Spacosa Gper Bedienungsanleitung
2015년3월
Gper Manual
Gper
Gper
LED display
Power Button
Function Button
50mm
50mm
-사용가능기기 안드로이드 4.3 이상, iOS 7.0 이상
-무게 42g
-충전시간 약90분
Gper Features
CPU - Nordic nRF51822, Bluetooth Low energy/ 2.4GHz RF system on chip
- ARM Cortex-M0 32bit processor
GPS -Quectel, 66 search channels, Sensitivity - 165dBm(tracking)
ANT -LoRa® : Internal helical ANT . GPS : Internal Patch ANT.
DISPLAY -THREE COLOR LED
BUTTON -2 Button (POWER & SOS)
POWER -5V 1A (Micro USB)
SENSOR -BOSCH BMA250E, Triaxial acceleration sensor
Gper Features
1. To switch on or off the device: Press and hold Power button
2. SOS function: Press and hold the F button for 5 seconds
3. Change into Bluetooth mode: Press and hold Power and F button
together for 5seconds
•Device can be registered in to app(FAMY)
•Device’s firmware can be updated
4. To charge the device: connect USB cable to USB port jack within the
device.
5. All above features are necessary for the actual use of location
tracking service.
As the device collects location data and send its location data to the
server through LoRa network.
Gper LED signal
03. Registering Object–1) Gper
3-1-1 Gper for CATCH LOC App Download
This app need to register Gper only first time.
If you already registered Gper, you just manage it in catchloc SaaS or App.
<Gper APP Download & Install>
Search for “Gper” in Android Market, iOS app store to download ‘Gper for CATCH LOC’ app.
Android Download Address:
https://play.google.com/store/apps/details?id=com.spacosa.android.gper.b2b
iOS (iPhone) Download Address:
sorry. We don’t develop.
- Download app.
- Install app.
- Run app
- Use ID/Password that has been
provided by SPACOSA or You has
created
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
03. Registering Object–1) Gper
3-1-2 Gper for CATCH LOC App: Registration
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
- Please select the target - STEP 02 : Switch on Gper.
Press Power button for 2 seconds.
If you can see flashing Red LED, It turns on.
Power Button
03. Registering Object–1) Gper
3-1-3 Gper for CATCH LOC App: Registration
- STEP 05
Please choose a group you wish the device
to be belong to.
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
- STEP 03
Press and Hold Power and F button for 2
seconds to turn beacon mode on
- LED will flash in RED & BLUE.
- STEP 04
Please SELECT the device the strongest signal
Please set the password for Security.
If no gper password, anyone can
register gper. Then anyone can
see the gper’s location.
03. Registering Object–1) Gper
3-1-4 Gper for CATCH LOC App: Registration
Registration Completed
Login >> Create a group >> Registering Object >> Registering Group members >> Using service
- STEP 05
If Gper have a password.
Andere Handbücher für Gper
1
Andere Spacosa GPS Handbücher
