SOYO SY-P4VSA Bedienungsanleitung

SY-P4VSA

Motherboard

Quick Start Guide

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-P4VSA Motherboard

mPGA Socket 478 processors

VIA P4X266 AGP/PCI Motherboard

400 MHz Front Side Bus supported

ATX Form Factor

Trademarks:

Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of

their owners.

Product Rights:

All names of the product and corporate mentioned in this publication are used for identification

purposes only. The registered trademarks and copyrights belong to their respective companies.

manual may be reproduced, transmitted, transcribed, translated into any other language, or

stored in a retrieval system, in any form or by any means, such as by electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without permission in writing from Soyo

Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to amend the manual or revise the specifications of the product

described in it from time to time without obligation to notify any person of such revision or

amend. The information contained in this manual is provided to our customers for general use.

Customers should be aware that the personal computer field is subject to many patents. All of

our customers should ensure that their use of our products does not infringe upon any patents. It

is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to

infringe upon or to cause others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide can help system manufacturers and end users in setting up and installing

the Motherboard. Information in this guide has been carefully checked for reliability; however,

to the correctness of the contents there is no guarantee given. The information in this document

is subject to amend without notice.

For further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

P4VSA Serial - Version 1.2 - Edition: December 2001

* These specifications are subject to amend without notice

SY-P4VSA

Quick Start Guide

Introduction

Congratulations on your purchase of the

SY-P4VSA

Motherboard. This Quick Start Guide

illustrates the steps for installing and setting up your new Motherboard.

This guide provides all users with the basic steps of Motherboard setting and operation. For

further information, please refer to the SY-P4VSA Motherboard User's Manual that came

with your Motherboard.

Unpacking

When unpacking the Motherboard, check for the following items:



The SY-P4VSA VIA P4X266 AGP/PCI Motherboard



This Quick Start Guide



The Installation CD-ROM



SOYO Bonus Pack CD-ROM



One IDE Device ATA 100 Flat Cable



One Floppy Disk Drive Flat Cable



One Heat Sink Compound

SY-P4VSA Quick Start Guide

Introduction

SY-P4VSA Motherboard Layout

(Optional)

USB 1 USB 2

PS/2 KB

Connector

PS/2 Mouse

Connector

Lithium

Battery

IDE 2IDE 1

ATX Powe r

PCI#5

PCI#4

PCI#3

PCI#1

PCI#2

PRT

COM A

COM B

ITE

IT8705F

DIMM1

DIMM2

DIMM3

SMCARDCN

SIRCON USB3_4 USB5_6

10 10

FDC

WOL

Header

JP10

CMOS Clear

Jumper

JP5

CDIN

AOUT

AIN

AMIC

AGAME

ONBOARD

AU DI O

Power

LED

Keylock

Speaker

HDD

LED

PWRBT

Reset

J25

J29

AGP Slot

SDRAM

□

T8753

SY-P4VSA

Quick Start Guide

Introduction

Key Features



Supports Intel

mPGA Socket 478

processors

- Pentium



Supports 400 MHz Front Side Bus

Frequency



PC99, ACPI



Ultra 33/66/100 (ATA 33/66/100)



Supports Wake-On-LAN (WOL)



Supports PC-133 SDRAM



Supports ACPI Suspend Indicator



Power-on by modem, alarm and PS/2

Keyboard



Power failure resume



Supports Suspend to RAM



Supports onboard hardware monitoring

and includes Hardware Doctor™ utility



Supports AC97 Codec



Easy CPU settings in BIOS with the

“SOYO COMBO Setup”

- CPU voltage adjust

- CPU ratio adjust

- CPU FSB adjust



Supports multiple-boot function



AGP 2.0 Compliant;

AGP Connector supports:

- 1X/2X/4X data transfer



Smart Card Reader

- Compliant with Personal Computer

Smart Card (PC/SC) Working Group

standard

- Compliant with smart card (ISO 7816)

protocols

- Supports card present detect

- Supports Smart Card insertion

power-on feature



3 x DIMM slots for SDRAM memory



1 x 32-bit AGP slot



5 x 32-bit bus master PCI slots



6 x USB ports onboard



1 x IrDA port



ATX 12V power connector

SY-P4VSA Quick Start Guide

Hardware

Installation

To avoid damage to your Motherboard, please follow these simple rules while

handling this equipment:



Before handling the Motherboard, ground yourself by touching on to an unpainted

portion of the system's metal chassis.



Remove the Motherboard from its anti-static packaging. Hold the motherboard by the

edges and avoid touching its components.



Check the Motherboard for damage. If any chip appears to be loose, press carefully

to seat it firmly in its socket.

Follow the directions in this section which is designed to guide you through a quick and

correct method to install your new

SY-P4VSA

Motherboard. For detailed information, please

refer to the SY-P4VSA Motherboard User's Manual and Technical Reference online manual

on the CD-ROM that came with your Motherboard.

Gather and prepare all necessary components to complete the installation successfully:



Socket mPGA 478 processor with built-in CPU cooling fan (boxed type)



SDRAM module (s)



Computer case with adequate power supply unit



Monitor



PS/2 Keyboard



Pointing Device (PS/2 Mouse)



Speaker(s) (optional)



Disk Drives: HDD, CD-ROM, Floppy drive…



External Peripherals: Printer, Plotter, and Modem (optional)



Internal Peripherals: Modem and LAN cards (optional)



VGA Card (AGP, PCI)

SY-P4VSA

Quick Start Guide

Hardware

Installation

Install the Motherboard

Follow the steps below in order to perform the installation of your new

SY-P4VSA

Motherboard.

Step 1. Install the CPU

Mark your CPU Frequency:

Record the working frequency of your mPGA

CPU that should be clearly marked on the CPU cover.

FSB 400MHz

1.5GHz (100 x 15.0 ) 1.6GHz (100 x 16.0) 1.7GHz ( 100 x 17.0) 1.8GHz (100 x 18.0)

1.9GHz (100 x 19.0 ) 2.0GHz (100 x 20.0) 2.2GHz (100 x 22.0)

CPU Mount Procedure:

To mount the Pentium

4 Socket mPGA478 processor

that you have purchased separately, follow these instructions.

1. Lift the socket handle up to a vertical position.

2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.

3. Seat the processor in the socket completely and without forcing.

4. Then close the socket handle to secure the CPU in place.

Remember to connect the CPU Cooling Fan to the appropriate power

connector on the Motherboard. The fan is a key component that stabilizes the

system. It prevents the equipment from overheating and prolongs the life of

your CPU.

SY-P4VSA Quick Start Guide

Hardware

Installation

Step 2. Connections to the Motherboard

This section tells how to connect internal peripherals and the power supply to the Motherboard.

The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive,

Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED,

and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on connecting internal and external peripherals to your new SY-P4VSA

Motherboard, please refer to SY-P4VSA Motherboard User's Manual and Technical

Reference online manual on the CD-ROM.

Connectors and Plug-ins

CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN1 Chassis Fan: CHAFAN2 Front Panel Audio :J29

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin4

GND 12V SENSOR

GND 12V None

Aout-L Aout-R

Mic in GND

Standard IrDA (Infrared Device Header): SIRCON Wake-On-LAN Header: JP10

Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3

VCC NC IRRX GND IRTX 5VSB GND MP-Wakeup

USB 3 USB 4

Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10

5VSB Data(-) Data(+) GND NC 5VSB Data(-) Data(+) GND GND

USB 5 USB 6

Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10

5VSB Data(-) Data(+) GND NC 5VSB Data(-) Data(+) GND GND

SMCARDCN

Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14

VCC NC NC NC Scrfet RST CLK NC NC Scrio GND Scrpres NC NC

CD -IN: CDIN Pin1 Pin2 Pin3 Pin4

Connect the CD Line-in cord from the CR-ROM device to the

matching connector CDIN

L G G R

Power LED Key Lock

Pin1 Pin2 Pin3

Pin1 Pin2

VCC NC GND

Control Pin GND

Speaker

Pin1 Pin2 Pin3 Pin4

VCC NC NC Speaker out

HDD LED PWRBT RESET

Pin1 Pin2 Pin1 Pin2 Pin1 Pin2

LED Anode LED Cathode Power On/Off GND Power Good GND

Power On/Off: PWRBT

Connect your power switch to this header (momentary switch type).

To turn off the system, press this switch and hold down for longer than 4 seconds.

Power LED Key Lock Speaker

Reset PWRBT ACPI LED HDD LED

SY-P4VSA

Quick Start Guide

Hardware

Installation

ATX 12V Power Supply: ATX PW

Attach the ATX 12V Power cable to three connector. (This motherboard requires an ATX 12V power supply, an

AT and ATX power supply can NOT be used.)

When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to

provide at least 720mA on the 5V Standby lead (5VSB).

It is recommended that an Intel Pentium 4 processor-based PC be powered by at least a 250 watt ATX 12V

power supply.

PS. Power supply must be use ATX 12V specification.

A new superset of the original ATX power supply is now defined. Named “ATX 12V,” this new

power supply is comprised of a standard ATX unit plus the following enhancements:



Increased +12 VDC output capability. Mother board components with unique voltage

requirements are increasingly expected to be powered via DC/DC converters off the

+12 VDC power supply output. This trend is due primarily to the higher power

conversion and transmission efficiencies of +12 VDC relative to +5 VDC or +3.3 VDC.

ATX12V power supplies should be designed to accommodate these increased +12

VDC current requirements and to address associated issues such as cross-regulation,

capacitive loading, transient surge tolerance, cable voltage drop, and cooling.



New +12 V power connector. To enable the delivery of more +12 VDC current to the

motherboard, a new 4-pin receptacle/header combination--the + 12 V power

connector–has been defined.

The presence of the +12 V power connector

indicates that a power supply is ATX12V; the absence of the +12 V power

connector indicates that a supply is ATX.

Step 3. Configure Memory

Directly supports one SDR SDRAM channel, 64b wide, providing support max of

3 Double-Sided DIMMs with unbuffered PC133.

The largest memory capacity

possible is 3GB.

On this motherboard, DRAM speed can be set independent

from the CPU front side bus speed. Depending on the DRAM clock speed setting

in the BIOS setup.

Memory Configuration Table

Number of Memory Modules DIMM 1 DIMM 2 DIMM 3

RAM Type SDRAM

Memory Module Size (MB) 32/64/128/256/512 MB/ 1 GB

SY-P4VSA Quick Start Guide

Hardware

Installation

CMOS Clear (JP5)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear

the CMOS memory.

1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper

can be easily identified by its white colored cap.

2. Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.

CMOS Clearing Clear CMOS Data Retain CMOS Data

JP5 Setting

Short pin 2-3 for

at least 5 seconds to

clear the CMOS

Short pin 1-2 to

retain new

settings

Note: You must unplug the ATX 12V power cable from the ATX 12V power

connector when performing the CMOS Clear operation.

12 3

123

Andere Handbücher für SY-P4VSA

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-P4ISR Bedienungsanleitung

SOYO

SOYO DRAGON 2 Motherboard 2 Bedienungsanleitung

SOYO

SOYO SY-7IWM-X Bedienungsanleitung

SOYO

SOYO SY-P4S DRAGON Ultra Bedienungsanleitung

SOYO

SOYO SY-P4I845GV Bedienungsanleitung

SOYO

SOYO SY-7VBA133U Bedienungsanleitung

SOYO

SOYO SY-V6BE+ Bedienungsanleitung

SOYO

SOYO 6KB 82440 LX Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6IWM Bedienungsanleitung

SOYO

SOYO SY-7VMA-B Bedienungsanleitung

SOYO

SOYO SY-7VCA Bedienungsanleitung

SOYO

SOYO LI-7000 Bedienungsanleitung

SOYO

SOYO SY-6BA+III Bedienungsanleitung

SOYO

SOYO SY-K7AIA Bedienungsanleitung

SOYO

SOYO 82440 FX Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7VDA Bedienungsanleitung

SOYO

SOYO SY-K7VTA PRO Bedienungsanleitung

SOYO

SOYO 5XBE5 Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6IEB Bedienungsanleitung

SOYO

SOYO SY-P4-645DX DRAGON Ultra Bedienungsanleitung

SOYO

SOYO SC-6TBxE Bedienungsanleitung

SOYO

SOYO 82430 HX / P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-K7VTA PRO Bedienungsanleitung

SOYO

SOYO SY-7SBB Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung