SOYO SY-7ISA+ Bedienungsanleitung

SY-7ISA

Motherboard

Quick Start Guide

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

Sigmatel Audio

Driver

Installation

Intel 815 VGA

Drivers

Installation

SOYO™

SY-7ISA Motherboard

Pentium

III processors

Intel FW82815 AGP/PCI/CNR Motherboard

66/100/133 MHz Front Side Bus supported

ATX Form Factor

Trademarks:

Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of

their owners.

Product Rights:

All names of the product and corporate mentioned in this publication are used for identification

purposes only. The registered trademarks and copyrights belong to their respective companies.

manual may be reproduced, transmitted, transcribed, translated into any other language, or

stored in a retrieval system, in any form or by any means, such as by electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without permission in writing from Soyo

Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to amend the manual or revise the specifications of the product

described in it from time to time without obligation to notify any person of such revision or

amend. The information contained in this manual is provided to our customers for general use.

Customers should be aware that the personal computer field is subject to many patents. All of

our customers should ensure that their use of our products does not infringe upon any patents. It

is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to

infringe upon or to cause others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide can help system manufacturers and end users in setting up and installing

the Motherboard. Information in this guide has been carefully checked for reliability; however,

to the correctness of the contents there is no guarantee given. The information in this document

is subject to amend without notice.

For further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

7ISA Serial - Version 1.0 - Edition: September 2000

*Thesespecificationsaresubjecttoamendwithoutnotice

SY-7ISA

Quick Start Guide

Introduction

Congratulationsonyourpurchaseofthe

SY-7ISA

Motherboard.ThisQuickStart Guide

illustratesthestepsforinstallingandsettingupyournewMotherboard.

ThisguideprovidesalluserswiththebasicstepsofMotherboardsettingandoperation.For

furtherinformation,pleaserefertothe SY-7ISAMotherboardUses’Guidethatcamewith

yourMotherboard.

Unpacking

WhenunpackingtheMotherboard,checkforthefollowingitems:

TheSY-7ISAFW82815AGP/PCI/CNRMotherboard

ThisQuickStartGuide

TheInstallationCD-ROM

SOYOBonusPackCD-ROM

OneIDEDeviceATA100FlatCable

OneFloppyDiskDriveFlatCable

SY-7ISA Quick Start Guide

Introduction

SY-7ISA Motherboard Layout

(Optional)

USB 1

USB 2

PS/2 KB

Connector

PS/2 MousePS/2 Mouse

Connector

Lithium

Battery

IDE 1

IDE 2

ATX Power

LINE-OUT

LINE-IN

MIC JACK

JOYSTICK

VGA

PCI#6

PCI#5

PCI#4

PCI#3

PCI#1

PCI#2

Intel

CPUFAN

PRT

COM A

AGP Slot

JP8

JP1

JP6

JP7

CJ2

CJ1

CDIN1

CNR1

SMCARDCN

SYSFAN

SIRCON

ITE

IT8712F-A

LED1

LED2

LED3

LED4

DIMM1

DIMM2

DIMM3

USB3_4

LED5

Power

LED

Keylock

Speaker

STR

LED

HDD

LED

PWRBT

Reset

WOL

Header

CMOS Clear

Jumper

FDC1

JP10

JP5

JP22

JP9

Sigmatel

STAC9721

SY-7ISA

Quick Start Guide

Introduction

Key Features

SupportsIntel®FC-PGAprocessors

-FSB66MHz:Celeron



(533A-

700MHz)

-FSB100MHz:Pentium®III(500E-

850MHz)

-FSB133MHz:Pentium®III(533-

933MHz)

Supports66/100/133MHzFrontSide

BusFrequency

Auto-detectCPUvoltage

PC99,ACPI

UltraDMA33/66100(ATA33/66/100)

SupportsWake-On-LAN (WOL)

SupportPC-100andPC-133SDRAM

SupportsACPISuspendIndicator

Power-onbymodem,alarmandPS/2

Keyboard

Powerfailureresume

SupportsSuspendtoRAM

Supportsonboardhardwaremonitoring

andincludesHardwareDoctor™utility

Fanspeedcontrol

EasyCPUsettingsinBIOSwiththe

“SOYOCOMBOSetup”

Supportdisplaycacheinterface(AIMM

card)multiplexedontheAGPinterface

-133MHzSDRAMinterfaceonly

-4MBmaxaddressable

BatteryLowvoltageDetect

Supportsmultiple-bootfunction

AGP2.0Compliant;

AGPUniversalConnectorsupports:

-1.5Vand3.3VAGPcards

-1X/2X/4Xdatatransfer

SupportsCommunicationNetworking

RiserSlot(CNR1.0compliant)*

SmartCardReader

-CompliantwithPersonalComputer

SmartCard

¡]

PC/SC

¡^

WorkingGroup

standard

-Compliantwithsmartcard

¡]

ISO7816

¡^

protocols

-Supportscardpresentdetect

-SupportsSmartCardinsertionpower-

onfeature

3xDIMMslotsforSDRAMmemory

1x32-bitAGPslot

6x32-bitbusmasterPCIslots

4xUSBportsonboard

1xIrDAport

ATXpowerconnector

*IftheuserwantstouseaModemRisercard(MR)makesuretousea

Secondary

modeMR,

PRIMARY

modeMRs are

NOT

Supported.

SY-7ISA Quick Start Guide

Hardware

Installation

ToavoiddamagetoyourMotherboard,pleasefollowthesesimpleruleswhile

handlingthisequipment:

BeforehandlingtheMotherboard,groundyourselfbytouchingontoanunpainted

portionofthesystem'smetalchassis.

RemovetheMotherboardfromitsanti-staticpackaging.Holdthemotherboardbythe

edgesandavoidtouchingitscomponents.

ChecktheMotherboardfordamage.Ifanychipappearstobeloose,presscarefully

toseatitfirmlyinitssocket.

Followthedirectionsinthissectionwhichisdesignedtoguideyouthroughaquickand

correctmethodtoinstallyournew

SY-7ISA

Motherboard.Fordetailedinformation,please

refertotheSY-7ISAMotherboard User'sguideandTechnicalReference onlinemanualonin

theCD-ROMpackagethatcamewithyourMotherboard.

Gatherandprepareallnecessarycomponentstocompletetheinstallationsuccessfully:

Socket370processorwithbuilt-inCPUcoolingfan(boxedtype)

SDRAMmodule(s)

Computercasewithadequatepowersupplyunit

Monitor

PS/2Keyboard

PointingDevice(PS/2Mouse)

Speaker(s)(optional)

DiskDrives:HDD,CD-ROM,Floppydrive…

ExternalPeripherals:Printer,Plotter,andModem(optional)

InternalPeripherals:ModemandLANcards(optional)

Note:

Ifyouwanttouseanexternalspeakerconnectedto"Line-out"port,pleasemake

suretousean"amplifiedspeaker"thatcangenerateproperoutputsoundvolume.

SY-7ISA

Quick Start Guide

Hardware

Installation

Install the Motherboard

Followthestepsbelowinordertoperformtheinstallationofyournew

SY-7ISA

Motherboard.

Step 1. Install the CPU

Mark your CPU Frequency:

RecordtheworkingfrequencyofyourFC-

PGACPUthatshouldbeclearlymarkedontheCPUcover.

FSB66MHz

400MHz(66x6.0) 466MHz(66x7.0) 533MHz(66x8.0) 600MHz(66x9.0) 667MHz(66x10.0)

433MHz(66x6.5) 500MHz(66x7.5) 566MHz(66x8.5) 633MHz(66x9.5) 700MHz(66x10.5)

FSB100MHz

500MHz(100x5.0) 600MHz(100x6.0) 700MHz(100x7.0) 800MHz(100x8.0)

550MHz(100x5.5) 650MHz(100x6.5) 750MHz(100x7.5) 850MHz(100x8.5)

FSB133MHz

533MHz(133x4.0) 667MHz(133x5.0) 800MHz(133x6.0) 933MHz(133x7.0)

600MHz(133x4.5) 733MHz(133x5.5) 866MHz(133x6.5)

CPU Mount Procedure:

TomountthePentium® & Celeron

processorthatyou

havepurchasedseparately,followtheseinstructions.

Liftthesockethandleuptoaverticalposition.

AlignthebluntedgeoftheCPUwiththematchingpinholeedgeonthesocket.

Seattheprocessorinthesocketcompletelyandwithoutforcing.

ThenclosethesockethandletosecuretheCPUinplace.

RemembertoconnecttheCPUCoolingFantotheappropriatepower

connectorontheMotherboard. Thefanis akeycomponentthatstabilizesthe

system.Itpreventstheequipmentfromoverheatingandprolongsthelifeof

yourCPU.

SY-7ISA Quick Start Guide

Hardware

Installation

Step 2. Connections to the Motherboard

ThissectiontellshowtoconnectinternalperipheralsandthepowersupplytotheMotherboard.

TheinternalperipheralsconsistofIDEdevices(HDD,CD-ROM),FloppyDiskDrive,Chassis

Fan,FrontPanelDevices(STRLED,InternalSpeaker,ResetButton,IDE LED,and

KeyLockSwitch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.

FormoredetailsonconnectinginternalandexternalperipheralstoyournewSY-7ISA

Motherboard,pleasereferto SY-7ISAMotherboardUser'sGuideandTechnicalReference

onlinemanualontheCD-ROM.

Connectors and Plug-ins

CPUCoolingFan: CPUFAN Chassis Fan:CHAFAN Wake-On-LANHeader:JP10

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

GND 12V SENSOR GND 12V SENSOR 5VSB GND MP-Wakeup

StandardIrDA(Infrared Device Header):SIRCON SystemFan:SYSFAN

Pin1 Pin2 Pin3 Pin4

Pin5

Pin1 Pin2 Pin3

VCC None IRRX GND IRTX GND 12V SENSOR

USB3 USB4

Pin1 Pin2 Pin3 Pin4 Pin1 Pin2 Pin3 Pin4 Pin5

Power Data(-) Data(+) GND Power Data(-) Data(+) GND GND

SMCARDCN

Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14

VCC NC NC NC Scrfet RST CLK NC NC Scrio GND Scrpres NC NC

Pin1 Pin2 Pin3 Pin4

CD-IN:CDIN1

ConnecttoyourCD-ROMaudiooutput.

LGND GND R

PowerLED KeyLock

Pin1 Pin2 Pin3

Pin1 Pin2

5V NC

GND

ControlPin GND

Speaker

Pin1 Pin2 Pin3 Pin4

5V NC NC Speakerout

HDDLED STRLED PWRBT RESET

Pin1 Pin2 Pin1 Pin2 Pin1

Pin2

Pin1

Pin2

LEDAnode LEDCathode LEDAnode LEDCathode PowerOn/Off GND PowerGood GND

ATXPowerOn/Off: PWRBT

Connectyourpowerswitchtothisheader(momentaryswitchtype).

Toturnoff thesystem,pressthisswitch and holddownforlongerthan 4seconds.

ATXPowerSupply:ATXPW

AttachtheATXPowercabletothisconnector.(ThismotherboardrequiresanATXpowersupply,anATpower

supplycanNOTbeused.)

WhenusingthePower-OnbyPS/2Keyboardfunction,pleasemakesuretheATXpowersupplyisabletoprovide

atleast720mAonthe5VStandbylead(5VSB).

Speaker

Reset

PWRBT

Power LED

HDD LEDSTR LED

Key Lock

SY-7ISA

Quick Start Guide

Hardware

Installation

Step 3. 5V Stand-by indicator LED (LED 5)

ThisLEDislitwheneverthe5VStandbyvoltagecomingfromtheATX powersupplyis

available.IfyouhaveconnectedyourATX powersupplytothemains,LED5 shouldbelit.

Step 4. Configure Memory

YourboardcomeswithtwoDIMMsockets,providingsupportforupto512MBofmain

memoryusingunbufferedandNon-ECCDIMMmodulesfrom32MBto512MB,No

reqisteredDIMMsupport.

Supportsupto 3Double sided DIMMsat 100MHz system

memory. Supportsup to 2double sidedor 3single sided DIMMsa133MHzsystem

memorybus.

Onthismotherboard,DRAMspeedcanbesetindependentfromthe CPU

frontsidebusspeed. DependingontheDRAMclockspeedsettingintheBIOSsetup.

Memory Configuration Table

Number of Memory

Modules DIMM 1 DIMM 2 DIMM 3

Single-Side PC100/PC133 PC100/PC133 PC100/PC133

PC100 PC100 P100

PC133 PC133

RAM

Type Double-Side

PC133 PC133

Memory Module Size (MB) 32/64/128/256/512 MB

Step 5. Enable/Disable Power-On by Keyboard (JP1)

YoumaychoosetoenablethePower-OnthroughKeyboardfunctionbyshortingpin1-2on

jumperJP1;orshortpin2-3todisablethisfunction.

Power-On by

Keyboard Enable Disable

JP1 Setting

Short pin 1-2 to

enable the Power-

On by Keyboard

function.

Short pin 2-3 and

the Power-On by

Keyboard function is

disabled.

Important: When using the Power-On by Keyboard function, please make sure the

ATX power supply is able to provide at least 720mA on the 5V Standby lead (5VSB)

in order to meet the standard ATX specification.

SY-7ISA Quick Start Guide

Hardware

Installation

Step 6. CNR MR Card-CODEC OPTION (JP8)

CNR MR Card-CODEC

OPTION Primary Secondary

JP8 Setting open JP8 short JP8

Step 7. Set JP9 for FWH Boot Block Write-Protect

SettingthisjumpertoopenwillpreventthebootblockareaoftheFWH(FirmWareHub)chip

frombeingwrittendataintosuchthatitiswrite-protectedfromunwantedorabnormalwrite

activity.

Note

:Insomerarecases,thebootblockareawillneedto beflashedtocompletetheBIOS

upgradeprocedure.SettingJP9toopenwillcauseincompleteBIOSupdateinthatcase.

The FWH Boot Block

Write-Protect Locked Unlocked

JP9 Setting open JP9 short JP9

Step 8. SPEAKER OPTION (JP22)

Throughthisjumperthecasespeakeroutputcanbe redirectedtotheexternal(amplified)

speakers(ifconnected)throughtheon-boardAudio-Codec.

SPEAKER OPTION Lineout SPK CASE SPK

JP22 Setting Short pin 1-2 Short pin 2-3

Andere Handbücher für SY-7ISA+

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-6BB Bedienungsanleitung

SOYO

SOYO 82430 TX P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6VBA 133 Bedienungsanleitung

SOYO

SOYO SY-K7V DRAGON Plus Bedienungsanleitung

SOYO

SOYO SY-7VBA133U Bedienungsanleitung

SOYO

SOYO SY-P4I845PE Bedienungsanleitung

SOYO

SOYO SY-5EH5/5EHM V1.2 Super 7 Bedienungsanleitung

SOYO

SOYO Super 7 SY-5EMA Bedienungsanleitung

SOYO

SOYO SY-KT400 Dragon Ultra Bedienungsanleitung

SOYO

SOYO SY-6BA+ Bedienungsanleitung

SOYO

SOYO SY-KT600 DRAGON Plus Bedienungsanleitung

SOYO

SOYO SY-6BA+III Bedienungsanleitung

SOYO

SOYO 486 PCI/VESA Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-TISU Bedienungsanleitung

SOYO

SOYO SY-7VCA-E Bedienungsanleitung

SOYO

SOYO SY-6BA+ III Gebrauchs- und Pflegehandbuch

SOYO

SOYO 82430 TX P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-KT880 DRAGON 2 Bedienungsanleitung

SOYO

SOYO SY-7VEM Bedienungsanleitung

SOYO

SOYO SY-7IS2 Bedienungsanleitung

SOYO

SOYO DRAGON Lite SY-KT333 Bedienungsanleitung

SOYO

SOYO SY-7SBB Bedienungsanleitung

SOYO

SOYO SY-7IWM-X Bedienungsanleitung

SOYO

SOYO SY-7VEM Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung