Specialized JETT 24 Bedienungsanleitung
ASSEMBLY GUIDE
EN / FR / DE / ES / PT / CNS
1
We may occasionally issue updates and addendums to this document. Please periodically check
www.specialized.com or contact Rider Care to make sure you have the latest information.
Info: specialized.com / 877-808-8154
SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229
0000158849_UM_R2, 08/21
2
ENFRDEESCNSFREEFREE PT
An informative and important video explaining how to properly assemble the Jett is available.
It also demonstrates how to do a safety check once assembled. This assembly/setup guide is
intended to be used together with the video. Visit www.specialized.com/setupmyjett or scan
the QR code with your smartphone camera.
1.1 INTENDED USE
The Jett bicycle is intended and tested for use by children only (Condition 6).
CONDITION 6 Bicycles designed to be ridden by children.
Parental supervision is required at all
times. Avoid areas involving automobiles,
and obstacles or hazards including
inclines, curbs, stairs, sewer grates or
areas near drop-offs or pools.
1. INTRODUCTION
This assembly/setup guide is specific to your Specialized Jett bicycle. It contains important
information about assembly and safety, which you should read before the rider's first ride
and keep for reference. You should also read the entire Specialized Bicycle Owner’s Manual
(“Owner’s Manual”) because it has additional important general information and instructions
which you should follow. If you do not have a copy of the Owner’s Manual, you can download
it at no cost at www.specialized.com, or obtain it from your nearest Authorized Specialized
Retailer or Specialized Rider Care.
Assembly of this bicycle requires experience in the use of basic tools as well as general
knowledge regarding bike maintenance. If you do not have such experience, it should be
assembled by an Authorized Specialized Retailer.
When reading this user manual, you will note various important symbols and warnings, which
are explained below:
WARNING! The combination of this symbol and word indicates a potentially
hazardous situation which, if not avoided, could result in serious injury or
death. Many of the Warnings say “you may lose control and fall.” Because
any fall can result in serious injury or even death, we do not always repeat the
warning of possible injury or death.
This symbol alerts the reader to information which is particularly important.
SET UP
MY JETT
specialized.com
/setupmyjett
FOR
CHILDREN
ONLY
6
3
2. WHAT IS IN THE BOX
4
6
3
2 7713 910
1
12 8
5
11
1.2 WARRANTY
Please refer to the written warranty provisions provided with your bicycle, or visit
www.specialized.com. A copy is also available at your Authorized Specialized Retailer.
1.3 STRUCTURAL WEIGHT LIMITS
MODEL MAX CARGO
(lb / kg)
MAX STRUCTURAL INCL
CARGO (lb / kg)
16/20 30/14 100 / 45
24 30/14 220/ 100
STRUCTURAL WEIGHT LIMIT: The maximum total weight (rider and cargo) a bicycle is
designed and tested to support structurally.
CARGO WEIGHT LIMIT: The maximum cargo weight a bicycle has been designed and tested
to support structurally.
For more information on the intended use and structural weight limits for the
frame and components, please refer to the Owner's Manual.
4
ENFRDEESCNSFREEFREE PT
#DESCRIPTION TORQUE
TOOL SIZE Nm in-lbf
1FRAME
2FORK
3SEATPOST/SADDLE
4HANDLEBAR
5
SEAT COLLAR
5 mm hex 7 62
6STEM 4 mm hex 5 45
7FRONT/REAR WHEEL 15 mm wrench 3/8 turn
8PEDALS 15 mm wrench 1/16 turn
9REFLECTORS Phillips screwdriver
(not provided)
10 TORQUE WRENCH
11 HEX BITS 4, 5, 6* mm hex bits
12 FLAT WRENCH 15 mm wrench
13 MANUALS
*Included with certain models.
3. ASSEMBLE THE BICYCLE
UNPACK THE BOX
WARNING! CHOKING HAZARD - packaging may contain small parts. Not for
children under 3 years old. The Jett bicycle must be assembled by an adult.
Follow the steps below and perform a safety check before riding.
A
3.1
Fig. 3.1
Remove any security tape, then pull out each of the four tabs (A).
Lift the top of the box up and off the base packaging.
The Jett 16 box opens at the top. Remove any security tape, then pull out the
tabs and open the top of the box. Lift the bike and its internal packaging out of
the box and continue with the assembly steps.
5
3.2
Fig. 3.2
In the rear packaging tower, pull out the tabs holding the small parts box in place, then
remove the small parts box.
Open the small parts box and remove the manuals, pedals, reflectors, and all the tools
required for assembly.
3.3
Fig. 3.3
Lift and remove the packaging brace.
6
ENFRDEESCNSFREEFREE PT
1
2
4
3
3.4
Fig. 3.4
In the front packaging tower, lift both the handlebar and interior packaging (1), then slide
the packaging off of the handlebar (2).
Pull the handle bar forward and out of the center packaging tower (3), then lift the center
packaging tower off of the bicycle (4).
3.5
Fig. 3.5
Pull out the tabs on the bottom of the front packaging tower (three total, one on each side).
Lift and remove the front packaging tower.
7
USING THE TORQUE WRENCH & FLAT WRENCH
Your Jett bicycle is supplied with a custom torque wrench and flat wrench which should be
used to tighten the bolts where indicated. It is important to properly use a torque wrench
during assembly to make sure all bolts are tightened to specification. Keep both wrenches for
future adjustments and maintenance.
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your
bicycle is important for your safety. If too little force is applied, the fastener may
not hold securely. If too much force is applied, the fastener can strip threads,
stretch, deform, or break.
An incorrect tightening force can result in component failure, which can cause
you to lose control and fall. Where indicated, ensure each bolt is torqued to
specification. After your first ride, and consistently thereafter, recheck the
tightness of each bolt to ensure secure attachment of the components.
Following are instructions on how to use the provided torque wrench and flat
wrench. If after reading the instructions you are still unsure of how to use the
torque wrench or flat wrench, please contact your Authorized Specialized
Retailer for assistance.
3.6
Fig. 3.6
While holding the rear packaging tower, roll the bicycle forward out of the base packaging.
Flip the kickstand down to hold the bicycle upright for assembly.
Do not remove Jett 16 models from the rear tower and base packaging until
the rest of the assembly steps are completed. The Jett 16 does not come with a
kickstand. The packaging will hold the bicycle upright during assembly.
RECYCLE: Please recycle all of the packaging.
8
ENFRDEESCNSFREEFREE PT
B
A
3.7
Fig. 3.7
HOW TO USE THE TORQUE WRENCH
Two different hex bits are provided with the torque wrench for single-speed Jett models: 4 mm
and 5mm. If you have a multi-speed Jett model, the torque wrench is also provided with a 6
mm hex bit to adjust the crank length.
Determine which hex bit is needed and insert it into the socket of the torque wrench (A).
When there is no tension on the torque wrench lever arm, the right-side edge of the arm is
aligned with the small white line to the left of the “0” (B).
A
3.8
Fig. 3.8
Insert the torque wrench into the bolt head (A) and turn the lever arm clockwise until you
feel resistance and the lever arm starts to flex.
Once the lever arm starts to flex, apply the correct torque to the bolt by turning the lever
until the torque pointer is aligned with the applicable numbered line on the torque gauge,
then stop and remove the troque wrench from the bolt (e.g. if the specification is 6 Nm,
turn until the torque pointer is aligned with the line to the left of "6"). Torque settings are
listed for each individual bolt and nut in Section 2.
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Sprachen:
Andere Specialized Fahrrad Handbücher
Specialized
Specialized SHIV Bedienungsanleitung
Specialized
Specialized VADO Bedienungsanleitung
Specialized
Specialized SAGAN HOTWALK Bedienungsanleitung
Specialized
Specialized SIRRUS 1.0 Bedienungsanleitung
Specialized
Specialized SHIV Handbuch
Specialized
Specialized Hotwalk Carbon Bedienungsanleitung
Specialized
Specialized Roubaix Handbuch
Specialized
Specialized Stumpjumper FSR Bedienungsanleitung
Specialized
Specialized FSRXC Bedienungsanleitung
Specialized
Specialized Turbo Creo SL Expert Bedienungsanleitung
Specialized
Specialized STUMPJUMPER FSR 26 Bedienungsanleitung
Specialized
Specialized TARMAC SL7 Bedienungsanleitung
Specialized
Specialized Roubaix Bedienungsanleitung
Specialized
Specialized 2014 FSR Bedienungsanleitung
Specialized
Specialized LEVO 2022 Kurzanleitung
Specialized
Specialized MOUNTAIN BOX 2 Bedienungsanleitung
Specialized
Specialized ALLEZ E5 DISC Bedienungsanleitung
Specialized
Specialized BICYCLE Bedienungsanleitung
Specialized
Specialized TURBO ROAD Bedienungsanleitung
Specialized
Specialized Roubaix Handbuch
