Speco O4VD1N Bedienungsanleitung

Quick Start Guide

O4VT1N

Welcome

Thank you for purchasing this network camera!

This owner's manual is designed to be a reference tool for your system.

Please read this manual carefully before operating the unit and retain it for future reference.

Should you require any technical assistance, contact Speco Technologies Tech Support at

1-800-645-5516

1. Electrical safety

All installation and operation here should conform to local electrical safety codes.

Use a certified/listed 12VDC Class 2 power supply only.

Please note: Do not connect two power supplying sources to the device at the same time;

it may result in device damage! The product must be grounded to reduce the risk of

electric shock.

Improper handling and/or installation could run the risk of fire or electrical shock.

2. Environment

Heavy stress, violent vibration or exposure to water is not allowed during transportation,

storage and installation.

This product should be installed in a cool, dry place away from direct sunlight and heat

sources.

Do not install the product in extreme temperature conditions.

Do not expose the camera to electromagnetic radiation. Otherwise it may result in CMOS

sensor failure.

Do not block any ventilation openings.

Do not allow water and liquid intrusion into the camera.

3. Operation and Daily Maintenance

Please shut down the device and then unplug the power cable before you begin any

maintenance work.

Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on

the lens surface.

Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth

Important Safeguards and Warning

Warning

Statement

This camera should be installed by qualified personnel only.

All the examination and repair work should be done by qualified personnel.

Any unauthorized changes or modifications could void the warranty.

This guide is for reference only.

Product, manuals and specifications may be modified without prior notice. Speco

Technologies reserves the right to modify these without notice and without incurring

any obligation.

Speco Technologies is not liable for any loss caused by improper operation.

Note:

Before installation, check the package and make sure that all components are included.

Contact your rep or Speco customer service department immediately if something is

broken or missing in the package.

dampened with a small quantity of neutral detergent. Finally use the dry cloth to clean

the device.

Please use a professional optical cleaning method to clean the enclosure. Improper enclosure

cleaning (such as using cloth) may result in poor IR functionality and/or IR reflection.

The grounding holes of the product are recommended to be grounded to further enhance

the reliability of the camera.

Dome cover is an optical device, please don't touch or wipe cover surface directly during

installation and use, please refer to the following methods if dirt is found:

Stained with dirt: Use oil-free soft brush or hair dryer to remove it gently.

Stained with grease or fingerprint: Use oil-free cotton cloth or paper soaked with alcohol

or detergent to wipe from the lens center outward. Change the cloth and wipe several

times if it is not clean enough.

Package

Overview

3 Overview

Screwdriver

Camera Quick start guide CD

3 Plastic screw

anchors

3 (PA 4screws ×25mm)

Audio input connector

4Mounting base

Ethernet connector

Reset

Micro SD card slot

Fixed screw

Microphone

Power connector

Drill template

* 1 It is recommended to install the water-proof connector for outdoor installations.

*2 DC 12V power supply is not required if a PoE switch or injector is used to power

the camera.

►Connecting Network Cable

①Loosen the nut from the main element.

②Run the network cable (without RJ 45 connector) through both

elements. Then crimp the cable with RJ 45 connector.

③Connect the cable to the water-proof connector. Then tighten the

nut and the main cover.

Water-proof connector

DC12V

External microphone

Installation

* Before you start, please make sure that the wall or ceiling is strong enough

to withstand three times the weight of the camera.

①

want to install the camera and then drill the screw hole and cab e

hole on the wall according to the drill template.

Attach the drill template of the camera to the place where you

Fixed Screw

Mounting Base

Enclosure

Camera Unit

Cover

(mm)

Ø4.5

Ø51.0

Ø91.6

44.2

38.2

② LLoosen the fixed screw to disassemble the camera. Then remove the

cover from the camera unit to insert the SD card. After that, install the

cover back to the camera unit and fix it firmly with the screws. (Note that

the cover should not be installed unevenly .)

③Route and connect the cables. T

ceiling or wall with the screws provided.

hen secure the mounting base to the

④ Install the camera unit and enclosure to the mounting base and then

adjust if necessary to obtain an optimum view angle. Finally, fasten

the camera with the fixed screw.

PA 4×25mm

3×

Web Operation and Login

IP Scanner can search for the device on the local network.

③In the device list, you can view the IP address, model number, and

MAC address of each device. Select the applicable device and double

click to open up the web viewer. You can also manually enter the IP

address in the address bar of the web browser.

●Operation

①Make sure that the camera and the PC are connected to the same

local network. The camera is set to DHCP by default.

②Install IP Scanner from the CD and run it after installation.

O4 VT 1N 5C:F2: 07 :2 4: 68:9A

The login interface is shown above. Default user name is admin and

password is 1234. After logging in, follow directions to install

applicable plugins.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Speco Sicherheitskamera Handbücher

Speco

Speco HD1B316 Bedienungsanleitung

Speco

Speco HTB10X Bedienungs- und Wartungsanleitung

Speco

Speco PROVIDEO CVC-627 Bedienungsanleitung

Speco

Speco O8VD1 Bedienungsanleitung

Speco

Speco CVC-610 Bedienungsanleitung

Speco

Speco O8FT1M Bedienungsanleitung

Speco

Speco VL-D7SCSFF Bedienungsanleitung

Speco

Speco O8FD1 Bedienungsanleitung

Speco

Speco CVC-320WP Bedienungsanleitung

Speco

Speco HT7040H Bedienungsanleitung

Speco

Speco O8VLD1 Bedienungsanleitung

Speco

Speco O4iT1M Bedienungsanleitung

Speco

Speco CVC646HR Bedienungsanleitung

Speco

Speco O2P12X Bedienungsanleitung

Speco

Speco HT-INTB4 Bedienungsanleitung

Speco

Speco O2P20X Bedienungsanleitung

Speco

Speco HT5100BPVFG Bedienungsanleitung

Speco

Speco LEDome Bedienungsanleitung

Speco

Speco CVC-607EXCM25 Bedienungsanleitung

Speco

Speco CVC-1700S Bedienungsanleitung

Speco

Speco HTBIR1M Bedienungsanleitung

Speco

Speco CCLR13D1G Bedienungsanleitung

Speco

Speco O4B6M Bedienungsanleitung

Speco

Speco O4VLD1 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung