Spirit Z9 Bedienungsanleitung

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE

OPERATING YOUR NEW TREADMILL!

Z100 / Z300 Z500 Z700

OWNER’S MANUAL

Product Registration…………………………………………………………………………. 2

Important Safety Instructions…………………………………………………………………3

Important Electrical Information………………………………………………………………4

Important Operation Instructions……………………………………………………………..5

Assembly Instructions………………………………………………………………………….6

Folding Instructions…………………………………………………………………………….7

Operation of Your New Treadmill…………………………………………………………….8

Programmable Operation………………………………………………………………………10

Target Heart Rate………………………………………………………………………………14

Using a Heart Rate Transmitter……………………………………………………………….15

Heart Rate Control Operation…………………………………………………………………16

Maintenance of Your New Treadmill………………………………………………………….17

Service Checklist -Diagnosis Guide………………………………………………………….19

Manufacturer’s Limited Warranty……………………………………………………………….20

Table of Contents

ATTENTION-THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY

AND IS WARRANTED FOR THAT APPLICATION. ANY OTHER APPLICATION

VOIDS THIS WARRANTY IN ITS ENTIRETY.

Thank you for your purchase of this quality treadmill from Spirit Manufacturing,

Inc. Your new treadmill was manufactured by one of the leading fitness

manufacturers in the world and is backed by one of the most comprehensive

warranties available. Through your dealer, Spirit will do all we can to make your

ownership experience as pleasant as possible for many years to come. The local

dealership where you purchased this treadmill is your administrator for all Spirit

warranty and service needs. Their responsibility is to provide you with the

technical knowledge and service personnel to make your experience more

informed and any difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their

telephone number, and the date of purchase below to make any future, needed

contact easy. We appreciate your support and we will always remember that you

are the reason that we are in business. Please complete and mail your

registration card today and enjoy your new treadmill.

Yours in Health,

Spirit Manufacturing, Inc.

Name of Dealer______________________________________

Telephone Number of Dealer___________________________

Purchase Date_______________________________________

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below.

Serial Number_______________________________________

The self-addressed product registration card must be completed in full and returned to

Spirit Manufacturing, Inc or visit www.spiritfitness.com to register online.

CONGRATULATIONS ON YOUR

NEW TREADMILL AND WELCOME

TO THE SPIRIT FAMILY!

Product Registration

WARNING -Read all instructions before using this appliance.

DANGER -To reduce the risk of electric shock disconnect your Spirit treadmill

from the electrical outlet prior to cleaning and/or service work.

WARNING -To reduce the risk of burns, fire, electric shock, or injury to persons,

install the treadmill on a flat level surface with access to a 120-volt, 20-amp

grounded outlet.

DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE

GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY

THE CORD SET. A serious shock or fire hazard may result along with computer

malfunctions. See Grounding Instructions, page 4.

•Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both

carpet and treadmill may result.

•Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance

between the rear of the treadmill and any fixed object.

•Keep children away from the treadmill. There are obvious pinch points and other

caution areas that can cause harm.

•Keep hands away from all moving parts.

•Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not

working properly, call your dealer.

•Keep the cord away from heated surfaces.

•Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous

environment.

•Never drop or insert any object into any openings.

•Do not use outdoors.

•To disconnect, turn all controls to the off position, remove tether cord, then remove

the plug from the outlet.

•Do not attempt to use your treadmill for any purpose other than for the purpose it is

intended.

•The pulse sensors are not medical devices. Various factors, including the user’s

movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

•Use handrails provided; they are for your safety.

•Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your treadmill. Quality athletic shoes are recommended to avoid leg

Important Safety Instructions

fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS -THINK SAFETY!

WARNING!

•NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.

Route the power cord away from any moving part of the treadmill including the elevation

mechanism and transport wheels.

•NEVER remove any cover without first disconnecting AC power.

•If voltage varies by ten percent (10%) or more, the performance of your treadmill may

be affected. Such conditions are not covered under your warranty. If you suspect

the voltage is low, contact your local power company or a licensed electrician for proper

testing.

•NEVER expose this treadmill to rain or moisture. This product is NOT designed for

use outdoors, near a pool or spa, or in any other high humidity environment.

This product must be grounded. If the treadmill should malfunction or breakdown,

grounding provides a path of least resistance for electric current,reducing the risk of

electric shock. This product is equipped with a cord having an equipment-grounding

plug. The plug must be plugged into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

DANGER -Improper connection of the equipment-grounding conductor can result

in a risk of electric shock. Check with a qualified electrician or serviceman if you

are in doubt as to whether the product is properly grounded. Do not modify the

plug provided with the product if it will not fit the outlet, have a proper outlet

installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks

like the plug illustrated in sketch A. A temporary adapter that looks like the adapter

illustrated in sketches B and C may be used to connect this plug to a 2-pole receptacle

as shown in sketch B if a properly grounded outlet is not available. The temporary

adapter should be used only until a properly grounded outlet (sketch A) can be installed

by a qualified electrician. The green colored rigid ear-lug, or the like, extending from the

adapter,must be connected to a permanent ground such as a properly grounded outlet

box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Important Electrical Information

Grounding Instructions

Grounded Outlet

Grounding Pin

Grounded Outlet Box

Metal Screw

Adapter

Tab of

Grounding

Screw

•NEVER operate this treadmill without reading and completely understanding the

results of any operational change you request from the computer.

•Understand that changes in speed and incline do not occur immediately. Set your

desired speed on the computer console and release the adjustment key. The

computer will obey the command gradually.

•NEVER use your treadmill during an electrical storm. Surges may occur in your

household power supply that could damage treadmill components.

•Use caution while participating in other activities while walking on your treadmill; such

as watching television, reading, etc. These distractions may cause you to lose

balance or stray from walking in the center of the belt; which may result in serious

injury.

•NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills start

at a very low speed and it is unnecessary to straddle the belt during start up. Simply

standing on the belt during slow acceleration is proper after you have learned to

operate the unit.

•Always hold on to a handrail or hand bar while making control changes (incline,

speed, etc.).

Do not use excessive pressure on console control keys. They are precision set to

function properly with little finger pressure. Pushing harder is not going to make the unit

go faster or slower. If you feel the buttons are not functioning properly with normal

pressure contact your Spirit dealer.

A safety tether cord is provided with this unit. It is a simple magnetic design that should

be used at all times. It is for your safety should you fall or move too far back on the

tread-belt.

Pulling this safety tether cord will stop tread-belt movement.

To Use:

1. Place the magnet into position on the round metal portion of the console control head.

Your treadmill will not start and operate without this. Removing the magnet also secures

the treadmill from unauthorized use.

2. Fasten the plastic clip onto your clothing securely to assure good holding power.

Note: The magnet has strong enough power to minimize accidental, unexpected

stopping.The clip should be attached securely to make certain it does not come off. Be

Important Operation Instructions

Safety Tether Cord

familiar with its function and limitations. The treadmill will stop, depending on speed,

with a one to two step coast anytime the magnet is pulled off the console. Use the red

Stop / Pause switch in normal operation.

ASSEMBLYPACK CHECK LIST

5/16"x 1/2" Button Head Socket Screw (14 pcs)

5/16”x 18 x 1.5T Flat Washer (6pcs)

5/16”x 23 x 1.5T Curve Washer (2pcs)

Safety Key (1pc)

Lubricant (1pc)

M5 Allen Wrench (1pc)

M6 Allen Wrench (1pc)

Assembly

•STEP 1

Remove all parts from the carton.

•STEP 2

Connect Computer Cable (middle) with Computer cable (lower).

•STEP 3

Hand tighten the Left and Right Handrails into the Base with 8pcs of 5/16” x 1/2”

Button Head Socket Screws, 6pcs of 5/16” x 18 x1.5T Flat Washersand 2pcs of

5/16”x 23x1.5T Curve Washers by using the M5 Allen Wrench.

•STEP 4

Connect Speed Adjustment Switch w/Cable with Speed Cable (middle).

And connect Incline Adjustment Switch w/Cable with Incline Cable (middle).

•STEP 5

Hand tighten the Left and Right Handrails with 4pcs of 5/16” x 1/2” Button Head

Socket Screws by using the M5 Allen Wrench.

•STEP 6

Connect 12 pin 1300 mm Computer Cable (middle)with 12 pin 800 mm Computer

cable (upper).

Connect Speed Cable (middle)with Speed Cable (upper) and Incline Cable (middle)

Assembly Instructions (Z9)

with Incline Cable (upper).

•STEP 7

Install the Console onto the Left and Right Handrails with 2pcs of 5/16” x 1/2” Button

Head Socket Screws by using the M5 Allen Wrench.

•PLEASE LOCK DOWN ALL HARDWARE AFTER THE

ACCESSSORIES HAVE BEEN ASSEMBLED.

Do not attempt to move the unit unless it is in the folded and locked position. Be sure the

power cord is secured to avoid possible damage. Use both handrails to maneuver the unit

to the desired position.

•To Fold The Treadmill:

Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it

is secured by the locking telescoping tube assembly in center back of base.

•To Unfold The Treadmill:

Apply slight forward pressure* on the treadmill running deck with one hand. Pull down on

the unlocking lever and slowly lower the running deck to the floor. The deck will lower

unassisted when it reaches about waist high.

*At the rear roller area to relieve pressure on the locking system.

•Z9

The treadmill is equipped with four transport wheels which are engaged when the treadmill

is folded. After folding simply roll the treadmill away.

Z9 Folding Instructions

Transport

Getting familiar with the control panel

•Z9 Console

WINDOW DISPLAY

PROFILE•8x20 dot matrix window, displaysprogram information and profiles.

TIME/LAPS: Accumulates total working time from 0:00 to 99:59 and total lap quantity.

(Please press “ENTER” for interchanging)

DISTANCE: Accumulates total working distance up to 999 miles from 0.00.

CALORIES: Accumulates the user’s calorie consumption during exercise from 0 to 999

calories.

PULSE: Displays your current heart rate in beats per minute during workout. When

handpulse doesn’t receive any value, window will display “P“.

INCLINE: Displays the incline position from 0 to 10. If user folds the running deck,

window will display “---“.

SPEED: Displays the current running speed from 1.0 MPH to 12MPH.

Operation of Your Treadmill

FUNCTION BUTTONS

SAFETY KEY:Placing the safety key in position will power on the computer. When safety

key is pulled away from its position, computer will be automatically shut

down.

START:Press “START” button to start training.

STOP: Press “STOP” button to stop training or press and hold “STOP” button for 2

seconds to reset all screen data.

FAST•Press “FAST”button to increase your speed. The maximum speed is 12

MPH.

SLOW•Press “SLOW’ button to decrease your speed. The minimum speed is

1.0Mph/1.0KMPH.

UP•Press “UP”button to raise incline position. The maximum incline position is

10. To fold the running deck, press Auto-Folding Switch and “up”button to

fold the treadmill.

DOWN•Press “DOWN” button to lower incline position. The minimum incline

position is 0. To unfold the running deck, press Auto-Folding Switch and

“down”button to unfold the treadmill.

PROGRAM•Press “PROGRAM”button to select different training mode.

P1 are MANUAL programs.

P2 ~ P6 are PRESET programs.

H1 ~ H2 are H.R.C. programs.

U1 ~ U3 are USER programs.

ENTER•Press “ENTER”button to set the program valuesin different training mode.

P1 (MANUAL) can set the program time.

P2 ~ P6 (PRESET PROGRAM) can set the program time and maximum

speed.

H1 ~ H2 (H.R.C.) can set program time, age and pulse target.

U1 ~ U3 (USER) can set program time, speed and incline.

SPEED RAPID KEY•5 preset buttons for rapid speed: 2, 4, 6, 8, 10 MPH / KMPH.

User can press the 5 buttons, mentioned above, at any time, to start treadmill and treadmill

will automatically increase to preset speed.

INCLINE RAPID KEY•5 preset button for rapid incline: 1, 3, 5, 7, 9 (POSITION).

During program, pressing these 5 buttons will achieve the preset incline position.

CONSOLE OPERATION

Inhaltsverzeichnis

Andere Spirit Tretmühle Handbücher

Spirit

Spirit CT900ENT Bedienungsanleitung

Spirit

Spirit CT850 ENT Bedienungsanleitung

Spirit

Spirit CT850 ENT Bedienungsanleitung

Spirit

Spirit XT385 Bedienungsanleitung

Spirit

Spirit F8500 Bedienungsanleitung

Spirit

Spirit Z88 Bedienungsanleitung

Spirit

Spirit XT685 Bedienungsanleitung

Spirit

Spirit XT800_A82-1 Bedienungsanleitung

Spirit

Spirit inspire IN839 Bedienungsanleitung

Spirit

Spirit XT685ENT Bedienungsanleitung

Spirit

Spirit XT685 Bedienungsanleitung

Spirit

Spirit XT375 Bedienungsanleitung

Spirit

Spirit XT385 Bedienungsanleitung

Spirit

Spirit 1613285 XT285 Bedienungsanleitung

Spirit

Spirit MT200 Bedienungsanleitung

Spirit

Spirit XT285 Bedienungsanleitung

Spirit

Spirit XT485 Bedienungsanleitung

Spirit

Spirit XT275 Bedienungsanleitung

Spirit

Spirit inspire IN300T Bedienungsanleitung

Spirit

Spirit XT 600 Bedienungsanleitung

Spirit

Spirit XT185 Bedienungsanleitung

Spirit

Spirit XT385 Bedienungsanleitung

Spirit

Spirit SL188 Bedienungsanleitung

Spirit

Spirit 1622778 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung

Precor

Precor PRECISION SERIES Technisches Handbuch