Speco WDR-R3 Bedienungsanleitung

Wide Dynamic Range

Dome Camera

WDR-D3

Please read this manual thoroughly before operation and keep

it handy for further reference.

200 New Highway

Amityville, NY 11701

631-957-8700

www.specotech.com

WARNING & CAUTION

The lighting flash with an arrowhead symbol, within an equilateral triangle is

Intended to alert the user to the presence of un-insulated “dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons____________________________________

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (serving) instructions

in the literature accompanying the appliance__________________

INFORMATION -This equipment has been tested and found to company with

limits for a class a digital device Pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful

Interference When the equipments operated in a commercial environment.

This equipment generates, uses, and Can Radiate radio frequency energy and

if not installed and used in accordance with the instruction manual, may Cause

Harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which

Case the user will be required to correct the interference at his own expense.

WARNING – Change or modification not expressly approved by the manufacturer could void

the user’s authority to operate the equipment__________________________________

CAUTION : To prevent electric shock and risk of fire hazards.

DO NOT use power sources other than that specified.______

DO NOT expose this appliance to rain or moisture.000

This installation should be made by a qualified service person and should conform to all local codes.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE

REFER SERVICINGTO QUALIFIED

SERVICE PERSONNEL._______________

CAUTION

CAMERA INSTALLATION

CONNECT POWER CABLE

1. WHEN USING 12 VOLTS DC (constant voltage 600 mA)

2. WHEN USING 24 VOLTS AC (40 Volt Amps)

3. CONNECT VIDEO CABLE

-CONNECT BNC CABLE TO THE BNC JACK.

POWER SUPPLY

CONNECT

YELLOW:VIDEO OUT

CONNECT

BLACK:(-)

POWER RED(+)

POWER SUPPLY

POWER INPUT:RED

CENTER:(+)

CHAMELEON DOME INSTALLATION

3. If desired, place the Chameleon Dome over the WDR-D3

* Spray the Chameleon Dome with your desired color

* If necessary apply a second coat

* Painting method on Chameleon Dome

●Notes : If painting is desired, please do so before installation

Push the Chameleon Dome over the WDR-D3 until it snaps into

position.

INTERNAL COMPONENTS

1. Mechanical

(1) DC AUTO-IRIS LENS

Adjust between TÅÆW (TELE ÅÆ WIDE) to set the

angle (focal length) Set the focus by adjusting ∞ÅÆN

NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED

INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".

(2) JOY STICK

TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY

STICK FOR ONE SECOND AND SET AS DESCRIBED

IN THE MANUAL

(1) DC Auto iris

2.8~10mm Lens

(2) JOY STICK

2. Joy Stick

LEFT

DOWN

RIGHT

Push the Joy stick for one second, and the OSD appears

on the screen. Move the Joy Stick up, down, left & right to

control the OSD functions.

1. GENERAL INFORMATION

SAFETY PRECAUTION

■Do not open and modify

Do not open the cabinet except during maintenance and installation, as it may be dangerous and cause damage.

■Do not put objects inside the unit

Make sure that no metal objects or flammable substances get inside the camera. It could cause fire, short-circuits or

damages.

■Be careful when handling the unit

To prevent damage, do not drop the camera or subject it to strong shock or vibration

■Install away from electric or magnetic fields

■Protect from humidity and dust

■Protect from high temperature

Be careful when installing close to the ceiling, in a kitchen or boiler room, as the temperature may raise to high levels.

■Cleaning

Dirt can be removed from the cabinet only by wiping it with a soft cloth moistened with a soft detergent solution.

■Mounting Surface

The mounting surface material must be strong enough to secure the camera.

2. EXHIBIT

TIP FOR LOCATION OF THE CAMERA

Before sending the camera out for repair, check the items below. If the problem persists after checking these

items, contact your service center.

■If no image appears

Is the coaxial cable attached securely?

Are the power and voltage normal?

Has the iris of the lens inside the camera been adjusted correctly (with the level volume) ?

Is there adequate illumination?

■If the image is unclear

Is the lens in focus?

Is the lens dirty?

Dirt of fingerprints on the lens can adversely affect the images. Gently wipe any dirt or fingerprints off the lens

with a soft cloth or lens cleaning paper and cleaning fluid (commercially available).

Is the monitor adjusted correctly?

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

3. CAMERA FEATURES

PRODUCT FEATURE

1. High Resolution

It has 540 lines of horizontal resolution and 460 lines of vertical resolution. (540 HTVL equivalent)

2. Superior Wide Dynamic Image Quality

It has very Wide Dynamic Range by using Pixim ORCA Chip Set.

Film-like colors are described under various Light conditions even in high dynamic range scenes

Dynamic Range is greater then 120 dB.

3. Digital Pixel System

Each pixel is processed independently to get clear and usable images.

4. Various Lens Choices

it offers flexibility of the lens from board mount to C/CS mount lens with manual and

DC auto-iris control.

5. Power Source

DUAL VOLTAGE (12VDC or 24VAC)

6. OSD control

Every function is controlled by OSD menu

- Automatic white balance

- Automatic gain control (max 60dB)

- Slow shutter, AGC on/off

- Line lock phase control

- Lens type control

- Auto exposure control

7. Synchronization

Both Internal Synchronization and External Synchronization is provided.

8. Camera ID

The title that indicated on Monitor can be appointed.

9. NTSC/PAL Selectable

NTSC or PAL is selectable by simple switch is one camera

4. CAMERA SPECIFICATION

48dB or moreS/N Ratio

1.0Vp-p/75 ohm Composite

Video Output

742(H) x 552(V)Total of pixels

under 95% Non-condensingStorage Humidity

Under 90% Non-condensingOperating Humidity

-10°C ~ 50°COperating Temperature

-20°C ~ 70°CStorage Temperature

DC 12V (8V - 18V), AC 24V {(20V - 30V)option}Supplied Voltage

Max 2.7WPower Consumption

4-directional Swith with a center Push TACT SwitchOSD Menu Control

0 - 60dBAGC Control

C/CS mountLens Mount

1/60 - 1/100,000 / 1/50 - 1/100,000Shutter Speed

120dB(max), 95dB(typical)Dynamic range

0.08Lux (DSS on) with F1.2 LensSensitivity

DC Lens, Video Lens, Manual LensIris Control

Internal / ExternalSynchronization

525 Iines interlaced / 625 Iines interlacedScanning System

520 Horizontal TV Lines (color)Horizontal Resolution

1/3 inch CMOS (dramatically Dynamic range sensor)Pick-up Device

NTSC / PALSignal System

Inhaltsverzeichnis

Andere Speco Sicherheitskamera Handbücher

Speco

Speco CLPR66B4B Bedienungsanleitung

Speco

Speco O6MDP3 Bedienungsanleitung

Speco

Speco Focus Free Intensifier HT7248FFiL Bedienungsanleitung

Speco

Speco IP-INTB1 Bedienungsanleitung

Speco

Speco LPRD922 Bedienungsanleitung

Speco

Speco O4B6 Bedienungsanleitung

Speco

Speco CVC-927PTZ Bedienungsanleitung

Speco

Speco HTD8FFI Bedienungsanleitung

Speco

Speco HT-7815DNV Bedienungsanleitung

Speco

Speco CVC-130R Bedienungsanleitung

Speco

Speco O4VT1 Bedienungsanleitung

Speco

Speco Intensifier VLINTT5 Bedienungsanleitung

Speco

Speco INTENSIFIER HTINTB10 Bedienungsanleitung

Speco

Speco o2vld5 Bedienungsanleitung

Speco

Speco HDT471 Bedienungsanleitung

Speco

Speco HT650PT10X Bedienungsanleitung

Speco

Speco VLD2A Bedienungsanleitung

Speco

Speco VLEDT2W Series Bedienungsanleitung

Speco

Speco CVC-5715DNVW Bedienungsanleitung

Speco

Speco HT - INTB8/9/10 Bedienungsanleitung

Speco

Speco O4P4 Bedienungsanleitung

Speco

Speco HT7040K Bedienungsanleitung

Speco

Speco ProVideo CVC-6705 Bedienungsanleitung

Speco

Speco ProVideo CVC-980IR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung