SOYO SY-V6BE+ Bedienungsanleitung

SY-V6BE+

Mainboard

****************************************************

Pentium®

II Processor supported

AGP/PCI Mainboard

66&100MHz Front Side Bus supported

ATX Form Factor

****************************************************

User's Guide

Technical Reference

SOYO™SY-V6BE+

About This Guide

This User's Guide is for assisting system manufacturers and end users in setting up

and installing the mainboard. Information in this guide has been carefully checked for

reliability; however, no guarantee is given as to the correctness of the contents. The

information in this document is subject to change without notice.

by Soyo Computer Inc. You may not reproduce, transmit, transcribe, store in a

retrieval system, or translate into any language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Trademarks

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property

of their owners.

Disclaimer

Soyo Computer Inc. makes no representations or warranties regarding the contents

of this manual. We reserve the right to revise the manual or make changes in the

specifications of the product described within it at any time without notice and without

obligation to notify any person of such revision or change. The information contained

in this manual is provided for general use by our customers. Our customers should be

aware that the personal computer field is the subject of many patents. Our customers

should ensure that their use of our products does not infringe upon any patents. It is

the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and

not to infringe upon or assist others to infringe upon such rights.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause

at 252.277-7013.

Product Rights

Products mentioned in this manual are mentioned for identification purpose only.

Product names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies.

If you need any further information, please come to our home page on the Internet.

The address is "http://www.soyo.com.tw".

Edition: December 1998

Version 1.1

SY-V6BE+ SERIAL

CTested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

POST CONSUMER

RECYCLED PAPER

100%

Table of Contents SY-V6BE+

iii

Table of Contents

SY-V6BE+ MAINBOARD LAYOUT ...............................................1

CHAPTER 1 INTRODUCTION .....................................................2

1-1 KEY FEATURES......................................................2

1-2 HANDLING THE MAINBOARD................................5

1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS....5

CHAPTER 2 HARDWARE SETUP...............................................6

2-1 PREPARATIONS .....................................................6

2-2 UNPACKING THE MAINBOARD..............................7

2-3 INSTALLATION GUIDE............................................7

CHAPTER 3 BIOS SETUP UTILITY...........................................30

3-1 SOYO COMBO SETUP .........................................32

3-2 STANDARD CMOS SETUP ...................................38

3-3 BIOS FEATURES SETUP......................................41

3-4 CHIPSET FEATURES SETUP...............................46

3-5 POWER MANAGEMENT SETUP...........................49

3-6 PNP/PCI CONFIGURATION SETUP......................53

3-7 LOAD SETUP DEFAULTS .....................................56

3-8 INTEGRATED PERIPHERALS...............................57

3-9 SUPERVISOR PASSWORD ..................................61

3-10 USER PASSWORD ...............................................62

3-11 IDE HDD AUTO DETECTION................................63

CHAPTER 4 DRIVERS INSTALLATION......................................64

Mainboard Features SY-V6BE+

SY-V6BE+ MAINBOARD LAYOUT

Back Panel SY-V6BE+ Platform

COM 1

COM 2

PRT

USB 1USB 2

PS/2 KB

Connector

PS/2 Mouse

Connector

JP10

PCI Slot #1

PCI Slot #2

PCI Slot #3

PCI Slot #4

ISA Slot #2

ISA Slot #1

ISA Slot #3

JP5

JP44

IR1

CPUFAN

Ultra

I/O Chipset

CHAFAN

IDE 1

IDE 2

FDC

Slot 1 for

Pentium

IIProcessor

AGP Slot

ATX

Power

DIMM 1

DIMM 2

DIMM 3

Speaker

Keylock

Power

LED

Reset

PWRBT

Turbo

LED

HDD LED

Wake on

LAN

Hardware

Monitoring

Winbond

W83781D

SW1

3V Lithium

Battery

BIOS Flash

Introduction SY-V6BE+

Chapter 1

INTRODUCTION

The SY-V6BE+ AGP/PCI mainboard is a high-performance

Pentium®

II processor supported ATX form-factor system board.

SY-V6BE+ uses the VIA Chipset technology and supports Pentium®

II class processors. This mainboard is fully compatible with industry

standards and adds many technical enhancements.

1-1 KEY FEATURES

Supports Intel Pentium® II processor (233-500MHz) & CeleronTM

processor (266~400 MHz)

Auto-detect CPU voltage

PC98, ACPI, Ultra DMA/33

Supports system memory up to 768 MBytes

Power-on by modem or alarm

Supports Wake-On-LAN (WOL)

Supports power-on by keyboard

Supports onboard hardware monitoring (optional)

and includes Hardware Doctor™utility

1 x 32-bit AGP slot

4 x 32-bit bus mastering PCI slots

2 x USB ports onboard

1 x IrDA port

Supports multiple-boot function

DMI utility

SOYO COMBO Setup

Introduction SY-V6BE+

SY-V6BE+ PLATFORM FEATURES

Board Size 4-layer PCB, 18x30.5cm(7.1”x12”), ATX Form

Factor

Slot1 Slot 1 for Pentium®

II Processor

ØSupports the following processors

u100MHz FSB

Pentium®

II 350/400/450/500* MHz

u66MHz FSB

Pentium®

II 233/266/300/333 MHz

Celeron300A/333/366/400* MHz

Celeron266/300 MHz

ØSupports both boxed and non-boxed type of CPUs

ØIncludes a CPU mount kit with retention clip

ØAlso includes a CPU Heat Sink support stand used

for heavier non-boxed type CPUs

ØFeatures Auto-detection of CPU voltage

*This main board is designed to be able to support up to 500/400

MHz processors. However, the 500/400MHz processors are not

available yet at this moment for testing.

Chipset VIA AGP Set

ATX Power 20-pin Male Connector

CPUFAN 3-pin CPU Cooling Fan Connector

Memory DIMM Bank (DIMM1~3)

ØThree strips of 168-pin Unbuffered or Registered

SDRAM DIMM

ØSupports 8/16/32/64/128/256MB DIMM modules in

each bank

ØProvides up to 768 MBytes of main memory

ØSupports ECC configuration

BIOS System BIOS built-in, Award BIOS

ØAPM, ACPI and "Plug-and-Play" function

ØSupports multiple-boot function

ØOnboard FLASH memory for easy upgrade

ØDMI utility

Bus Controller Compliant with v2.1 PCI specifications

Introduction SY-V6BE+

PCI Slots 4 x 32-bit Bus Mastering Slots

AGP Slot 1 x 32-bit AGP Slot

ISA Slots 3 x 16-bit ISA Slots

IDE1, IDE2 2 x 40-pin Bus Mastering E-IDE/ATAPI Ports

ØIDE1: Primary IDE Device Connector

ØIDE2: Secondary IDE Device Connector

ØSupports Ultra DMA/33MHz

FDC 1 Floppy Disk Drive (FDD) Port

(Supports 1.2MB/1.44MB/2.88MB and LS120/3-mode FDD)

IR1 5-pin Serial Infrared Device Header

Keylock 5-pin KeyLock Header

Reset 2-pin Reset Switch Header

Speaker 4-pin PC Speaker Header

TB_LED 2-pin Turbo LED Header

HDD_LED 2-pin IDE Device LED Header

PWRBT ATX Power On/Off Switch 2-pin Header

JP5 CMOS Clear Jumper

JP10 Power On by Keyboard Jumper

JP44 WOL (Wake-On-LAN) 3-pin Header

SW1 Power up FSB clock and AGP bus clock setting

SY-V6BE+ BACK-PANEL FEATURES

PRT 1 x Onboard 26-pin Female Parallel Printer Port

ØECP/EPP/SPP multi-mode parallel printer port

COM1, COM2 2 x Onboard RS-232 Serial Ports

ØFeature 2 x high-speed UARTs (with 16550 FIFO)

PS/2 KB 1 x Onboard PS/2 Keyboard Port

PS/2 Mouse 1 x Onboard PS/2 Mouse Port

USB1, USB2 2 x Onboard USB

(Universal Serial Bus)

Ports

Introduction SY-V6BE+

1-2 HANDLING THE MAINBOARD

To avoid damage to your mainboard, follow these simple rules while

unpacking:

ØBefore handling the mainboard, ground yourself by grasping an

unpainted portion of the system's metal chassis.

ØRemove the mainboard from its anti-static packaging. Hold the

mainboard by the edges and avoid touching its components.

ØCheck the mainboard for damage. If any chip appears loose,

press carefully to seat it firmly in its socket.

Warning: Do not apply power if the mainboard appears

damaged. If there is damage to the board, contact your

dealer immediately.

1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS

Make sure to ground yourself before handling the mainboard or

other system components. Electrostatic discharge can easily

damage the components. Note that you must take special

precautions when handling the mainboard in dry or air-conditioned

environment.

To protect your equipment from electrostatic discharge, take the

following precautions:

ØDo not remove the anti-static packaging until you are ready to

install.

ØGround yourself before removing any system component from its

protective anti-static packaging. (To ground yourself, grasp the

expansion slot covers or other unpainted portions of the computer

chassis.)

ØFrequently ground yourself while working or use a grounding strap.

ØHandle the mainboard by its edges and avoid touching its

components.

Hardware Setup SY-V6BE+

Chapter 2

HARDWARE SETUP

Congratulations on your purchase of SY-V6BE+ Mainboard. You are

about to install and connect your new mainboard.

Note: Do not unpack the mainboard from its protective

anti-static packaging until you have made the following

preparations.

2-1 PREPARATIONS

Gather and prepare all the following hardware equipment to

complete the installation successfully:

1. Pentium®

II processor with built-in CPU cooling fan (boxed

type).

Note: This mainboard supports non-boxed type CPUs. The

heavier CPU cooling fan requires the installation of a CPU

support stand included in this mainboard package.

2. DIMM memory module

3. Computer case and chassis with adequate power supply unit

4. Monitor

5. PS/2 Keyboard

6. Pointing Device (PS/2 mouse)

7. Speaker(s) (optional)

8. Disk Drives: HDD, CD-ROM, Floppy drive…

9. External Peripherals: Printer, Plotter, and Modem (optional)

10. Internal Peripherals: Modem and LAN cards (optional)

Hardware Setup SY-V6BE+

2-2 UNPACKING THE MAINBOARD

When unpacking the mainboard, check for the following items:

ØThe SY-V6BE+ AGP/PCI Mainboard

ØThis Quick Start Guide *

ØThe Installation CD-ROM *

ØOne IDE Device Flat Cable

ØOne Floppy Disk Drive Flat Cable

* If your board comes with a driver disc and a paper manual, the Quick Start Guide

and the CD-ROM are not included in the package.

Warning: Do not unpack the mainboard from its anti-static

packaging until you are ready to install it.

Like most electronic equipment, your mainboard may be damaged

by electrostatic discharge. To avoid permanent damage to

components ground yourself while working by using a grounding

strap. Otherwise, ground yourself frequently by touching the

unpainted portion of the computer chassis to drain the static

charges.

Handle the mainboard carefully, holding it by the edges.

You are now ready to start the installation.

2-3 INSTALLATION GUIDE

We will now begin the installation of the mainboard. Please follow

the step-by-step procedure designed to lead you to a complete and

correct installation.

Warning: Turn off the power to the mainboard, system

chassis, and peripheral devices before performing any

work on the mainboard or system.

Andere Handbücher für SY-V6BE+

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-7VEM Bedienungsanleitung

SOYO

SOYO SY-7IWA-F Bedienungsanleitung

SOYO

SOYO SY-7VMA-B Bedienungsanleitung

SOYO

SOYO DRAGON 2 Motherboard 2 Bedienungsanleitung

SOYO

SOYO SY-K7VTA-B Bedienungsanleitung

SOYO

SOYO Motherboard SY-6ZB Bedienungsanleitung

SOYO

SOYO 82430 HX/P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4X400 DRAGON Lite Bedienungsanleitung

SOYO

SOYO 82430 TX P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-K7ADA Bedienungsanleitung

SOYO

SOYO SY-K7VME Bedienungsanleitung

SOYO

SOYO SY-6BE Bedienungsanleitung

SOYO

SOYO SY-6BB Bedienungsanleitung

SOYO

SOYO 82430 VX PCI Bedienungsanleitung

SOYO

SOYO SY-7IWB Bedienungsanleitung

SOYO

SOYO SY-6VBA 133 Bedienungsanleitung

SOYO

SOYO TechAID Bedienungsanleitung

SOYO

SOYO SY-7VEM Bedienungsanleitung

SOYO

SOYO DRAGON Lite SY-KT333 Bedienungsanleitung

SOYO

SOYO SY-K7VEM+ Bedienungsanleitung

SOYO

SOYO SY-K7VEMPRO V1.0 Bedienungsanleitung

SOYO

SOYO SY-7IWM Bedienungsanleitung

SOYO

SOYO SY-6IZA Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-V6BE+ Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung