Southern Enterprises Larkin MS340500TX Bedienungsanleitung

MS340500TX

Larkin Media Console

Assembly Instructions

For assistance with assembly, contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

[email protected]om

www.seidal.com

Page 1

Quantity

of 1

Top Panel

Quantity

of 1

Bottom Panel

Quantity

of 1

Middle Panel

Quantity

of 1

Left Vertical Panel

Quantity

of 1

Right Vertical Panel

Quantity

of 1

Left Side Panel

Quantity

of 1

Right Side Panel

Quantity

of 1

Fixed Shelf Panel

Quantity

of 1

Left Door

Quantity

of 1

Right Door

Quantity

of 4

Leg

Quantity

of 1

Back Panel

Quantity

of 20

Cam Bolt

Quantity

of 20

Cam Lock

Quantity

of 20

Wood Dowel: Dia5/16”x1-1/4”

Quantity

of 18

Screw: Dia 1/8”x1/2”

Quantity

of 4

Small Bolt: Dia5/32”x3/4”

Quantity

of 26

Screw: Dia 1/8”x1/2”

Larkin Media Console

Parts list

Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,

padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if

hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your

hardware according to the pictures. Using the incorrect hardware will cause damage.

Page 2

Quantity

of 4

Hinge

Quantity

of 2

Handle

Quantity

of 8

Bolt: Dia1/4”x2”

10.

Quantity

of 1

Allen Wrench

Quantity

of 4

Double

Sided Bolt: Dia5/16”x2-3/4”

Quantity

of 4

Half Moon Washer

Quantity

of 4

Nut

Quantity

of 1

Wrench

Quantity

of 2

Magnet

16.

Quantity

of 2

Magnet Plate

Quantity

of 4

Screw: Dia 1/8”x5/8”

Quantity

of 4

Screw: Dia1/8”x1-3/8”

Quantity

of 4

Bracket

Quantity

of 2

Plastic Strap

Quantity

of 4

Plastic Anchor

22.

Quantity

of 20

Cover

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish.Avoid rubbing or scratching the

surface with rough or abrasive objects.

Call customer service at 1-800-633-5096

for assistance, questions, or Parts.

Assembly Tool Required No.2 Phi

Tool List: 3/16" Drill Bit, Drill, Tape Measure and Pencil.

Page 3

Assembly Tool Required No.2 Phillips

Screwdriver (Not included)

Figure

Screw Double Sided Bolts (11) into

each Leg (K) as shown.

Figure

Insert the attached Double Sided

Bolts (11) on the Legs (K) into the

corresponding holes on Bottom

Panel (B).

Insert the Half Moon Washers (12)

into the large holes on the bottom of

Bottom Panel (B) and insert them

onto the Double Sided Bolts (11).

Screw Nuts (13) onto the Double

Sided Bolts (11) to secure the Legs

(K) onto the Bottom Panel (B).

Tighten Nuts (13) with Wrench (14).

Larkin Media Console

Assembly Instructions





 





Page 4

Figure

Turn the assembled unit from

Figure 2 right side up.

Attach Middle Panel (C) onto the

unit from Figure 2 with Bolts (9).

Tighten Bolts with Allen Wrench

(10).

Figure 4

Screw Cam Bolts (1) into threaded

holes on Left Vertical Panel (D) and

Right Vertical Panel (E).

Insert Wood Dowels (3) into

corresponding holes on Fixed Shelf

Panel (H).

Attach Left Vertical Panel (D) and

Right Vertical Panel (E) onto Fixed

Shelf Panel (H) by inserting

attached Wood Dowels (3) and

Cam Bolts (1) into corresponding

holes until all panels meet.

Insert Cam Locks (2) into

corresponding holes on Fixed Shelf

Panel (H).

Rotate Cam Locks (2) clockwise

with Phillips screwdriver to secure

panels.

age

























Figure 5

Screw Cam Bolts (3) into

corresponding threaded holes on

Middle Panel (C). Insert Wood

Dowels (3) into corresponding holes

on Middle Panel (C).

Attach assembled unit from Figure

4 onto Middle Panel (C) by inserting

Wood Dowels (3) and Cam Bolts (1)

into corresponding holes until all

panels meet.

Insert Cam Locks (2) into the

corresponding holes on the

assembled unit from Figure 4.

Tighten by rotating Cam Locks (2)

clockwise with Phillips screwdriver.

Figure 6

Screw Cam Bolts (1) into

corresponding threaded holes and

insert Wood Dowels (3) on the four

corners of assembled unit from

Figure 5.

Attach Left Side Panel (F) and Right

Side Panel (G) to assembled unit

from Figure 5 by inserting Wood

Dowels (3) and Cam Bolts (1) into

corresponding holes until all panels

meet.

Insert Cam Locks (2) into

corresponding holes on Left Side

Panel (F) and Right Side Panel (G).

Tighten by rotating Cam Locks (2)

clockwise with Phillips screwdriver,

Page 6



















Figure

Attach Magnet (15) to Top Panel

(A) with Screws (6).

Tighten screws with Phillips

screwdriver.

Figure

Screw Cam Bolts (1) and insert

Wood Dowels (3) into Top Panel

(A).

Attach Top Panel (A) to the

assembled unit from Figure 6 by

inserting Wood Dowels (3) and

Cam Bolts (1) into corresponding

holes until all panels meet.

Insert Cam Locks (2) into

corresponding holes on the

assembled unit from Figure 6.

Tighten by rotating Cam Locks (2)

clockwise with Phillips screwdriver.

Page 7















Figure 9

Attach Back Panel (L) to the

assembled unit from Figure 8 with

Screws (6).

Tighten screws with Phillips

screwdriver.

Figure 10

Attach Hinge (7) and Magnet Plate

(16) to Left Door (I) with Screws

(4).

Tighten screws with Phillips

screwdriver.

Attach Handle (8) to Left Door (I)

with Bolts (5).

Tighten bolts with Phillips

screwdriver.

Figure 11

Attach Hinge (7) and Magnet Plate

(16) to Right Door (J) with Screws

(4).

Tighten screws with Phillips

screwdriver.

Attach Handle (8) to Right Door (J)

with Bolts (5).

Tighten bolts with Phillips

screwdriver.























Page 8

Figure 12

Attach doors to the assembled

unit from Figure 9 with Screws

(4).

Tighten screws with Phillips

screwdriver.

Cover cam lock hole with Cover

(22).

Figure 13

Attach Brackets (19) to Back

Panel using Screws (17).

Tighten Screws (17) using Philips

screwdriver.







Page 9

Figure 14

Mark two desired locations on the

wall matching the distance of the

Brackets (19) on the back of the

unit and Drill them with a 3/16"

drill bit.

Insert Plastic Anchors (21) into

the 2 holes on wall as shown.

(When doing this, you will need a

hammer help you).

Then, attach the Brackets (19) to

the wall using Screws (18).

Tighten Screws (18) using Philips

screwdriver.

Figure

Move this item close to the wall

Brackets (19) and tie in both

Brackets (19) with Plastic Straps

(20) as shown in diagram.

Anti-tipping hardware

must be used for this

produ t to avoid tipping

and injury.

Wall









Page 10

Inhaltsverzeichnis

Andere Southern Enterprises Inneneinrichtung Handbücher

Southern Enterprises

Southern Enterprises FA8545BRTX Installationsanleitung

Southern Enterprises

Southern Enterprises BC961400TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises Avena Bench Bedienungsanleitung

Southern Enterprises

Southern Enterprises ARGO 349500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises WS682500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises 13224 Bedienungsanleitung

Southern Enterprises

Southern Enterprises Ava CK437300TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises HO862300TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises SEI-HZ6406 Bedienungsanleitung

Southern Enterprises

Southern Enterprises OC877400TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises MS040500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises HO0162A0TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises BC348100TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises MS163200TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises CM0696 Bedienungsanleitung

Southern Enterprises

Southern Enterprises Palmetto Console Table CK556300TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises Antero Hyacinth BC273200TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises MS904500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK622400TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises HZ030500TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises OC9665R0TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises JS701600TX Bedienungsanleitung

Southern Enterprises

Southern Enterprises WS476000TX Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung

Case

Case Matthew Hilton Cross Sideboard Bedienungsanleitung