Source 1 S1-TBSU22HN Betriebsanleitung
Owner’s Manual
Owner’s Manual
Digital Thermostat
LX Series
Digital Thermostat
LX Series
COMMERCIAL
S1-TBSU22HN
S1-TBSU32P7
S1-TBSU32HP7
Model
BACKLIT DISPLAY
and
and
Installation Instructions
Installation Instructions
OVERRIDE
Page i
NOTE: Due to variations in environmental conditions, it is not
always possible to achieve the desired humidification or
dehumidification setpoint.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Follow the Installation Instructions before proceeding.
Set the thermostat mode to “OFF” prior to changing
settings in setup or restoring Factory Defaults.
CAUTION
C
c
F
FOR HOME OR OFFICE USE
Tested to Comply
with FCC Standards
Thermostat LX
4Z95
Glossary of Terms
Page ii
Auto-Changeover: A mode in which the thermostat will turn on the
heating or cooling based on room temperature demand.
Cool Setpoint: The warmest temperature that the space should rise
to before cooling is turned on (without regard to deadband).
Deadband: The number of degrees the thermostat will wait, once a
setpoint has been reached, before energizing heating or cooling.
Dehumidify: To reduce the amount of moisture in the air.
Differential: The forced temperature difference between the heat set-
point and the cool setpoint.
Heat Setpoint: The coolest temperature that the space should drop
to before heating is turned on (without regard to deadband).
Humidify: To increase the amount of moisture in the air.
Icon: The word or symbol that appears on the thermostat display.
Mode: The current operating condition of the thermostat (i.e. Off,
Heat, Cool, Auto, Program On).
Non-Programmable Thermostat: A thermostat that does not have
the capability of running Time Period Programming.
Programmable Thermostat: A thermostat that has the capability of
running Time Period Programming.
Reheat: Running the cooling and 2nd stage strip heaters at the same
time in order to dehumidify the air without cooling down the room
temperature.
Temperature Swing: Same as Deadband.
Time Period Programming: A program that allows the thermostat to
automatically adjust the heat setpoint and/or the cool setpoint based
on the time of the day.
Table of Contents
Page iii
5
1
17
18
23
24
24
25
26
27
28
31
15
Quick Start
Get to Know Your Thermostat
USER SETUP
Programming Fan Operation
Thermostat Display Options
Humidification & Dehumidification
Timers and Deadbands
Remote Sensor Operation
Auxiliary Output
Factory Defaults
Dry Contact Operation
INSTALLER SETUP
16
Scrolling Display Options
System Runtimes
Time Period Programming
Program Mode Operation
TECHNICIAN SETUP
36
Advanced Output Testing
Programming Holiday Mode
Equipment Testing
Comfort Recovery Operation
21
Backlight Operation
32
33
Troubleshooting
Sensor Calibration 32
32
INDEX
16
17
Emergency Heat
20
34
Advanced Setup Table
7
INSTALLATION INSTRUCTIONS
Sample Wiring Diagrams 11
Test Operation 14
OVERRIDE
OVERRIDE
HOLIDAY
MODE
Page 1
Emergency
Heat Holiday Accessory
Humidity*
Outdoor Temp.
Mode
Cooler
Button Override
Button Warmer
Button
Heat or Cool
Demand Indicator
Red = Heat, Green = Cool
Backlit LCD Display
Display
Options
Setup
Program
Off | Run | Set
Set
Clock
Get to Know Your Thermostat
Front Panel
Scrolling Display
(This feature not available on all models)
SERVICE
on some models
(
(
RST FLTR
on some models
(
(
FAN
on some models
(
(
H
Lo
Program ONOFF
Outdoor
Fan On
COOL SET
A HEAT ETUX S
Setup Step
2nd3rd
Stage
Am
Pm
18:88
188
188
88
188
Page 2
Mode Indicators
Selects the operational mode of the equipment.
HEAT - Indicates the heating mode.
COOL - Indicates the air conditioning mode.
HEAT & COOL - Indicates the system will automatically change-
over between heat and cool modes as the temperature varies.
OFF - Indicates heating and cooling is turned off.
Clock with Day of the Week
Indicates the current time and day. This clock is also used to
program the time period schedules.
Room Temperature Display
Indicates the current room temperature and displays the outdoor
temperature when selected.
Outdoor icon
Indicates the temperature displayed is from the optional outdoor
sensor.
The scrolling display will be used to help you easily navigate the setup
screens in the thermostat.
Get to Know Your Thermostat
6
Program icon
Indicates that Time Period Programming is enabled to be set.
6
Unoccupied123
Override
Display Features
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Source 1 Thermostat Handbücher
Source 1
Source 1 S1-THEH21P5S Bedienungsanleitung
Source 1
Source 1 S1-THEC11P5S Bedienungsanleitung
Source 1
Source 1 S1-THSU303-S Originalbetriebsanleitung
Source 1
Source 1 S1-TBSU306-S Originalbetriebsanleitung
Source 1
Source 1 S1-THSU301-S Originalbetriebsanleitung
Source 1
Source 1 S1-TBSU305-S Originalbetriebsanleitung
Source 1
Source 1 S1-THEU21P7S Bedienungsanleitung
Source 1
Source 1 S1-THEH21NS Bedienungsanleitung
Source 1
Source 1 S1-TBSU304-S Originalbetriebsanleitung
Source 1
Source 1 S1-THEM22P7S Bedienungsanleitung
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
