Southern Enterprises 12877 Bedienungsanleitung

For assistance with assembly, contact:

Southern Enterprises Inc.

customer service 1-800-633-5096

service@seidal.com

www.seidal.com

MS333400TX – ESPRESSO

LADDER MEDIA STAND

Assembly Instructions

PO#12877

Quantity

of 1

bottom panel

Quantity

Of 1

left side panel

Quantity

of 1

right side panel

Quantity

Of 1

top center panel

Quantity

of 1

bottom center panel

Quantity

Of 1

back panel

Quantity

of 1

bottom left post

Quantity

Of 1

bottom right post

Quantity

of 1

top right post

Quantity

of 1

top panel

Quantity

Of 1

shelf panel

LADDER MEDIA TAND

Parts List

Please review all parts and hardware before disposing of any packaging.

Call customer service if missing hardware.

Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study the

screw diagrams below. You may receive extra hardware with your unit.

drawer back panel

Quantity

of 2

drawer bottom panel

Quantity

of 2

middle leg

Quantity

of 1

bottom shelf panel

Quantity

of 1

drawer front

Quantity

of 2

drawer left side panel

Quantity

of 2

drawer right side panel

Quantity

of 2

top shelf panel

Quantity

of 1

medium shelf panel

Quantity

of 1

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

Quantity

of 20

cam bolt

Quantity

Of 20

cam lock

Quantity

of 36

Quantity

Of 4

Φ5/16”*1”

wood dowel

Φ5/16”*1-3/16”

wood dowel

Quantity

of 10

Φ1/4”*1”

hexagon head bolt

Quantity

Of 10

spring washer

Quantity

of 10

flat washer

Quantity

Of 1

allen wrench

Quantity

of 2

Quantity

Of 4

cross socket nut

Quantity

of 16

Φ5/32*1”

screw

Quantity

Of 16

Φ1/4”*1-3/16”

wood dowel

Quantity

of 2

drawer handle

Quantity

of 4

Φ5/32”*3/4”

bolt

(15)

(16)

(17)

(18)

(19)

(20)

(21)

(22)

(23)

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish.Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please

call customer service at 1-800-633-5096.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

Tool List: 3/16" drill bit, drill, tape measure and pencil.

Quantity

of 12

L bracket

Quantity

of 36

Φ5/32”*7/16”

screw

Quantity

of 6

wooden plug

Quantity

of 24

sticker cover

Quantity

of 4

anti-tip bracket

Quantity

of 2

plastic strap

Quantity

of 2

Quantity

of 2

plastic anchor

Φ5/32”*9/16”

short screw

Quantity

of 2

Φ5/32”*1”

long screw

Insert cam locks (2) into holes on top center

panel (F).

Screw cam bolts (1) into holes on shelf panel

(B).

Insert cam locks (2) into corresponding holes on

panel (F). Attach top center panel (F) to shelf

pane l (B) by inserting wood dowel (3) and cam

bolt (1) into corresponding holes until top center

panel (F) to shelf panel (B) meet. Make sure

finished edges are facing forward.

Secure by rotating cam lock (2) clockwise with

phillips screwdriver.

Cover cam locks (2) with sticker cover (17).

Insert cam locks (2) into holes on bottom center

panel (G).

Screw cam bolts (1) into holes on shelf panel

(B).

Attach bottom center panel (G) to shelf panel (B)

by inserting wood dowel (3) and cam bolt (1) into

corresponding holes until bottom center panel

(G) to shelf panel (B) meet.

Secure by rotating cam lock (2) clockwise with

phillips screwdriver.

Cover cam locks (2) with sticker cover (17).

Insert cam locks (2) into holes on

pre-assembled unit.

Screw cam bolts (1) into holes on right side

panel (E) and left side panel (D).

Attach right side panel (E) and left side panel (D)

to shelf panel (B) by inserting wood dowel (3)

and cam bolt (1) into corresponding holes until

right side panel (E) and left side panel (D) meet

shelf panel (B).

Secure by rotating cam lock (2) clockwise with

phillips screwdriver.

Cover cam lock (2) with sticker cover (17).

LADDER MEDIA TAND

Assembly Instructions

Figure 1

( 2)

( 1)

"Please do not over tighten cam bolts.

Please stop when you feel tight"

Figure 2

Figure 3

Insert cam locks (2) into holes on

pre-assembled unit.

Screw cam bolts (1) into holes on top panel (A).

Attach top panel (A) to right side panel (E), top

center panel (F), and left side panel (D) by

inserting wood dowels (3) and cam bolts (1) into

corresponding holes until top panel (A) meets

panels (E, F, D). Secure by rotating cam lock (2)

clockwise with phillips screwdriver.

Cover cam lock (2) with sticker cover (17).

Slide back panel (H) into grooves of left side

panel (D) and right side panel (E).

Insert cam locks (2) into holes on

pre-assembled unit.

Screw cam bolts (1) into holes on bottom panel

(C).

Attach bottom panel (C) to right side panel (E),

bottom center panel (G), and left side panel (D)

by inserting wood dowel (3) and cam bolt (1) into

corresponding holes until bottom panel (C)

meets panels (E, G, D). Secure by rotating cam

lock (2) clockwise with phillips screwdriver.

Cover cam locks (2) with sticker cover (17).

Figure 4

Figure 5

Figure 6

Insert wood dowel (4) into corresponding holes

on bottom left post (I). Attach bottom left post (I)

to left side panel (D) using hexagon head bolt

(5), spring washer (6), and flat washer (7).

Tighten with allen wrench (8) as shown on inset.

Note: Make sure the angled end on bottom

left post (I) is facing down.

Cover hexagon head bolt (5) with sticker cover

(17).

Insert wood dowel (4) into corresponding holes

on bottom right post (J).Attach bottom right post

(J) to right side panel (E) using hexagon head

bolt (5), spring washer (6), and flat washer (7).

Tighten with allen wrench (8), as shown on

inset.

Note: Make sure the angled end on bottom

right post (J) is facing down.

Cover hexagon head bolt (5) with sticker cover

(17).

Screw middle leg (U) to bottom panel (C).

Insert wood dowel (3) in corresponding holes on

top shelf panel (M), medium shelf panel (N), and

bottom shelf panel (O).

Attach top left post (K) to top shelf panel (M),

medium shelf panel (N), and bottom shelf panel

(O) using hexagon head bolt (5), spring washer

(6), and flat washer (7) as shown on the inset.

Tighten with allen wrench (8).

Note: Make sure the angled edge on shelves

(M), (N), and (O) are facing forward.

Cover hexagon head bolt (5) with wooden plug

(18).

Figure 7

Figure 8

Figure 9

Insert wood dowel (3) in corresponding holes on

top shelf panel (M), medium shelf panel (N), and

bottom shelf panel (O).

Attach top right post (L) to

top shelf panel (M), medium shelf panel (N), and

bottom shelf panel (O) by using hexagon head

bolt (5), spring washer (6), and flat washer (7).

Tighten with allen wrench (8).

Cover hexagon head bolt (5) with wooden plug

(18).

Partially unscrew cross socket nut (10), using

phillips screwdriver, to make room for pin (9) to

be inserted. Insert cross socket nut (10) into

corresponding holes on bottom right post (J) and

bottom left post (I). Insert pin(9) into

corresponding holes on bottom right post (J) and

bottom left post (I), as shown in figure 11. Make

sure pin (9) goes through cross socket nut (10).

Then, screw cross socket nut (10) clockwise to

secure pin in place. Repeat this step for top right

post (L) and top left post (K).

Attach top right post (L) to bottom right post (J),

and attach top left post (K) to bottom left post (I)

using wood dowel (3), Pin (9), and cross socket

nut (10).

Attach L brackets (15) to the edge of top post

and each shelf panel in figure 12. Tighten L

brackets (15) with screw (16) using phillips

screwdriver.

Figure 11

Figure 12

Figure 10

Join drawer front (P) to drawer left side panel

(Q) by using wood dowel (12) and screw (11),

tighten with a phillips screwdriver.

Join drawer back panel (S) to drawer left side

panel (Q) using wood dowel (12) and screw

(11), tighten with a phillips screwdriver.

Slide bottom panel (T) into grooves of drawer

front (P) and drawer back panel (S).

Join drawer right side panel (R) to drawer front

(P) and drawer back panel (S) using wood

dowel (12) and screw (11), tighten with phillips

screwdriver.

Attach drawer handle (13) to drawer front (P)

with bolt (14) tighten with a phillips screwdriver.

Repeat assembly steps for the second drawer.

Slide the two drawers into the pre-fitted metal

slides on left side panel (D), right side panel (E),

and bottom center panel (G). Make sure the

drawers slide smoothly in and out.

Figure 13

Figure 14

Andere Southern Enterprises Inneneinrichtung Handbücher

Southern Enterprises

Southern Enterprises Andress HO0163A0TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises BE908100TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises JS5533 Bedienungsanleitung

Southern Enterprises

Southern Enterprises Hendrik End Table Trunk Bedienungsanleitung

Southern Enterprises

Southern Enterprises DN389500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises HZ104800TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises Francesca Vanity Set Bedienungsanleitung

Southern Enterprises

Southern Enterprises MS040500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises MS341700TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises HZ349500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises EN810100TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises 13876 Bedienungsanleitung

Southern Enterprises

Southern Enterprises CM404300TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises Ryecroft CK045200TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises HZ104300TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises Julia JS701100TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises Ava CK437300TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises HZ105100TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises 13876 Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK012400TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises Dynasty BC403400TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises ARGO 349500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises Sofia HZ103600TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises HZ104100TX Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung

Case

Case Matthew Hilton Cross Sideboard Bedienungsanleitung