SOUNDMASTER SCD7200WE Bedienungsanleitung

LOCATION OF CONTROL

1. CD DOOR

2. BASS BOOST BUTTON

3. VOLUME CONTROL KNOB

4. FOLDER BUTTON

5. CD/SD/USB BUTTON

6. SKIP/SEARCH BUTTON

7. SKIP/SEARCH BUTTON

8. USB PORT

9. CD STOP BUTTON

10.CD PLAY/PAUSE BUTTON

11.CD MODE BUTTON

12.CD PROGRAM BUTTON

13.CASSETTE PAUSE BUTTON

14.CASSETTE STOP/EJECT

15.CASSETTE F.FWD BUTTON

16.CASSETTE REWIND BUTTON

17.CASSETTE PLAY BUTTON

18. NO FUNCTION

19.LCD DISPLAY

20.SPEAKER LEFT

21.SPEAKER RIGHT

22.CASSETTE DOOR

23.BATTERY DOOR

24.FM ANTENNA

25.BAND SWITCH

26.AUX IN JACK

27.STEREO HEADPHONE JACK

28.FUNCTION SWITCH

29.AC SOCKET

30.TUNING KNOB

31. SD/MMC CARD SLOT

English - 1

POWER SOURCE

AC CONNECTION

Before operation please ensure voltage on the set corresponds to voltage of your local

area. Unravel AC cord set; insert one end into an AC socket on the unit while the other

end into a standard AC outlet.

Remarks: 1) In case of malfunction due to electrostatic discharge (ESD), reset the unit

by reconnecting AC cord again to resume to normal operation.

2) When not in use –Unplug AC power cord completely from AC power

socket. The Mains plug of AC power cord is used as disconnecting device;

the disconnect device shall remain readily operable.

BATTERY INSTALLATION

Disconnect AC Cord set completely. Open the BATTERY DOOR and insert UM-1/ “D” size

x 8 batteries (not supplied) making sure the indicated battery polarity is observed. When

not in use –Remove all batteries if the unit will not be used for several months or more.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the

battery compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old

batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent

damage or injury from possible battery leakage.

5. Do not try to recharge batteries, which not intended to be recharged; they can overheat

and rupture. (Please follow battery manufacturer’s directions.)

6. Battery shall not be exposed to excessive heat such as direct sunlight, fire or the like.

HOW TO USE

RADIO OPERATION

Slide FUNCTION SWITCH to “RADIO” position.

Slide BAND SWITCH to AM or FM waveband.

Turn the TUNING KNOB to your desired radio station.

Adjust sound level by rotating VOLUME CONTROL KNOB.

To turn off the radio, slide FUNCTION SWITCH to “OFF” position.

Note: Radio frequency is shown on LCD DISPLAY.

FM Stereo indicator

When tuned to a FM stereo broadcast, FM stereo ”ST”indicator will

be shown on LCD display.

In weak signal areas where FM Stereo signal may not be strong enough and can cause

excessive background noise. In this case slide the BAND switch to “FM” (mono) position.

CAUTION

There is danger of explosion if battery is incorrectly replaced.

Replace the battery only with the same or equivalent type.

English - 2

Tips for best reception

For best reception, fully extend FM ANTENNA to receive FM

stations.

For AM reception, the unit has a built-in antenna, turn the whole

unit for best reception.

BASS BOOST

To increase bass at all volume levels, press the BASS BOOST

BUTTON to “ON” position to boost low frequency tone for an

emphasized bass sound.

To release super bass, simply push this button to “OFF” position.

CASSETTE OPERATION

Tape playback

Depress STOP/EJECT BUTTON to open cassette door.

Insert a cassette tape into CASSETTE COMPARTMENT and close the door.

Slide FUNCTION SWITCH to TAPE position.

Depress the PLAY BUTTON.

Adjust VOLUME CONTROL KNOB to your desired listening level.

To stop tape playback, depress STOP/EJECT BUTTON.

Fast forward and rewind

The tape can be FAST FORWARDED or REWOUND by depressing FAST

FORWARD or REWIND BUTTON respectively.

Pause function

During playback or recording, the tape can be stopped temporarily by

depressing PAUSE BUTTON.

To continue playback or recording, press the PAUSE BUTTON again.

Auto stop system

When the tape runs to its end during playback or recording, cassette

operation will be stopped automatically.

Caution

To avoid damage to cassette mechanism or cassette tapes, always depress

STOP/EJECT BUTTON between each operation!

English - 3

AUXILIARY (AUX) MODE

1. Slide FUNCTION SWITCH to “AUX” position, “AUX” indicator

will be shown on LCD DISPLAY.

2. Connect the earphone socket from Auxiliary unit (e.g. MP3

player or MD player) into AUX-IN jack on the rear of this product via an Audio Line

Cord (3.5mm plug on both ends; not supplied).

3. Play the Auxiliary unit. Music from Auxiliary unit can be listened through the speaker of

this product.

Stereo headphone jack

For private listening, insert the plug of a stereo headphone into STEREO HEADPHONE

JACK and adjust VOLUME CONTROL KNOB accordingly. During the use of headphone

speakers are automatically disconnected.

Note: Do not listen at extremely high volume level. Extended high volume listening can

lead to permanent hearing loss. Once you set the volume, do not increase it.

Overtime, your ears adapt to the volume level, so a volume level that does not

cause discomfort might still damage your hearing.

CD OPERATION

Playing compact disc (CD-R/RW playback compatible)

Note: Should skipping of track occur during CD playing try reduce the volume. When CD

is playing do not open CD DOOR.

1. Pull up the CD DOOR. Put a CD disc into CD Compartment and close the door. Set

FUNCTION SWITCH to “CD” position. Press CD/UBS/SD BUTTON repeatedly until

LCD DISPLAY shows “DISC” indicator.

Note: Ensure CD DOOR is closed properly and locked in place.

2. When CD DOOR is closed with a CD inside, total track number

in the disc will be shown on LCD DISPLAY and go to CD stop

mode (ex. Total 17 tracks inside the disc). The “DISC” indicator

will always be shown on LCD DISPLAY.

3. If there has no disc inside, LCD DISPLAY will show “ ” and

go to stop mode.

4. If CD DOOR is not closed, LCD DISPLAY will show “ ”.

English - 4

Play/Pause mode

1. When PLAY/PAUSE BUTTON is pressed during CD stop mode,

first track will be played. The Play Indicator “” and specific

number of track being played will be shown on LCD DISPLAY.

2. For interruption while CD is playing, press PLAY/PAUSE

BUTTON once. The Play Indicator “” will blink continuously

on LCD DISPLAY.

3. Though the sound stops, the disc will continue to spin. To

resume playback press PLAY/PAUSE BUTTON again. Music

will start from exact position where it was interrupted.

4. To stop CD, press STOP BUTTON once whether CD is in Play or Pause mode. LCD

DISPLAY will show total track number of the disc again.

5. To turn off the unit, slide FUNCTION SWITCH to “OFF” position.

Skip and Search mode

1. During play or pause mode, when SKIP/SEARCH FORWARDor BACKWARD 

BUTTON is pressed once, it will go to next track or go back to the beginning of the

track.

2. During play mode, when SKIP/SEARCH FORWARD or BACKWARD BUTTON

is pressed and held, it will search the track with audible high-speed forward or

backward playback.

Repeat mode

1. Repeat 1:

When MODE BUTTON is pressed once, Repeat indicator “REP.”

will blink on LCD DISPLAY. This single track of music will be

repeated.

2. Repeat All:

When MODE BUTTON is pressed twice, Repeat indicator “REP”

will stop blinking. The whole disc can be played continuously.

3. To cancel Repeat function

Press the MODE BUTTON repeatedly until Repeat indicator

disappears from LCD DISPLAY.

Random play mode

This feature allows track on the disc to be played in a random order.

1. Press the MODE BUTTON repeatedly until “RAND” indicator

shows on LCD DISPLAY, all music in the playing disc will be

played in random order automatically.

2. To cancel Random play function, press the MODE BUTTON again, “RAND” indicator

will disappear from LCD DISPLAY.

English - 5

Program Mode

1. During CD stop mode, press PROGRAM BUTTON once. The

“PROGRAM” indicator and number of Program to be

memorized starts from the first program “ ” will light up and

blink continuously.

Press SKIP/SEARCH FORWARD or BACKWARD 

BUTTON to your desired musical track, LCD DISPLAY will

show the appropriate track number. Press PROGRAM

BUTTON to store this track in memory.

2. Repeat above procedure until all desired tracks have been programmed. A total of 20

tracks can be stored in memory.

Remarks:

Whenever SKIP/SEARCH FORWARDor BACKWARD BUTTON is pressed, it

will always show the last programmed track first to recall your

memory.

After completing programming 20 tracks, LCD DISPLAY will

show “PROG ” and flash continuously.

3. Press PLAY/PAUSE BUTTON once to start program playback

and CD Play indicator “” will light up.

4. To check the programmed tracks, press PROGRAM BUTTON

once during CD stop mode; then press SKIP/SEARCH FORWARD BUTTON once,

LCD DISPLAY will show the first programmed track number. Repeat above procedure

to read all programmed memory.

5. To cancel programmed memory:

During CD stop mode, press STOP BUTTON once; or open CD DOOR during CD

stop mode. The Program indicator will disappear from LCD DISPLAY.

PLAYING MP3 DISC

Note: Should skipping of track occur during disc playing try reduce the volume. When

MP3 disc is playing do not open CD DOOR.

1. Pull up the CD DOOR. Put a MP3 disc into CD compartment and close the door. Set

FUNCTION SWITCH to “CD” position.

Note: Ensure CD DOOR is closed properly and locked in place.

2. When CD DOOR is closed with a MP3 disc inside, total track

number in the disc will be shown on LCD DISPLAY and go to

stop mode. The “DISC” and “MP3”indicators will be shown on LCD DISPLAY.

3. If there has no disc inside, LCD DISPLAY will show “ ” and go to stop mode.

4. If CD DOOR is not closed, LCD DISPLAY will show “ ”.

English - 6

Play/Pause mode

1. When PLAY/PAUSE BUTTON is pressed during CD stop mode,

the first track will be played. The Play indicator “” and “ ”

indicator will be shown as well to indicate MP3 disc is being

played. LCD DISPLAY will show the specific track number being

played.

2. To select specific musical tracks inside MP3 Disc.

MP3 music can be stored into CD Disc with or without folders according to your “MP3

burning method”.

a. If MP3 disc is downloaded without

dividing into folder, all track numbers

will be shown directly in LCD DISPLAY.

The folder number will always show

after pressing FOLDER BUTTON.

b. If music is stored into different folders, you’ve to select specific folder number first

by pressing FOLDER BUTTON; afterwards press SKIP/SEARCH FORWARDor

BACKWARD BUTTON to select for specific track number inside this folder.

Example: To select for Folder # 4, Track # 3.

STEP –1: Press FOLDER BUTTON to select Folder # 4.

STEP –2: Press SKIP/SEARCH FORWARD or

BACKWARD BUTTON to select for track # 3

inside this Folder # 4.

3. For interruption while MP3 disc is playing press PLAY/PAUSE BUTTON once. The

Play indicator “” will blink continuously on LCD DISPLAY.

4. Though the sound stops, disc will continue to spin. To resume playback, press

PLAY/PAUSE BUTTON again. Music will start from exact position where it was

interrupted.

5. To stop MP3 disc, press STOP BUTTON once whether MP3 disc is in Play or Pause

mode.

6. To turn off the unit, slide FUNCTION SWITCH to “OFF” position.

Repeat mode

1. Repeat 1:

When MODE BUTTON is pressed once, Repeat indicator

“REP.” will blink on LCD DISPLAY. This single track of music

will be repeated.

2. Repeat Folder:

When MODE BUTTON is pressed twice, “REP.” and “FOLDER”

indicators will be shown. This specific folder will be played

repeatedly.

Remarks: The folder number and track number will be shown every 2 seconds

alternatively.

English - 7

3. Repeat All:

When MODE BUTTON is pressed three times, Repeat

indicator “REP” will show on LCD DISPLAY. The whole disc

can be played continuously.

4. To cancel Repeat function

Press the MODE BUTTON repeatedly until Repeat indicator disappears from LCD

DISPLAY.

Random play mode

This feature allows tracks on the disc to be played in a random order.

1. During CD stop mode, press MODE BUTTON four times,

“RAND” indicator will show on LCD DISPLAY and all music will

be played in random order automatically.

2. To cancel Random play function, press MODE BUTTON again,

“RAND” indicator will disappear from LCD DISPLAY.

MP3 Program mode

1. During CD stop mode press PROGRAM BUTTON once. The

“PROG”indicator and number of Program to be memorized

starts from the first program “ ” will light up and blink

continuously. Press FOLDER BUTTON, then press CD

SKIP/SEARCH FORWARD or BACKWARD BUTTON to select your desired

musical track; LCD DISPLAY will show the track number of this specific folder to be

programmed. Press PROGRAM BUTTON to store this track in memory.

2. Repeat above procedure until all desired tracks have been programmed.

Remarks: Whenever FOLDER BUTTON is pressed it will always show the last

programmed folder number first to recall your memory.

A total of 20 tracks can be stored in memory. After complete programming, LCD

DISPLAY will show “PROG _ _ _” .

3. To start Programmed playback, press CD PLAY/PAUSE BUTTON once and CD Play

indicator “”, “PROG” and track number of the specific folder will light up.

Example: Folder # 3, Track # 2.

4. To check the program you have stored after complete programming, press

PROGRAM BUTTON once during CD stop mode. LCD DISPLAY will show “ ” and

blink continuously. Press FOLDER BUTTON to read folder number; then press

SKIP/SEARCH FORWARD or BACKWARD BUTTON to read the specific track

number of said folder. Press PROGRAM BUTTON again, LCD DISPLAY will show

“ ” and blink continuously. Repeat above procedure to check all programs being

stored.

English - 8

5. To cancel programmed memory:

During CD stop mode, press STOP BUTTON once; or open CD Door during CD stop

mode. The “PROG” indicator will disappear from LCD DISPLAY.

USB OPERATION

IMPORTANT NOTE:

This unit supports most of the common MP3 interface but not 100% because there

are too many different formats keep on changing in the market.

1. Slide FUNCTION SWITCH to “CD” position.

2. Press CD/UBS/SD BUTTON repeatedly until LCD DISPLAY shows “USB” indicator.

Remarks: When there has no MP3 Player or Flash drive

connecting to USB PORT, LCD DISPLAY will show

“ ”.

3. Insert USB plug of an Auxiliary unit (e.g.: Portable MP3 Player

or Flash Drive) into USB PORT, total number of music will be

shown on LCD DISPLAY.

4. Press PLAY/PAUSE BUTTON to play music.

5. Operate all CD control buttons same as above- mentioned section “PLAYING MP3

DISC”; they have same function and operation method.

6. To exit from USB playback mode, press CD/UBS/SD BUTTON repeatedly until LCD

DISPLAY shows “DISC”. It will go back to CD mode again.

SD/MMC CARD OPERATION

IMPORTANT NOTE:

This unit supports most of the common MP3 interface but not 100% because there

are too many different formats keep on changing in the market.

Slide FUNCTION SWITCH to “CD” position.

1. Press CD/UBS/SD BUTTON repeatedly until LCD DISPLAY shows “CARD” indicator.

Remarks: When there has no SD/MMC card inside CARD

SLOT, LCD DISPLAY will show “ ”.

2. Insert a SD/MMC card into SD/MMC card slot, total number of

music will be shown on the display.

3. Press CD PLAY/PAUSE BUTTON to play music.

4. Operate all CD control buttons same as above-mentioned

section “PLAYING MP3 DISC”, they have same function and operational method.

5. To exit from SD/MMC CARD playback mode, press CD/UBS/SD BUTTON repeatedly

until LCD DISPLAY shows “DISC”. It will go back to CD mode again.

English - 9

SPECIFICATION

Frequency Range ----------------- AM 522 –1620 kHz

FM 87.5 –108 MHz

Output Power ---------------------- 2 x 3 Watts RMS

Speaker ----------------------------- 4 Ohms

Power Supply ---------------------- AC 230V ~ 50Hz

12V DC (8 x 1.5V Type UM-1 / D-CELL or equivalent)

Power consumption -------------- 23 W

Dimension of Unit----------------- 422(W) x 170(H) x 248(D) mm

Weight ------------------------------- 2.9 kg

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

CARE AND MAINTENANCE

COMPACT DISCS

Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to

contact with the shiny, unprinted side of the disc.

Do not attach adhesive tape, stickers etc., to the disc label.

Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or adhesive

cleaners to clean the disc. If necessary, use a CD cleaning kit.

If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged

(scratched).

When cleaning the disc, wipe in straight lines from the center of the disc to the edge of the

disc. Never wipe in circular motions.

To remove a disc from its storage case, press down on the center of the case and lift the

disc out, holding it carefully by the edges.

Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft

cloth. Unlike conventional records, compact discs have no groove to collect dust and

microscopic debris, so gently wiping with a piece of soft cloth should remove most

particles.

IMPORTANT NOTICE

For energy saving, whenever at CD, USB , SD or AUX mode, user not use the

apparatus over 15 minutes, the apparatus will turn to standby mode (without

any display) automatically

To turn on the apparatus again, pressing the play/pause button once or re-

setting the FUNCTION SWITCH again.

Inhaltsverzeichnis

Andere SOUNDMASTER CD-Player Handbücher

SOUNDMASTER

SOUNDMASTER SCD-6300MP3 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD5701 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER CD9290 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER High line SCD 2700USB Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD6500USB Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD-5500 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER URD 700 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD5410 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER CD9110 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER URD-800 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD5410 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER CD9250 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD-2650 USB Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER KCD1600 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER CD9180 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD 2400 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER RCD1180 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD-5600 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD8000 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER CD-9135MP3 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER RCD1200 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER MCD7950 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER SCD5950SW Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER RCD1750SI Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung