Spearhead Excel 323 Bedienungsanleitung

Excel 323 Reach Mower

Excel 323 & Twiga 3000

Reach Mowers

Excel 323 Reach Mower

Spearhead

Excel 323 &

Twiga 3000

Compact Reach Mower

Handbook

5th Edition –October 2008

Important Note

The information contained in this manual is correct at the time of publication.

However, in the course of constant development, changes in specification are

inevitable. Should you find the information given in this book different to the

Machine it relates to please contact the “After Sales Department” for advice

Please ensure that this manual is handed to the operator before using the

machine for the first time. The operator must fully understand the contents

of this manual before using this machine.

(If the machine is resold the Manual must be given to the new owner.)

Spearhead Machinery

Green View

Salford Priors

Evesham

Worcestershire

WR11 8SW

Tel: 01789 491860

Fax: 01789 778683

www.spearheadmachinery.com

enquiries@spearheadmachinery.com

Excel 323 Reach Mower

CE Declaration of Conformity,

Conforming to EU Machinery Directive 2006/42/EC

We, Spearhead Machinery Ltd, Green View, Salford Priors, Evesham,

Worcestershire, WR11 8SW hereby declare that:

Product ……………………………………………..…………………………

Product Code……………………………………………..…………………………

Serial No……………………………………………..……..………………….

Type……………………………………………..…………………………

Manufactured by: Alamo Manufacturing Services (UK) Limited, Station Road, Salford

Priors, Evesham, Worcestershire, WR11 8SW

Complies with the required provisions of the Machinery Directive 2006/42/EC. The

Machinery Directive is supported by the following harmonized standards:

•BS EN ISO 14121-1 (2007) Safety of Machinery –Risk Assessment, Part 1:

Principles Part 2: Practical Guide and Examples of Methods.

•BS EN ISO 12100-1 (2010) Safety of Machinery –Part 1: Basic Terminology

and Methodology Part 2: Technical Principles.

•BS EN 349 (1993) + A1 (2008) Safety of Machinery –Minimum Distances to

avoid the Entrapment of Human Body Parts.

•BS EN 953 (1998) Safety of Machinery –Guards General Requirements for the

Design and Construction of Fixed and Movable Guards.

•BS EN 982 (1996) + A1 (2008) Safety Requirements for Fluid Power Systems

and their Components. Hydraulics.

The EC Declaration only applies if the machine stated above is used in accordance

with the operating instructions.

Signed

(On behalf of Spearhead Machinery Ltd)

Status General Manager

Excel 323 Reach Mower

Date ………………………………………………

Contents

Specification 5

Safety 6

Safety Stickers 9

Installing your Machine

Introduction 10

Tractor Requirements 10

Attaching To The Tractor 11

Running Up Your Machine 16

Removing From The Tractor 17

Layout Of Controls In The Cab 18

Reach Mower Set-Up 19

Warnings 22

Engaging & Disengaging Head Drive 23

Transport To Work Position 24

Moving Into Transport Position 25

Cutting Sequence 26

Break Back 26

Wire Trap 27

High Voltage Cables 27

Optional

Debris Blower 28

Oil Cooler 28

Servicing & Maintenance

Lubrication Chart 29

Torque Settings 30

Hydraulic Hoses 31

Oil Supply 32

Filtration Maintenance 32

Flail Head 33

Pins & Bushes 34

Pump & Motor Failure 35

Warranty Conditions 36

Excel 323 Reach Mower

Specification

Excel 323

Weight including oil (kg)

495

Tractor (hp)

25 - 40

Minimum tractor weight (kg)

1250

Oil tank capacity (It/min)

3.9m

3.2m

0.7m

2.2m

Excel 323 Reach Mower

Safety Recommendations

Beware of the following Potential Dangers associated with the use

of this machine:

•Becoming trapped when hitching or unhitching

•Tractor overbalancing when arm is extended

•Electrocution due to hitting overhead power lines

•Getting caught on rotating power take off (PTO)

•Being hit or caught by any moving part, e.g. belts, pulleys, arms, cutting head

•Being hit by flying debris or machine parts due to machine damage

•Machine overbalancing when not in use

•Injection of high pressure oil from damaged couplings or hydraulic hoses

•Accidents due to collision with other machines, or debris left on road

Always

•Ensure the operator has read this handbook and has been trained to use the

machine.

•Ensure all cab safety guards are in place and all tractor windows closed.

•Before leaving the tractor cab always ensure that the flail head is firmly on the

ground, no weight is on the machine’s hydraulics and the rotor has stopped

spinning.

•Check that all guards are properly fitted and there are no damaged or loose

parts. Particular attention should be given to the flails to ensure they are not

damaged, cracked or missing.

•Inspect work area for wire, steel posts, large stones and other dangerous

materials and remove before starting work.

•Beware of the danger of overhead power cables. The operator must be

aware of the maximum height and reach of the machine when working under

power cables. The minimum legal height for 11,000 and 22,000-volt cables is

5.2 metres from the ground. When fully extended, the machine may well

exceed this height so extreme caution should be practised. For more

information contact the Health and Safety Executive or your local power

company.

•Ensure that all warning labels are always visible and that they are not

damaged, defaced or missing.

•Lower the head to the ground when parking up

•Fit locking pins to slew and height before transport and before unhitching

when applicable.

•Wear ear defenders if operating without a quiet cab or with the cab windows

open.

•Ensure tractor guards are fitted correctly and are undamaged

•Work at a safe speed, taking into account terrain, passing vehicles and

obstacles

Safety

Excel 323 Reach Mower

•Ensure that the tractor meets the minimum weight recommendations of the

machine manufacturer and that ballast is used if necessary

•Check that machine fittings and couplings are in good condition

•Follow the manufacturer’s instructions for attachment and removal of machine

from the tractor are warning signs to alert others to the type of machine

working in the vicinity. Signs should be placed at both ends of the work site

and should be in accordance with Department of Transport

recommendations.

•Ensure flails are of the type recommended by the manufacturer, are securely

fitted and are undamaged.

•Ensure hydraulic pipes are correctly routed to avoid damage from chafing,

stretching, pinching or kinking.

•Disengage the machine, stop the engine and remove the key before leaving

the tractor cab for any reason.

•Clean up any debris left at the work site.

•Ensure that when you remove the machine from the tractor it is secured in a

safe position using the stands provided.

Never

•Never operate the machine with other people present, as it is possible for

debris, including stones, to be discharged from the front and rear of the flail

head.

•Never operate the machine until you have read and understood the relevant

Handbook and are familiar with the controls.

•Never use a machine that is poorly maintained or has guards that are

damaged or missing

•Never allow an inexperienced person to operate the machine without

supervision.

•Never use or fit a machine onto a tractor if it doesn’t meet the manufacturer’s

specification.

•Never use a machine if the hydraulic system shows signs of damage.

•Never attempt to detect a hydraulic leak with your hand, use a piece of card.

•Never allow children to play on or around the machine at any time.

•Never attempt any maintenance or adjustment without first disengaging the

PTO, lowering the head to the ground, stopping the tractor engine and

applying the tractor parking brake.

•Never leave the cab without removing the ignition key.

•Never operate the tractor or any controls from any position other than from

the driving seat.

•Never stop the engine with the PTO engaged.

•Never operate with flails missing.

•Never operate PTO above recommended speed, 540 R.P.M. flail head,

150 R.P.M. cutter-bar.

•Never operate with wire around the rotor. Stop immediately.

•Never use the head at an angle, which may throw debris towards the cab.

•Never attempt to use the machine for any purpose other than that it was

designed for.

•Never transport with the PTO engaged

•Never enter the working area of the machine (risk of injury!)

•Never transport with the controls live, always turn off electrical isolator switch

(red) and disconnect supply.

Excel 323 Reach Mower

Warning Signs

You are advised to display clear warning signs to indicate the type of machine when

working in public places. The signs should be carefully placed at either end of the

work site to give advanced warning of the hazard.

Contact your local Highways Authority or Department of Transport for more

information.

Roadwork Guidelines:

On two-way roads, one set of signs should face the traffic in each direction.

Work should be within 1 mile of the signs.

Work only when visibility is good and at times of low risk, e.g. NOT during rush hour.

