Speco HTD8SCS Series Bedienungsanleitung
HTD8SCS Series
540 Line Color Dome Camera
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
WARNING & CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE
CAUTION
The lighting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons____________________________________
The exclamation point within an equilateral triangle is intended to alert the user
to
the
presence
of
important
operating
and
maintenance
(serving)
instructions
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL._______________
to
the
presence
of
important
operating
and
maintenance
(serving)
instructions
in the literature accompanying the appliance__________________
INFORMATION -This equipment has been tested and found to company with
limits for a class a digital device Pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
Interference When the equipments operated in a commercial environment.
This equipment generates, uses, and Can Radiate radio frequency energy and
if not installed and used in accordance with the instruction manual, may Cause
DO
NOT
use
power
sources
other
than
that
specified
.
Harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which
Case the user will be required to correct the interference at his own expense.
WARNING – Change or modification not expressly approved by the manufacturer could void
the user’s authority to operate the equipment__________________________________
CAUTION : To prevent electric shock and risk of fire hazards.
DO
NOT
use
power
sources
other
than
that
specified
.
_
_____
DO NOT expose this appliance to rain or moisture.000
This installation should be made by a qualified service person and should conform to all local codes.
Contents
Package Contents 3
Precautions 4
Camera Installation 5-6
Features
Internal Components 7
8
OSD 9
1
Operating Your Camera
SET UP
SET UP LENS
SHUTTER SPEED CONTROL
10
10
10
SHUTTER
SPEED
CONTROL
BACK LIGHT
AUTO GAIN (AGC)
WHITE BALANCE
CAMERA TITLE
MIRROR
10
10
11
11
12
DAY/NIGHT/SYNC
MOTION DETECTION
PRIVACY
GAMMA
RESET
ADJUST
12
12
12
13
13
13
Specifications
EXIT
14
13
Dimensions 15
2
Warranty 16
PACKAGE CONTENTS
•Please make sure that the following items are included
in the package:
1 CAMERA & Easy Mount Plate
ACCESSORIES:
4 MOUNTING SCREWS
4 SET SCREWS
1 RUBBER CABLE CAP
1 VIDEO TEST LEAD
1 WRENCH
Please leave this manual with the end-user for future
reference.
3
PRECAUTIONS
•THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY
QUALIFIED PERSONNEL
•TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
•PLEASE USE AN APPROVED REGULATED 12 VOLT DC
POWER SUPPLY LIKE THE SPECO PSW-5
•PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
•
PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
•
PLEASE
INSURE
THAT
YOUR
INSTALLATION
AREA
CAN
SUPPORT THE WEIGHT OF THE CAMERA
•PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- DO NOT EXPOSE THE CAMERA TO DIRECT SUN
4
CAMERA INSTALLATION
Easy Mount Plate
Rubber Cap used when cables
1. Assembly
Rubber
Cap
used
when
cables
go through the mount
Mounting Screws (4ea)
SET Screws (2ea)
Camera Base
OSD Joystick &
Video Test Connector
Camera Body
Focus & Zoom Controller
Front Case
SET Screws (2ea)
5
Outer Housing
CAMERA INSTALLATION
2. Compatibility
7246WMT CVC-TPEXT “A” type Box “B” type Box
BCP(Using 7246WMT)
Hole 1 : 7246WMT / CVCTPEXT
[CVCTPLATE Hole Description]
Hole 2 : Electrical Box “A” type
Hole 3 : Electrical Box “B” type
6
INTERNAL COMPONENTS
Video Test Terminal
LEFT
UP
RIGHT
SET
OSD Joystick Switch
LEFT
DOWN
Push the Joy stick for one second, and the OSD appears
7
Push
the
Joy
stick
for
one
second,
and
the
OSD
appears
on the screen. Move the Joy Stick up, down, left & right to
control the OSD functions.
Features
When the image is in front of strong background lighting,
your camera allows you to get a clear image.
BLC
High Resolution
Horizontal resolution of 540 TV lines is
achieved by using a SONY Double Speed CCD with
410,000 pixels, yielding pictures with a high S/N ratio.
High
Resolution
OSD
All camera functions are menu driven for easy use.
The camera can show color pictures in all lighting
conditions, or you can have it automatically switch to a B/W
picture in low light conditions
ELECTRONIC DAY/NIGHT
Built in motion detector with adjustable areas of coverage will
flash a warning on the screen when motion is detected.
Motion Detection
picture
in
low
light
conditions
8
Inhaltsverzeichnis
Andere Speco Sicherheitskamera Handbücher
Speco
Speco O3FB68 Bedienungsanleitung
Speco
Speco ONSIP OPTZ36XO Bedienungsanleitung
Speco
Speco HT-INTD8 Bedienungsanleitung
Speco
Speco HT-7815DNV Bedienungsanleitung
Speco
Speco CVC-628M Bedienungsanleitung
Speco
Speco 650Line Intensifier3 Series Bedienungsanleitung
Speco
Speco O3FDP9 Bedienungsanleitung
Speco
Speco O4DT1 Bedienungsanleitung
Speco
Speco PROVIDEO CVC-627 Bedienungsanleitung
Speco
Speco CVC-1724 Bedienungsanleitung
Speco
Speco WDR-B1 Bedienungsanleitung
Speco
Speco O4P4X2 Bedienungsanleitung
Speco
Speco CVCM6DC Bedienungsanleitung
Speco
Speco O8FT1W Bedienungsanleitung
Speco
Speco INTENSIFIER HTINTB10 Bedienungsanleitung
Speco
Speco HT7248TM Bedienungsanleitung
Speco
Speco O4P4X Bedienungsanleitung
Speco
Speco O4iT2 Bedienungsanleitung
Speco
Speco RC-650 Betriebsanleitung
Speco
Speco O2iBD5 Bedienungsanleitung
