Spirax Sarco UFT32 Bedienungsanleitung

Local regulations may restrict the use of this product to below the conditions quoted.

Page 1 of 5

UFT32

Sealed Stainless Steel Ball Float Steam Trap

(for use with Pipeline Connectors)

TI-P146-05

CMGT Issue 6

Description

The UFT32 is an austenitic stainless steel maintenance free sealed ball float steam trap with an integral automatic air venting facility.

It is designed for differential steam pressures up to 32 bar.

When installed with a suitable pipeline connector the UFT32 can easily and simply be removed without breaking into the pipeline, thus

speeding up trap replacement with minimal system downtime. Pipeline connectors are available with screwed, socket weld and flanged

end connections.

Capsule

The BP99/32 capsule which is used in the UFT32 is suitable for use on 150 °C superheat @ 0 bar g and 50 °C superheat @ 32 bar g.

Standards

The body to cover welded joint complies with ASME Section IX and BS/EN 288.

This product fully complies with the requirements of the Pressure Equipment Directive (PED).

Certification

This product is available with certification to EN 10204 3.1.

Note: All certification/inspection requirements must be stated at the time of order placement.

Pipeline connector options

The UFT32 can be fitted to a variety of pipeline connectors including:

PC10HP Straight connector ASME 600 (TI-P128-10)

PC20 Straight connector with 'Y' type strainer ASME 300 (TI-P128-15)

IPC21 Straight connector with 'Y' type strainer and integral Spiratec sensor ASME 300 (TI-P128-15)

PC3 _ Straight connector with one piston isolation valve ASME 600 (TI-P128-02)

PC4 _ Straight connector with two piston isolation valves ASME 600 (TI-P128-03)

S TS17. 2 Steam trap station (TI-P128-22)

See the relevant Technical Information sheet as listed above for details of the connections available for each pipeline connector.

UFT32 fitted to a PC4_ connector

UFT32 fitted to a PC3_ connector

TI-P146-05

CMGT Issue 6

Page 2 of 5

UFT32 Sealed Stainless Steel Ball Float Steam Trap (for use with Pipeline Connectors)

Temperature °C

Pressure bar g

Steam saturation curve

The product must not be used in this region.

The product should not be used in this region or beyond its operating range as damage to the internals may occur.

Note: The model of pipeline connector and connections selected will dictate the maximum operating limits of the complete assembly.

Reference the specific pipeline connector Technical Information sheet as detailed in 'Pipeline connector options'.

Body design conditions PN50 (ASME 300)

PMA Maximum allowable pressure 50 bar g @ 38 °C

TMA Maximum allowable temperature 400 °C @ 28 bar g

Minimum allowable temperature -48 °C

PMO Maximum operating pressure for saturated steam service 32 bar g

TMO Maximum operating temperature 286 °C @ 29 bar g

Minimum operating temperature

Note: For lower operating temperatures consult Spirax Sarco 0 °C

DPMX Maximum differential pressure

UFT32-4.5 4.5 bar

UFT32-10 10 bar

UFT32-14 14 bar

UFT32-21 21 bar

UFT32-32 32 bar

Designed for a maximum cold hydraulic test pressure of: 50 bar g

Pressure/ temperature limits (ISO 6552)

Page 3 of 5

UFT32 Sealed Stainless Steel Ball Float Steam Trap (for use with Pipeline Connectors)

TI-P146-05

CMGT Issue 6

No. Part Material

1Body Austenitic stainless steel 304 EN 10213-4 1.4308;

ASTM A351 CF8

2Cover Austenitic stainless steel 304 EN 10028-7 1.4301;

ASTM A240 Gr. 304

3Connector screws Steel ASTM A193 B7

4Flange Alloy steel - ELNP ASTM A193 B7

5* Inlet gasket Graphite/Stainless steel laminate

6* Outlet gasket Graphite/Stainless steel laminate

7Main valve seat Stainless steel EN10088-3 1.4057

8Main valve/air vent seat gasket Stainless steel EN10088-2 1.4307

9Main valve assembly screws Stainless steel BS EN ISO3506 Cl A2

10 Ball float and lever Stainless steel EN10088-2 1.4301

11 Air vent assembly Stainless steel

12 Pivot frame Stainless steel EN10088-3 1.4057

13 Pivot pin Stainless steel

* Note: Items 5 and 6 are shown clearly in the spares drawing overleaf.

Dimensions/weight (approximate) in mm and kg

ABCWeight

168.5 94 47 2.02

UFT32 fitted to a PC10HP connector

Materials

107 2914

B A

TI-P146-05

CMGT Issue 6

Page 4 of 5

UFT32 Sealed Stainless Steel Ball Float Steam Trap (for use with Pipeline Connectors)

Safety information, installation and maintenance

For full details see the Installation and Maintenance Instructions (IM-P146-01) supplied with the product.

Installation note:

The UFT32 can be installed on any pipeline connector, but must be installed in a horizontal plane with the ‘TOP’ label facing

upwards See separate Installation and Maintenance Instructions for Spirax Sarco pipeline connectors (IM-P128-06, IM-P128-11

and IM-P128-13).

Disposal

The UFT32 trap unit is manufactured from stainless steel and is therefore totally recyclable. No ecological hazard is anticipated with

the disposal of this product provided due care is taken.

How to specify

Steam traps shall be sealed ball float traps UFT32 type suitable for a differential operating pressure of either 4.5, 10, 14, 21 or 32 bar.

Traps to be zero maintenance and be connected to a separate pipeline connector by two screws to allow for quick and simple installation/

replacement.

For example Spirax Sarco UFT32-32 ball float steam trap.

How to order

The UFT32 is supplied as follows:-

1. The swivel pipeline connector

PC10HP Standard connection

PC20 One integral ISO valve plus 'Y' type strainer

IPC21 One integral ISO valve plus 'Y' type strainer and Spiratec sensor

PC3

_One integral ISO valve

PC4

_Two integral ISO valves

2. The STS17.2 steam trap station

3. The UFT32 trap complete with inner and outer gaskets and two connector screws. These items will be supplied in a protective box.

Note: Any optional extras need to be specified at the time of order placement.

How to order example:

1 off Spirax Sarco DN20 PC10HP pipeline connector with socket weld connections.

1 off DN20 STS17 steam trap station having socket weld connections.

and/or if you are ordering a replacement for an existing unit:

1 off Spirax Sarco UFT32-21 sealed stainless steel ball float steam trap.

plus

1 off Spirax Sarco insulating jacket to fit a UFT32.

Please note: The above items are to be supplied with connector screws and gaskets.

Capacities (in accordance with ISO 7842)

Note: Capacities shown are based on discharge at saturation

temperature. When discharging sub-cooled condensate the air

vent provides extra capacity. Under start-up conditions the

thermostatic air vent will be open, and will provide additional

condensate capacity to the main valve assembly. This will provide

a minimum of 100% increased capacity above the hot condensate

figures shown.

For example:

A UFT32-14 has a hot condensate capacity of 195 kg/h at 5 bar

differential. The cold start-up capacity will be a minimum of

390 kg/h.











      





















Differential pressure bar (x 100 = kPa)

Condensate kg/h

Page 5 of 5

UFT32 Sealed Stainless Steel Ball Float Steam Trap (for use with Pipeline Connectors)

TI-P146-05

CMGT Issue 6

365

Spare parts

The UFT32 is a sealed non-maintainable trap unit. No internal spares are available.

The spares that are available are shown in solid outline. Parts shown in a grey line are not available as spares.

Available spares

Connector screws (x 2) 3

Complete UFT32 trap unit inclusive of gaskets and connector screws (3)

How to order spares

Always order spare parts by using the description given in the column headed 'Available spares' and state the size, model no. and

pressure rating of the trap.

Example: 2 x Connector screws for a Spirax Sarco UFT32

sealed stainless steel ball float steam trap (for use with pipeline connectors).

UFT32

trap unit and gaskets

Recommended tightening torques

Item Part or

mm N m

3Connector screws " A/F 33

Andere Handbücher für UFT32

Inhaltsverzeichnis

Andere Spirax Sarco Steuereinheit Handbücher

Spirax Sarco

Spirax Sarco RJ216Z Bedienungsanleitung

Spirax Sarco

Spirax Sarco FTC62 Bedienungsanleitung

Spirax Sarco

Spirax Sarco DCV1 Bedienungsanleitung

Spirax Sarco

Spirax Sarco BSA3HP Bedienungsanleitung

Spirax Sarco

Spirax Sarco HL 17 Bedienungsanleitung

Spirax Sarco

Spirax Sarco 25BP Bedienungsanleitung

Spirax Sarco

Spirax Sarco ADV Series Bedienungsanleitung

Spirax Sarco

Spirax Sarco DP143 Bedienungsanleitung

Spirax Sarco

Spirax Sarco Spira-trol KE73 Bedienungsanleitung

Spirax Sarco

Spirax Sarco DP17 Bedienungsanleitung

Spirax Sarco

Spirax Sarco DP27 Bedienungsanleitung

Spirax Sarco

Spirax Sarco DCV4 Bedienungsanleitung

Spirax Sarco

Spirax Sarco M33 ISO Series Bedienungsanleitung

Spirax Sarco

Spirax Sarco LCV6 Bedienungsanleitung

Spirax Sarco

Spirax Sarco TD120 Bedienungsanleitung

Spirax Sarco

Spirax Sarco M10Si Automation Bedienungsanleitung

Spirax Sarco

Spirax Sarco M15 Series Bedienungsanleitung

Spirax Sarco

Spirax Sarco MkII Leitfaden

Spirax Sarco

Spirax Sarco 25E Bedienungsanleitung

Spirax Sarco

Spirax Sarco SV615 Bedienungsanleitung

Spirax Sarco

Spirax Sarco K Series Bedienungsanleitung

Spirax Sarco

Spirax Sarco HP70 Series Bedienungsanleitung

Spirax Sarco

Spirax Sarco Spira-trol K Series Bedienungsanleitung

Spirax Sarco

Spirax Sarco 58 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung