Spektrum AR635 Bedienungsanleitung

AR635 User Guide

AR635 Bedienungsanleitung

Guide de l‘utilisateur - AR635

AR635 Guida dell‘utente

The following terms are used throughout the product literature to indicate

various levels of potential harm when operating this product:

NOTICE: Procedures, which if not properly followed, create a possibility

of physical property damage AND a little or no possibility of injury.

CAUTION: Procedures, which if not properly followed, create the prob-

ability of physical property damage AND a possibility of serious injury.

WARNING: Procedures, which if not properly followed, create the prob-

ability of property damage, collateral damage, and serious injury OR

create a high probability of superﬁcial injury.

NOTICE

All instructions, warranties and other collateral documents are subject

to change at the sole discretion of Horizon Hobby, Inc. For up-to-date

product literature, visit horizonhobby.com and click on the support tab

for this product.

Meaning of Special Language

WARNING: Read the ENTIRE instruction manual to become familiar

with the features of the product before operating. Failure to operate

the product correctly can result in damage to the product, personal prop-

erty and cause serious injury.

This is a sophisticated hobby product. It must be operated with caution

and common sense and requires some basic mechanical ability. Failure to

operate this Product in a safe and responsible manner could result in injury

or damage to the product or other property. This product is not intended

for use by children without direct adult supervision. Do not attempt disas-

sembly, use with incompatible components or augment product in any way

without the approval of Horizon Hobby, Inc. This manual contains instruc-

tions for safety, operation and maintenance. It is essential to read and

follow all the instructions and warnings in the manual, prior to assembly,

setup or use, in order to operate correctly and avoid damage or

serious injury.

WARNING AGAINST COUNTERFEIT PRODUCTS

Always purchase from a Horizon Hobby, Inc. authorized dealer

to ensure authentic high-quality Spektrum product. Horizon Hobby,

Inc. disclaims all support and warranty with regards, but not limited to,

compatibility and performance of counterfeit products or products claiming

compatibility with DSM or Spektrum technology.

Age Recommendation: Not for children under 14 years.

This is not a toy.

NOTICE: This product is only intended for use with unmanned, hobby-

grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims

all liability outside of the intended purpose and will not provide warranty

service related there to.

WARRANTY REGISTRATION

Visit www.spektrumrc.com/registration today to register your product.

AR635 User Guide

The AR635 combines the breakthrough performance of AS3X®technology

with a Spektrum™6-channel, 2048 receiver. This combination along with

Quique Somenzini’s perfection of simple programming logic and tuned ﬂight

stabilization provides the ultimate in performance and simple installation.

The AR635 is perfect for Park ﬂyer aircraft to 90-sized electric aircraft. The

AR635 is not to be used with nitro, gas, or turbine-powered aircraft. While the

AR635 provides maximum agility and precision for intermediate and profes-

sional pilots, it is not a ﬂying aid for beginners. The AR635 AS3X electronic

enhancement system makes it possible for you to experience super-smooth

ﬁght performance, yet still have full control authority for sport or 3D ﬁght.

Turbulence, torque and tip stalls are just some of the many complications

to assess when trying to achieve smooth ﬁght. The AS3X System invisibly

helps with complicated corrections, allowing you to experience ultra smooth

ﬂight performance that feels so natural, you’ll quickly build conﬁdence in the

capability of the airplane. The AR635 setup is easy. Just bind your compat-

ible Spektrum, JR®or 2.4GHz DSM2®/DSMX®technology transmitter to your

AR635 to innovate the way you’ll want to ﬂy now and in the future.

NOTICE: The AR635 receiver is not compatible with the DX6 park ﬂyer

radio system.

Features

• A unique design in cooperation with Spektrum and Quique Somenzini

• Integrated AS3X technology

• Simple programming logic

• Flight stabilization programming tuned by Quique Somenzini

• 3-axis gain adjustment

• Computer and non-computer radio compatible

• 2048 Resolution)

• 22 ms operation

Applications

Park ﬂyer - .90 size Electric Aircraft ONLY.

CAUTION: Do not use the AR635 receiver in nitro, gas or turbine-

powered aircraft or in electric aircraft larger than .90-size. Doing so may

cause damage to the aircraft and result in property damage or injury.

Always read and follow all instructions to properly program the AS3X

system.

Red LED Ailerons

(Roll) Hold LED

Antenne

Bind LED (internal)

Antenne

Blue LED Elevator

(Pitch)

Green LED Rud-

der (Yaw)

ReceiverInstallation

Make sure the receiver is mounted ﬁrmly and cannot move during aircraft

maneuvers or loosen in the event of harmonic vibration. We recommend

securing the receiver with high-quality, double-sided tape.

You can install the receiver longitudinally (inverted or upright) in a low

vibration position; however, the servo connector pins must always point

toward the front or rear of the aircraft.

ONLY install the receiver into your aircraft in the

following oriantations.

CAUTION: If AS3X is active and the receiver is not installed correctly,

the aircraft will crash.

Antenna Polarization

For optimum RF link performance, mount the antennas in an orientation

that allows for the best possible signal reception when the aircraft is in

all possible attitudes and positions. Orient the internal receiver antennas

perpendicular to each other.

AR635 Speciﬁcations

Type: .................................................................DSM2/DSMX AS3X receiver

Channels: ..........................................................6

Modulation: ......................................................DSM2/DSMX

Dimension: .......................................................(WxLxH): 22 x 56 x 14 mm

Weight: ..............................................................13.2 g

Input Voltage Range: .......................................3.5 to 8.5V

Resolution: .......................................................2048

Compatibility: ...................................................All DSM2/DSMX aircraft

transmitters

Hold Indicator

The AR635 features a red LED (Indicated by H). This LED

indicates the number of holds that have occurred since

the receiver was last powered on. The LED will ﬂash the

number of holds, then pause (e.g., ﬂash, ﬂash, ﬂash, pause,

ﬂash, ﬂash, ﬂash, pause) This indicates three holds. Holds

are reset to zero when the receiver is turned off.

During the ﬁrst ﬂights of a new airplane, it’s recommended

to check the red LED hold indicator.

If it’s ﬂashing, it’s important to optimize the installation

(move or reposition antennas) until no hold occurs. On later

ﬂights, the LED Hold Indicator can be used to conﬁrm RF

link performance.

Servo Selection

Select servos that are adequate for AS3X operation. The servos must be

digital, high speed and high resolution. A poor servo/linkage geometry

combination will cause several issues, including oscillations and

unwanted reaction.

Y-Harnesses and Servo Extensions

Do not use ampliﬁed Y-harnesses and servo extensions with Spektrum

equipment. Only use standard, non-ampliﬁed Y-harnesses and servo exten-

sions. When converting existing models to Spektrum devices, replace all

ampliﬁed Y-harnesses and servo extensions.

Setting Up the Transmitter

Non-Computer Transmitter

We recommend enabling Exponential (if available) and using high rates with

Non-Computer transmitters for the best performance. If you need to use

low rates, or need to disable Exponential to match your ﬂying style, you can

do so without affecting the performance of the AS3X system.

Computer Transmitter

Total Servo travel MUST be set to 125%. Changing the servo total travel

from 125% will affect the tuning and performance of the AS3X technology.

Always mechanically adjust the aircraft linkages for less control surface

throw while maintaining 125% servo travel.

If you choose to use transmitter Dual Rates, NEVER use a value lower than

50%. Doing so will severely affect the performance of the receiver. If you are

using a computer transmitter, we recommend using the following values:

• Servo Travel: 125% on Aileron, Elevator and Rudder

• Dual Rate: Maximum of 100% and a minimum of 50%

• Exponential: 20% on Aileron, Elevator and Rudder

CAUTION: The AR635 is not compatible with Delta, V-tail, or Flaperon

mixing. If using dual ailerons, elevator or rudder, a Y harness must be used.

IMPORTANT: The Dual Rate value must be between 50% and 100%. Expo-

nential can be adjusted to best ﬁt your ﬂying style.

Binding

You must bind the receiver to the transmitter before the receiver will oper-

ate. Binding is the process of programming the receiver to recognize the

GUID (Globally Unique Identiﬁer) code of a single speciﬁc transmitter. To

bind the AR635 receiver to a DSM2 or DSMX transmitter:

1. Insert the bind plug in the BIND port on the

receiver.

2. Power on the receiver. The receiver can be powered

through any open port. The bind LED on the receiver

ﬂashes, indicating the receiver is in bind mode.

To bind the receiver using an electronic speed

controller, insert the bind plug into the BIND port in

the receiver and the ESC lead into the throttle

(THRO) port.

3. Keep the plane motionless for 5 seconds.

4. Move the throttle stick to the low throttle position.

5. Put your transmitter in Bind Mode. The system connects within a few

seconds. Once connected, the orange LED light turns solid and the

AR635 receiver begins the initialization process. At this point, the gain

lights should be ﬂashing at the preset gain values.

6. After setting up your model, rebind the system so the true low throttle

position is set in the failsafe.

7. Remove the bind plug from the BIND port on the receiver before you

power off the receiver and transmitter. Store the bind plug in a

convenient place.

NOTICE:

Always remove the bind plug to prevent the system from entering

bind mode the next time you power on the receiver.

The ESC will not arm if the throttle control is not put at the lowest position.

If you encounter problems, follow the binding instructions and refer to the

transmitter troubleshooting guide for other instructions. If needed, contact the

appropriate Horizon Product Support ofﬁce.

AR635 with bind plug

inserted

Receiver Setup Procedure

The Spektrum AR635 receiver offers LED programming and the following

adjustable features:

• 3D Airplane: Non-Computer transmitter

• 3D Airplane: Computer transmitter

• Sport Airplane: All Transmitters

If you select a 3D Airplane transmitter, 5 channels are available for aircraft

controls. The Gear channel is reserved for Flight Modes. The Sport Airplane

transmitter selection enables you to use all 6 channels; Flight Modes for

Gear Up and Gear Down are activated by the Gear channel.

After you select the transmitter type, complete a control direction test

to ensure the control surfaces are moving in the correct direction. Any

necessary channel reversing is done at this time in the transmitter. It

is extremely important to complete the control direction test before

proceeding to gain adjustment. The gain adjustment controls are dependent

on the transmitter channel reverse values.

Once you enter the Gain Control menus, use three LED lights to navigate the

menu options. Thoroughly review the Gain Control section before attempting

to change any gain values in the receiver. The color of the LED indicates the

active axis (Aileron, Elevator or Rudder), while the LED pattern (On, Off or

Flashing) will help you navigate the menu and gain values.

Enter Transmitter Type

Computer and Non-Computer Radios

The AR635 receiver is compatible with both “non-computer” as well as

“computer” radios. Each receiver mode (3D Non-Computer, 3D Computer

or Sport all transmitters) stores the speciﬁc gain values for each transmitter

type. The designation of “non-computer” and “computer” radio is deter-

mined by the travel adjust capabilities of the transmitter. All radios capable

of at least 125% servo travel are grouped in the “computer radio” section.

Radios with less than 125% servo travel are grouped in the “non-computer

radio” section.

NOTICE: Be sure the transmitter binds to the receiver and check basic func-

tions. Once basic function is established, the receiver can be powered off.

3D Non-Computer:

1. With the transmitter powered ON, move the throttle stick to the

middle position.

2. Hold full Left Aileron and full Down Elevator while powering on the

receiver. After 5 seconds, the red and blue LEDs in the receiver turn solid,

indicating that you have successfully entered 3D Non-Computer

Radio mode.

