Speco HTB11FFi Bedienungsanleitung
HTB11FFi
540 Line Color Bullet Camera
Intensifier Series, Focus Free
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
WARNING & CAUTION
The lighting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons____________________________________
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (serving) instructions
in the literature accompanying the appliance__________________
INFORMATION -This equipment has been tested and found to company with
limits for a class a digital device Pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
Interference When the equipments operated in a commercial environment.
This equipment generates, uses, and Can Radiate radio frequency energy and
if not installed and used in accordance with the instruction manual, may Cause
Harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which
Case the user will be required to correct the interference at his own expense.
WARNING – Change or modification not expressly approved by the manufacturer could void
the user’s authority to operate the equipment__________________________________
CAUTION : To prevent electric shock and risk of fire hazards.
DO NOT use power sources other than that specified.______
DO NOT expose this appliance to rain or moisture.000
This installation should be made by a qualified service person and should conform to all local codes.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICINGTO QUALIFIED
SERVICE PERSONNEL._______________
CAUTION
Contents
3
Package Contents
4
Precautions
5~7
Camera Installation
8~9
Features
10~15
OSD Setting
16~17
Troubleshooting
18
Specification
19
Dimension
20
Warranty
2
PACKAGE CONTENTS
•Please make sure that the following items are included
in the package:
1 HTB11FFi Camera
4 Mounting Screws
1 Video Test Cable
Please leave this manual with the end-user for future
reference.
3
PRECAUTIONS
•THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY
QUALIFIED PERSONNEL
•TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
•DO NOT CLEAN THE COVER WITH AN ABRAISIVE CLEANING
MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO
CLEAN THE COVER
•THERE ARE NO USER-SERVIEABLE PARTS INSIDE. PLEASE
DO NOT DISASSEMBLE THIS CAMERA OTHER THAN TO
MAKE INITIAL ADJUSTMENTS
•PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
12 VOLT DC POWER SUPPLY
•PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
•PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
•PLEASE HANDLE THIS CAMERA CAREFULLY:
-DON
’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
-DON
’T EXPOSE THE CAMERA TO DIRECT SUN
4
CAMERA INSTALLATION
1. CONNECT POWER CABLE
1) WHEN USING 12 VOLTS DC (constant voltage 600 mA)
-CONNECT ACCESSORY CABLE TO THE CABLE LEAD
OF THE CAMERA AND CONNECT 12V DC POWER SUPPLY.
2) WHEN USING 24 VOLTS AC (40 Volt Amps)
3) CONNECT VIDEO CABLE
-CONNECT BNC CABLE TO THE BNC JACK.
4) CONNECT RS-485 CABLE (Optional)
-CONNECT 2WIRE CABLE TO THE 485PORT AS BELOW.
YELLOW:VIDEO OUT
POWER SUPPLY
CONNECT
POWER INPUT:RED
CENTER:(+)
CONNECT
BLACK:(-)
CAMERA RED(+)
POWER SUPPLY
AC 24V
5
CAMERA INSTALLATION
2. CONTROL BOARD
1) Video Test Terminal
: For second video output
2) OSD (On Screen Display) Joy stick
: Press the Joy stick for one second until the OSD menu tree
appears on the screen. Move the Joy Stick up, down, left &
right to control the OSD functions.
3) DIP Switch setting for RS485 (Pelco-D)
: Please see the next page for controlling this switch.
4) Lens adjustment (for Zoom) Switches
: Press Zoom or Tele button when desired, Focus is
automatically matched without any adjustment.
1
23
4
6
CAMERA INSTALLATION
3. DIP Switch Setting for RS-485 (Pelco-D)
2) Baud rate Setting
: to set Baud rate, please refer the chart below.
1 2 3 4 5 6
1) Address Setting
: to set Camera Address, place switches based on below chart.
7
Features
SLC
When the image is in front of strong background lighting,
your camera allows you to get a clear image.
INTENSIFIER
1/3 inch high-density CCD and digital processor permit
high quality Pictures to be captured in very low light
conditions.
High Resolution
Horizontal resolution of 540 TV lines is achieved by using a
SONY Double Speed CCD with 410,000 pixels.
Motion Detection
Built in motion detector with adjustable areas of coverage will
flash a warning on the screen when motion is detected.
8
OSD
All camera functions are menu driven for easy use.
Dynamic Noise Reduction
The Intensifier camera has a DSP chip that can remove image
noise efficiently showing clean images in low light conditions.
ELECTRONIC DAY/NIGHT
The Intensifier camera can show color pictures in all lighting
conditions, or you can have it automatically switch to a B/W
picture in low light conditions
9
Andere Handbücher für HTB11FFi
2
Inhaltsverzeichnis
Andere Speco Sicherheitskamera Handbücher
Speco
Speco Bullet2 HT-B10X Bedienungsanleitung
Speco
Speco HT-7246IHR Bedienungsanleitung
Speco
Speco CVC-61HRB Bedienungsanleitung
Speco
Speco O4D9 Bedienungsanleitung
Speco
Speco O5LT1 Bedienungsanleitung
Speco
Speco HT-7815DNV Bedienungsanleitung
Speco
Speco VLEDT2W Series Bedienungsanleitung
Speco
Speco VLEDT2HG Bedienungsanleitung
Speco
Speco O4FT2 Bedienungsanleitung
Speco
Speco O4iB1M Bedienungsanleitung
Speco
Speco ProVideo CVC-6800EX Bedienungsanleitung
Speco
Speco Intense-IR Series Bedienungsanleitung
Speco
Speco CVC6146SCFF Bedienungsanleitung
Speco
Speco WDR705H Bedienungsanleitung
Speco
Speco Deterrent O4TDD1M Bedienungsanleitung
Speco
Speco O8B7M Bedienungsanleitung
Speco
Speco HTSD10X Bedienungsanleitung
Speco
Speco Intensifier O2iBD3 Bedienungsanleitung
Speco
Speco CVC-5815DNV Bedienungsanleitung
Speco
Speco O2iMT61 Bedienungsanleitung
