SOYO SY-6BA+ Gebrauchs- und Pflegehandbuch

SY-6BA

Mainboard

**************************************

Pentium®

II processor (66&100MHz) supported

82440 BX AGP Set Mainboard

ATX Form Factor

**************************************

User's Guide

Technical Reference

SOYO™

SY-6BA

About This Guide

This User's Guide is for assisting system manufacturers and end users in setting up

and installing the mainboard. Information in this guide has been carefully checked for

reliability; however, no guarantee is given as to the correctness of the contents. The

information in this document is subject to change without notice.

by Soyo Computer Inc. You may not reproduce, transmit, transcribe, store in a

retrieval system, or translate into any language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Trademarks

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property

of their owners.

Disclaimer

Soyo Computer Inc. makes no representations or warranties regarding the contents

of this manual. We reserve the right to revise the manual or make changes in the

specifications of the product described within it at any time without notice and without

obligation to notify any person of such revision or change. The information contained

in this manual is provided for general use by our customers. Our customers should be

aware that the personal computer field is the subject of many patents. Our customers

should ensure that their use of our products does not infringe upon any patents. It is

the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and

not to infringe upon or assist others to infringe upon such rights.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause

at 252.277-7013.

Product Rights

Products mentioned in this manual are mentioned for identification purpose only.

Product names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies.

If you need any further information, please come to our home page on the Internet.

The address is "http://www.soyo.com.tw".

Edition: April 1998

Version 1.0

6BA SERIAL

CTested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

POST CONSUMER

RECYCLED PAPER100%

Table of Contents

SY-6BA

Table of Contents

SY-6BA MOTHERBOARD LAYOUT ..........................................................1

MOTHERBOARD FEATURES ....................................................................2

DEFAULT SETTINGS..................................................................................3

QUICK INSTALLATION GUIDE ..................................................................4

CHAPTER 1 INTRODUCTION ...............................................................23

1-1 KEY FEATURES................................................................23

1-2 UNPACKING THE MOTHERBOARD ................................25

1-3 HANDLING THE MOTHERBOARD...................................25

1-4 ELECTROSTATIC DISCHARGE PRECAUTIONS.............25

CHAPTER 2 HARDWARE SETUP.........................................................27

2-1 CMOS CLEAR JUMPER JP5 ............................................27

2-2 AUTO DETECT CPU VOLTAGE & FREQUENCY.............28

2-3 CPU TYPE CONFIGURATION..........................................28

2-4 MEMORY CONFIGURATION............................................30

2-5 MULTI I/O ADDRESSES....................................................31

2-6 MAKING CONNECTIONS .................................................31

CHAPTER 3 BIOS SETUP UTILITY.......................................................32

3-1 STANDARD CMOS SETUP...............................................34

3-2 BIOS FEATURES SETUP..................................................37

3-3 CHIPSET FEATURES SETUP...........................................42

3-4 POWER MANAGEMENT SETUP......................................46

3-5 PNP/PCI CONFIGURATION SETUP.................................50

3-6 LOAD SETUP DEFAULTS.................................................53

3-7 LOAD BIOS DEFAULTS....................................................53

3-8 INTEGRATED PERIPHERALS..........................................54

3-9 SUPERVISOR PASSWORD............................................588

3-10 USER PASSWORD.........................................................599

3-11 IDE HDD AUTO DETECTION .......................................60

APPENDIX QUICK START GUIDE ......................................................611

Motherboard Layout

SY-6BA

SY-6BA MOTHERBOARD LAYOUT

Back Panel Layout with Default Settings

COM 1

COM 2

PRT

USB 1

USB 2

PS/2 KB

Connector

PS/2 Mouse

Connector

Flash BIOS

PCI Slot #1

PCI Slot #2

PCI Slot #3

PCI Slot #4

PCI Slot #5 (Slave)

AGP Port

ISA Slot #1

ISA Slot #2

IR1

JP5

3V Lithium

Battery

Intel®

82443 BX

IO Chipset

CPUFAN PWRFAN

CHAFAN

JP44

1 3

Intel®

82371 EB

SB-LINK™

Processor

Motherboard Features & Default Settings

SY-6BA

MOTHERBOARD FEATURES

Board Size 4-layer PCB, 22.5x30.5cm, ATX Form Factor

Slot 1 Slot 1 for Pentium®

II Processor; supports:

ØPentium®

II Processors up to 100 MHz host bus frequency

(233-500MHz)

ØAuto detection of CPU voltage

Chipset 82440 BX AGP Set

ATX Power 20-pin Male Connector

Memory DIMM Bank 1~4 (D1~D4)

Ø168-pin Unbuffered SDRAM DIMM Module

ØSupport 8~128MB DIMM in each Bank

ØSupports ECC configuration

BIOS System BIOS built-in, Award BIOS

Ø"Plug-and-Play" function

ØNCR810/SY-V325/SY-8115 BIOS Code

PCI Slots (5x) 5 x 32-bit Bus Mastering Slots

AGP Slot (1x) 1 x 32-bit AGP Slot

ISA Slots (2x) 2 x 16-bit ISA Slots

IDE1, IDE2 2 x 40-pin Bus Mastering E-IDE/ATAPI Ports

ØIDE1: Primary IDE Device Connector

ØIDE2: Secondary IDE Device Connector

FDC 1 Floppy Disk Drive (FDD) Port

(Supports 1.2MB/1.44MB/2.88MB and LS120/3-mode FDD)

IR1 5-pin Infrared Device Connector

PRT 1 26-pin Female Parallel Printer Port

COM1, COM2 2 RS-232 Serial Ports

PS/2 KB 1 PS/2 Keyboard Connector

Motherboard Features & Default Settings

SY-6BA

MOTHERBOARD FEATURES (CONTINUED)

PS/2 Mouse 1 PS/2 Mouse Connector

USB1, USB2 2 USB (Universal Serial Bus) Connectors

Keylock 5-pin KeyLock Connector

Reset 2-pin Reset Switch Connector

Speaker 4-pin PC Speaker Connector

TB_LED 2-pin Turbo LED Connector

HDD_LED 2-pin IDE Device LED Connector

JP5 CMOS Clear Jumper

JP44 WOL (Wake-On-LAN) 3-pin Connector

SBLINK PCI Audio Card Connector

DEFAULT SETTINGS

CPU Pentium®

II 233/350 MHz Processor

CPU Voltage Auto Detect CPU Voltage

2 IDE Ports PCI E-IDE Ports

1 Parallel Port LPT1: EPP/ECP Printer Port

ØLPT1: I/O Address 378H, IRQ 7, Status ECP+EPP

2 Serial Ports COM1 & COM2: 2 x RS-232 high-speed

UARTs (w/ 16550 FIFO)

ØCOM1: I/O Address 3F8H, IRQ 4

ØCOM2: I/O Address 2F8H, IRQ 3

2 USB Ports 2 Onboard USB (Universal Serial Bus) Ports

PS/2 Mouse

ATX Power Supply

Quick Installation Guide

SY-6BA

QUICK INSTALLATION GUIDE

Congratulations on your purchase of SY-6BA Motherboard. You

are about to install and connect your motherboard.

Note: Do not unpack the motherboard from its protective

anti-static packaging until you have made the following

preparations.

PREPARATIONS

Gather and prepare all the hardware equipment to complete the

installation successfully:

1. Pentium®

II processor with built-in CPU cooling fan (boxed

type).

Note: This motherboard supports non-boxed type CPUs. The

heavier CPU cooling fan requires the installation of a CPU

support stand included in this motherboard package.

2. DRAM module

3. Computer case and chassis with adequate power supply unit

4. Monitor

5. Keyboard

6. Pointing Device (PS/2 mouse)

7. VGA Card

8. Sound Card (optional)

9. Speaker(s) (optional)

10. Disk Drives: HDD, CD-ROM, Floppy drive…

11. External Peripherals: Printer, Plotter, and Modem (optional)

12. Internet Card (optional)

Quick Installation Guide

SY-6BA

Quick Installation Guide

SY-6BA

UNPACKING THE MOTHERBOARD

Like most electronic equipment, your motherboard may be damaged

by electrostatic discharge. To avoid permanent damage to

components ground yourself while working by using a grounding

strap. Otherwise ground yourself frequently by touching the

unpainted portion of the computer chassis to drain the static

charges.

Handle the motherboard carefully, holding it by the edges.

You are now ready to start the installation.

INSTALLATION GUIDE

We will now begin the installation of the motherboard. Please follow

the step-by-step procedure designed to lead you to a complete and

correct installation.

Step 1. CPU Installation

Your SY-6BA motherboard comes with a CPU retention set kit. The

retention set is used to hold the Pentium®

II processor attached to

the Slot 1 CPU connector on the motherboard.

Follow these instructions to install your Pentium®

II processor

correctly.

1. Unpack the Retention Set Kit

Gather the following items included in the retention set kit, as shown

in the following figure:

θSupporting Base

θSupport Clip

θLatches (x2)

θScrews (x2) used to set the retention clip

θRetention Clip

Quick Installation Guide

SY-6BA

2. Position the Motherboard

Locate Slot 1 on the motherboard and position the board in the

direction as shown in the following figure:

Supporting Base

Support Clip

Screws (x2)

Retention Clip

Latches (x2)

Slot 1

Heat Sink

ATX Power

Andere Handbücher für SY-6BA+

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-7VEM Bedienungsanleitung

SOYO

SOYO SY-5EMM Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4I Fire DRAGON Bedienungsanleitung

SOYO

SOYO SY-D6IBA Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6BE Bedienungsanleitung

SOYO

SOYO SY-6BE Bedienungsanleitung

SOYO

SOYO SY-7IZB+N Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7VBA133U Bedienungsanleitung

SOYO

SOYO SY-6BA+III Bedienungsanleitung

SOYO

SOYO Motherboard SY-6BA+ IV Bedienungsanleitung

SOYO

SOYO 6KF Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-K7V DRAGON Plus Bedienungsanleitung

SOYO

SOYO SY-6ICA Bedienungsanleitung

SOYO

SOYO 5EAS5 Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-K7VEMPRO V1.0 Bedienungsanleitung

SOYO

SOYO SY-7VBA133U Bedienungsanleitung

SOYO

SOYO SY-P4VDA Bedienungsanleitung

SOYO

SOYO SY-TISU Bedienungsanleitung

SOYO

SOYO SY-5EMA+ Bedienungsanleitung

SOYO

SOYO 6KD Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7IZB Bedienungsanleitung

SOYO

SOYO SY-6KL Bedienungsanleitung

SOYO

SOYO SY-6IWM/L Bedienungsanleitung

SOYO

SOYO SY-K7ADA Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung