLIO Bedienungsanleitung

SoundCraft

SoundCraft SPIRIT 8 Bedienungsanleitung

SoundCraft

SoundCraft Spirit Digital 328 Montage- und Bedienungsanleitung

SoundCraft

SoundCraft Si Impact Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Roland

Roland M-160 Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

Roland

Roland SoundCanvas SC-8820 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung

Roland

Roland M-16E Bedienungsanleitung