Vehicles should show an amber flashing light.

Vehicles should be conspicuously coloured.

Debris should be removed from the road or path at regular intervals and the operator

should wear high visibility clothing.

Collect all warning signs promptly when the job is finished.

Training

It is the responsibility of the Spearhead dealer to provide instruction on the safe

installation, operation and maintenance of the machine in the first instance. Further

training is available from Spearhead Machinery Ltd on request, at cost.

Lifting Point

Excel 323 Reach Mower

Safety Stickers

Warning

Stay clear of mower blade

as long as engine is

running.

Warning

Danger –flying objects

keep safe distance from

the machine as long as

the engine is running.

Warning

Shut off engine and remove

key before performing

maintenance or repair work.

Warning

Carefully read operator’s

manual before handling this

machine. Observe

instructions and safety rules

when operating.

Warning

Stay clear of mower blade

as long as engine is

running.

Warning

Beware of

escaping fluid.

Warning

Beware of overhead

electrical power line.

Warning

Check all nuts are

tight every 8 hours.

Excel 323 Reach Mower

Introduction

The Excel is a very robust high capacity reach mower that is easy to operate and

maintain. Ideally suited to compact tractors engaged in the task of maintenance

mowing of green vegetation and annual hedge trimming. To ensure trouble-free

operation this manual should be carefully studied

The term Left and Right hand applies to the machine when coupled to the tractor and

viewed from the rear, this also applies to the tractor.

Tractor Requirements

•Check your Tractor size and minimum weight on the Specification table

•Before hitching, ensure position control is selected. Do not attempt to hitch in

draft control.

•Set wheel width as wide as possible.

•Ballast weight is to be fitted within tractor manufacturer’s recommended

requirements

•Check chains and stabilisers must be in good working order to hold the

machine firmly. Do not operate without checking chains and stabilisers are

tight.

•Spearhead particularly recommend ‘turn buckle’ type stabiliser.

•Set linkage lift rods to an equal length

•Certain machines require a 12V fused electric supply that is controlled by the

tractor’s ignition key.

•Spearhead particularly recommend “Category 1” three point linkage of ball

end type, we do not advise the use of claw type hitching. The quick release

latches should be checked, if worn or insecure they may cause accidental

damage or personal injury if the machine becomes detached.

•Ensure tractor link arms can be isolated from accidental lifting.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Spearhead Rasenmäher Handbücher

Spearhead

Spearhead Twiga Series Bedienungsanleitung

Spearhead

Spearhead ROLLIFLAIL 150 Montageanleitung

Spearhead

Spearhead Rollicut 500 Bedienungsanleitung

Spearhead

Spearhead Twiga Carrier CF20 Montageanleitung

Spearhead

Spearhead AGRICUT 180 Montageanleitung

Spearhead

Spearhead RHD OPEN Series Bedienungsanleitung

Spearhead

Spearhead AGRICUT 240 OFFSET Bedienungsanleitung

Spearhead

Spearhead 15 Park Installations- und Betriebshandbuch

Spearhead

Spearhead R Series Bedienungsanleitung

Spearhead

Spearhead Multicut 300 Montageanleitung

Spearhead

Spearhead Sniper Series Bedienungsanleitung

Spearhead

Spearhead AGRICUT 180 Bedienungsanleitung

Spearhead

Spearhead MULTICUT 460 Bedienungsanleitung

Spearhead

Spearhead RHD OPEN Series Bedienungsanleitung

Spearhead

Spearhead Excel 606 Bedienungsanleitung

Spearhead

Spearhead R130 Produkthandbuch

Spearhead

Spearhead Q15S Bedienungsanleitung

Spearhead

Spearhead RHD OFFSET 160 Bedienungsanleitung

Spearhead

Spearhead TWIGA COMPACT Bedienungsanleitung

Spearhead

Spearhead MULTICUT 160 Bedienungsanleitung

Spearhead

Spearhead ORBITAL S63 Bedienungsanleitung

Spearhead

Spearhead Q15S Installations- und Betriebshandbuch

Spearhead

Spearhead RHD Series Bedienungsanleitung

Spearhead

Spearhead ROLLICUT 170 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung