7
BBQ ASSEMBLY
Assembling the Lid
1. Attach one of the handles (1) onto the
fire bowl (7) using 2 each of the “B”
Washers and Wing Nuts.
Ensure the fibre washers are placed on
the outside of the fire bowl and the
metal washers and wing nuts are
placed on the inside of the fire bowl.
2. Attach the ash cup ring (19) to the
bottom of the fire bowl using 2 each of
the “A” Bolts, Washers and Nuts.
Ensure the bolts are placed on the
outside of the fire bowl and the
washers and nuts are placed on the
inside of the fire bowl.
19.
7.
1.
1. Attach one of the handles (1), the heat
resistant plate (18) and the lid support
(4) onto the lid (3) using 2 each of the
“B” Washers and Wing Nuts.
The lid support should be placed on the
inside of the lid.
Ensure the fibre washers are placed on
the outside of the lid and the metal
washers and wing nuts are placed on
the inside of the lid.
2. Attach the lid air vent (2) onto the lid
(3) using 1 each of the “A” Bolts,
Washers and Nuts.
Ensure the bolt is placed on the outside
of the fire bowl and the washer and
nut are placed on the inside of the fire
bowl.
1.
18.
4.
3.
2.
Assembling the Fire Bowl
