Soundwin SP110 Bedienungsanleitung
1
SP110
Skype Phone Adapter
Version 1.0.10
WAN IP Address: DHCP
LAN IP Address: http://10.0.0.1
Password: 1234
User Manual
Default Login Detail
2
Table of Contents
INTRODUCE.....................................................................................................................3
1.1 OVERVIEW 3
1.2 INTRODUCTION 3
1.3 FRONT PANEL LED INDICATORS &REAR PANELS 3
1.4 SPECIFICATION 4
INSTALLATION AND SETUP .............................................................................................5
2.1 PACKAGE CONTENT 5
2.2 HARDWARE INSTALLATION 5
2.3 QUICK START 8
NETWORK SETTING (WAN) .............................................................................................9
3.1 SYSTEM STATUS 9
3.2 WAN INTERFACE 9
STATIC IP 9
DHCP CLIENT 10
PPPOE 10
SKYPE ACCOUNT SETTING.............................................................................................12
4.1SKYPE ACCOUNT SETTING 12
4.2SPEED DIAL SETTING 12
ADVANCE SETTING........................................................................................................14
5.1 PHONE SETTING 14
5.2 LANDLINE DIAL PLAN LIST (FOR SKYPE FIRST MODE ONLY) 14
5.3 LAN SETTING 15
5.4 UPDATE SYSTEM 16
5.5 SET TO DEFAULT 16
5.6 SYSTEM AUTHORITY 16
5.7 SAVE AND REBOOT 16
Q&A? 18
APPLICATION 18
3
1
Introduce
This document describes the usage of SP110 (Skype Phone Adapter)
1.1 Overview
Enjoy Skype Calls from your telephone
The SP110 Skype Phone Adapter lets you make calls from your Skype account by
telephone, includes Skype to Skype calls, Skype to Mobile and landline calls.
No PC required
The SP110 Skype Phone adapter lets you make and receive Skype calls at any time,
without having your computer on.
Speed Dial List
The SP110 Skype Phone adapter can store up to 100 speed dials of Skype contacts.
Life line support
The SP110 supports Lifeline, allows users to use PSTN phone service and Skype
service at the same time. Users can make emergency calls, or have mobile and
landline calls by PSTN line.
1.2 Introduction
This Skype Phone Adapter (SP110) provides let you make call via your Skype account
to save the call fee.
Model
WAN Port
LAN Port
FXS Port
Line Port
RJ-11 port
SP110
1
1
1
1
2
1.3 Front Panel LED Indicators & Rear Panels
SP110
4
LED
Status
Description
Power
On
SP110 is power on
Off
SP110 is power off
LAN
On / Flashing
Ethernet cable was connected
Off
Ethernet not connected to PC
WAN
On / Flashing
Ethernet cable was connected
Off
Waiting for network connection
Login
On
Login Skype account successfully.
Off
Login Skype account fail
FXS(Phone)
Off
Telephone Set is On-Hook
Flashing
Ring Indication
On
Telephone Set is Off-Hook
Balance
On (Orange)
Skype credit is 0.
1.4 Specification
Speed Dial List
Allows users to define the speed-dial of their most contacted Skype contacts by
assigning each a unique short cut key with which to initiate a call. To start a call just
dial * before the speed dial number.
Skype Feature
Voice Codec: Skype codec
Skype call first mode and Landline call first mode for selection
Phone Feature
Volume Adjustment
Country Tone Configuration
IP Specifications:
WAN: PPPoE client, DHCP client, Fix IP Address
NAT Functions
Configuration and Management
Web-Based Graphical UI Configuration
HTTP Firmware Upgrade
General Specification
AC power: AC100V-240V, DC12V/0.5A, 50/60 Hz
Temperature: 0°C ~ 40°C (Operation)
Humidity: up to 90% non-condensing
Emission: FCC Part 15 Class B, CE Mark, RoHS Compliant
Dimension : 98 x 85 x 30 mm
Weight: 110 g
5
2
Installation and Setup
2.1 Package Content
Please check enclosed product and its accessories before installation. These contents
are from pre-released product. The contents for the final product might change a little
bit.
SP110 Package
(SP110) (RJ45 cable)
(RJ11 telephone line) (Power adapter)
The SP110 packet contents:
SP110
RJ-45 cable line
RJ-11 telephone line
AC Power Adapter (0.5A)
Quick Guide
X1
X1
X1
X1
X1
2.2 Hardware Installation
6
Port Description:
Power
Reset
WAN
LAN
Phone
Line
Item
Port
Description
1
FXS(Foreign Exchange
Station)
FXS port can be connected to analog
telephone sets
2
Line
Connect to CO line with RJ-11(Gray) analog
line.
3
WAN(Wide Area Network)
Connect to the network with an Ethernet
cable. This port allows your ATA to be
connected to an Internet Access device, e.g.
router, cable modem, ADSL modem, through a
networking cable with RJ-45 connectors used
on 10BaseT and 100BaseTX networks.
4
LAN(Local Area Network)
Connect to PC with Ethernet cable. 1 port
allows your PC or Switch/Hub to be connected
to the ATA through a networking cable with
RJ-45 connectors used on 10BaseT and
100BaseTX networks.
5
RES(Reset button)
Push this button until 5 seconds and ATA will
be set to factory default configuration.
6
AC power(DC in 12V)
A power supply cable is inserted
Installation:
1 Connect the 12V DC IN to the power outlet with power adaptor.
2 Connect FXO to PSTN.
3 Connect FXS to a telephone jack with the RJ-11 analog cable.
Connecting to a PC:
1 Connect the Ethernet cable (with RJ-45 connector) to any LAN port.
2 Connect the other end of the Ethernet cable to your PC’s installed network interface
card (NIC).
Connecting to an External Ethernet Hub or Switch:
1 Connect the Ethernet cable (with RJ-45 connector) to WAN port.
2. Connect the other end of the Ethernet cable to DSL/Cable modem or the external
7
Ethernet hub or switch.
8
2.3 Quick Start
How to set your network environment?
SP110 default network environment:
For WAN:
Wan type: DHCP client
For LAN:
IP: 10.0.0.1
Subnet mask: 255.255.255.0
How to configure SP110?
1. Configure your PC or NB to the same subnet with SP110.
2. Use web browser (IE/Firefox) link to url: http://10.0.0.1
3. Select language: English or Chinese
4. Login password: 1234
5. Use this web configuration interface to configure all system functionality; firstly you
should change the WAN network environment to yours.
6. Key in your Skype account and password to log in your Skype account
7. If you only call land line number and mobile number, you can make call after login
your Skype account successfully.
(Please make sure you have Skype credit already.)
8. If you would like to call other Skype account, you need to setup the speed dial list.
9
3
Network Setting (WAN)
3.1 System Status
The page included Skype account and log in status, also the firmware version and WAN
ip information.
3.2 WAN Interface
WAN Setting is used to connect to your ISP (Internet Service Provider). The WAN
settings are provided to you by your ISP and often times referred to as "public settings".
Please select the appropriate option for your specific ISP.
SP110 support three methods for Internet access:
Static IP
DHCP
PPPoE
Static IP
If you are a leased line user with a fixed IP address, enter the IP address, subnet mask,
gateway address and DNS (domain name server) address(es) provided by your ISP. Each
IP address entered in the fields must be in the appropriate IP form, which are four IP
octets separated by a dot (x.x.x.x). Example: 168.95.1.1
10
■IP Address: Check with your ISP provider.
■Subnet Mask: Check with your ISP provider.
■Default Gateway: Check with your ISP provider.
DHCP client
Dynamic Host Configuration Protocol (DHCP), Dynamic IP (Get WAN IP Address
automatically). If you are connected to the Internet through a Cable modem line, then a
dynamic IP will be assigned.
Note: WAN port gets the IP Address, Subnet Mask and default gateway IP address
automatically, if DHCP client is successful.
PPPoE
Point-to-Point Protocol over Ethernet (PPPoE). Some ISPs provide DSL-based services
and use PPPoE to establish communication link with end-users. If you are connected to
the Internet through a DSL line, please check with your ISP to see if they use PPPoE.
Inhaltsverzeichnis