3. Release the transmitter stick(s).

Entering Transmitter Type by Stick Combination:

IMPORTANT: Aileron and Elevator Reversing must be set to Normal/Normal

Non-Computer Transmitters: 3D

Mode 1Mode 2

IMPORTANT: General Flight mode and 3D mode are toggled using the Gear

switch (DX4e AUX switch).

EXIT MENU: Move the controls to neutral, then throttle full down to exit the

menu. The ESC will regain control.

3D Computer:

1. With the transmitter powered ON, move the throttle stick to the

middle position.

2. Hold full Right Aileron and full Down Elevator while powering on the

receiver. After 5 seconds, the blue and green LEDs in the receiver turn

solid, indicating that you have successfully entered 3D Computer

Radio mode.

3. Release the transmitter stick(s).

Entering Transmitter Type by Stick Combination:

IMPORTANT: Aileron and Elevator Reversing must be set to Normal/Normal

Computer Transmitters: 3D

Mode 1Mode 2

IMPORTANT: General Flight mode and 3D mode are toggled using the

Gear switch.

EXIT MENU: Move the controls to neutral, then throttle full down to exit the

menu. The ESC will regain control.

Sport Mode, All Transmitters:

1. With the transmitter powered ON, move the throttle stick to the

middle position.

2. Hold full Left Aileron and full Up Elevator while powering on the receiver.

After 5 seconds, the green, blue, and red LEDs in the receiver turn solid,

indicating that you have successfully entered Sport mode.

3. Release the transmitter stick(s).

Entering Transmitter Type by Stick Combination:

IMPORTANT: Aileron and Elevator Reversing must be set to Normal/Normal

All Transmitters: Sport

Mode 1Mode 2

IMPORTANT: Two gain banks are toggled using the Gear switch (DX4e AUX

switch).

EXIT MENU: Move the controls to neutral, then throttle full down to exit the

menu. The ESC will regain control.

Enter Gain Control

To access the Gain Control Mode, the transmitter must use a speciﬁc stick

combination. With the transmitter powered ON, hold the sticks as shown in

the chart below while powering on the receiver.

Entering Gain Control by Stick Combination:

Aileron / Elevator

Reversing Mode 1 Mode 2

Aileron Elevator

Andere Handbücher für AR635

Inhaltsverzeichnis

Andere Spektrum Fernbedienung Handbücher

Spektrum

Spektrum DX9 Bedienungsanleitung

Spektrum

Spektrum DX2S Bedienungsanleitung

Spektrum

Spektrum DX3.0 Bedienungsanleitung

Spektrum

Spektrum DX7 Bedienungsanleitung

Spektrum

Spektrum PowerSafe AR9130T Bedienungsanleitung

Spektrum

Spektrum SLT3 3CH Bedienungsanleitung

Spektrum

Spektrum DX3S Bedienungsanleitung

Spektrum

Spektrum DX7 Bedienungsanleitung

Spektrum

Spektrum 5-Channel Full Range DSM2 2.4GHz Radio... Bedienungsanleitung

Spektrum

Spektrum DX6I Betriebsanleitung

Spektrum

Spektrum DX8G2 Bedienungsanleitung

Spektrum

Spektrum ix20 Bedienungsanleitung

Spektrum

Spektrum DX8 Bedienungsanleitung

Spektrum

Spektrum DX Series Bedienungsanleitung

Spektrum

Spektrum DX6 Bedienungsanleitung

Spektrum

Spektrum DX3 Bedienungsanleitung

Spektrum

Spektrum DX6I Bedienungsanleitung

Spektrum

Spektrum DX8 Bedienungsanleitung

Spektrum

Spektrum DX5e Bedienungsanleitung

Spektrum

Spektrum DX18 Bedienungsanleitung

Spektrum

Spektrum BEASTX AR7210BX Bedienungsanleitung

Spektrum

Spektrum DX5C Bedienungsanleitung

Spektrum

Spektrum DX18t Bedienungsanleitung

Spektrum

Spektrum NX7e Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung