SPL Atmos Bedienungsanleitung

Manual

Atmos® Surround Miking System

Version 1.0 E – 12/2006

R&D: Wolfgang Neumann

This manual contains a description of the product. It in no way represents a guar-

antee of particular characteristics or results of use. The information in this document

has been carefully compiled and veried and, unless otherwise stated or agreed

upon, correctly describes the product at the time of packaging with this document.

Sound Performance Lab (SPL) continuously strives to improve its products and

reserves the right to modify the product described in this manual at any time without

prior notice. This document is the property of SPL and may not be copied or repro-

duced in any manner, in part or fully, without prior authorization by SPL.

The construction of the Atmos, Model 2600, is in compliance with the standards and

regulations of the European Cummunity

Contact

Sound Performance Lab

Sohlweg 80, 41372 Niederkruechten, Germany

Fon +49 (0) 21 63-9 83 40

Fax +49 (0) 21 63-98 34 20

Mail: info@spl.info

Internet: www.spl.info

Atmos Surround Miking System, Model 2600 Manual

Content

Atmos – the complete surround miking preamp ............................................. 4

Installation ................................................................................................... 5

Control Elements .......................................................................................... 6

Specications .............................................................................................. 7

Introduction

Dear customer,

thanks for using the Atmos system. We wish you have as much fun working with it as

we had during the development of this extraordinary recording equipment.

The complete Atmos system includes the Atmos preamp, the external power supply

and the power connection.

The Atmos system allows to record the original event and all of its authentic spatial

content with highest precision. It demonstrates the signicant difference between

discrete surround recordings and articial surround mixes with breathtaking

results.

Due to its analog structure, the audio signals are compatible with any common

surround format—DVD-A, DVD-V, SACD, AC3, DTS, MLP... you name it, Atmos can

deliver it.

Together with a main microphone array this unique system offers an unparalleled

combination of uncompromising audio quality and ultimate exibility.

Most importantly, the Atmos system is a breeze to use and can be set up in minutes,

arming you for the most convincing 5.1 recordings you‘ve ever experienced.

The Atmos is a fully-featured stand-alone surround miking preamp for surround

productions in any known format. The Atmos system operates fully analog to ensure

independence from any storage or transmission format.

Atmos controller

The Atmos is equipped with ve matched high precision microphone preamps

featuring SPL‘s triple gain stages to capture the superb sound of Brauner‘s mic array

microphone in the most transparent, noiseless and uncoloured way.

The microphone preamps also feature SPL‘s ServoDrive-Technology which detects

voltage differences (DC-offset) between the positive and negative paths of the ampli-

fying stages. Any offset increases noise and distortion and therefore compromises

the signal quality. ServoDrive minimizes DC-offsets to values between 0mV and 2mV.

The recorded signal contains less noise and distortion and improved tonal transpar-

ency.

Further features include Lundahl input transformers, pads, phase reverse, phantom

power, low cut lters, a switchable insert and tape send/returns. All switches are

luminated. High quality switches and relays with gold plated contacts are used

throughout.

5-layer gain control

An important feature of the Atmos is the high-precision ve-layer gain control. While

changing the preamplication the relative loudness relationships between all ve

microphones are maintained.

A Master Gain switch enables motorized control over all ve microphones preampli-

ers by just turning one control. This is especially important when re-adjustment of

the preamplication becomes necessary during recording to avoid negative effects

on the spatial coherence and phase stability.

Atmos – the complete surround miking preamp

The Atmos unit should not be installed near units which produce strong magnetic

elds or extreme heat. Do not install the units directly above or below power ampli-

ers.

A main mic array has to be placed the way that the LCR heads of the microphone

(those closer to the microphone center/90° angle) are facing the sound source.

Be sure to place the microphone as high as necessary to avoid ground reections

and comb ltering effects. Usually the best position for the mic array is right on the

crossing between the direct sound eld and the diffuse sound eld.

BEFORE switching on the preamp, you have to connect the mic array via the multicore

lead to the Atmos unit. Pay attention to t the bayonet joints properly. Check that the

voltage details quoted on the back panel correspond to your local mains electricity

supply. Use a minus (-) screwdriver to set the voltage selector to the required voltage.

By the way ... the Atmos uses two 1,6 A slow fuses.

Now switch on the Atmos preamp. Set the mic gain control to the 12 o’clock position.

Now the VU meters indicate modulation.

Chassis ground and AC ground can be disconnected with the Ground Lift switch (GND

LIFT) on the back panel. This can help to eliminate hum.

An AC power cord is included to feed the IEC-spec, 3-prong connector.

Inputs: The microphone inputs are equipped with phantom power supply.

Installation

5-Channel Preamplier Control

The central, 5-layer gain control allows for adjusting preamplication values

between 18 and 72 dB. It controls all channels simultaneously.

Switches: HP and PAD

The PAD switch reduces input level by -25 dBu. The HP switch activates a high pass

lter at 70 Hz, e.g. to eliminate subsonic frequencies.

Outputs

For recordings of the preamplied signals recording devices like a multitrack

recorder can be connected either to the XLR or DB 25 outputs.

LFE Level control

The LFE signal is composed from all channels automatically. Frequency is xed at

80 Hz, you can simply set the level with the LFE level control (-32 to 0 dB).

PPM Meters

The PPM meters display the levels at the output of each bus. Values range between

-48 dBu und +9 dBu and are displayed in steps of 3 dB.

A short example: How to use the Atmos

One can describe the work with the Atmos very good with the example of an

orchestral recording.

The main mic array is placed in a central position in front of the orchestra.

We choose a position of 1 to 2 meters behind and at least 4 meters above the

conductor.

As a starting point we recommend to adjust all mic heads in their 0° position (if the

mic capsules can be moved) and to select a hypercardioid polar pattern. Moving

the mic capsules allows for ne adjustments, for example smaller L/R angles result

in larger sound stages of small orchestras.

In general, the same rules apply as with standard miking techniques. So every user

can and should develop his own working practice for individual optimization.

Control Elements

Frequency range

Mic Out @ 18 dB Gain: 10 Hz-180 kHz (+/-3 dB, Phase –2°)

CMRR 100 Hz 1 kHz 10 kHz

18 dB Gain: -79 dB -79 dB -60 dB

34 dB Gain: -66 dB -66 dB -52 dB

60 dB Gain: -45 dB -45 dB -32 dB

w. Pad -16 dB @ 18 dB Gain: -90 dB -90 dB -79 dB

THD & N 1 kHz 10 kHz

60 dB Gain: 0,22 % 0,24 %

50 dB Gain: 0,07 % 0,07 %

40 dB Gain: 0,022 % 0,023 %

30 dB Gain: 0,007 % 0,007 %

18 dB Gain: 0,002 % 0,0023 %

S/N ratio (A-weighted)

150 Ohm generator, 22 Hz-22 kHz  lter, 60 dB Gain@150 Ohm

Mic Out: -66,8 dB

50 dB Gain@all: -77,2 dB

40 dB Gain@all: -85,8 dB

30 dB Gain@all: -93,6 dB

18 dB Gain@all: -96,4 dB

w. PAD -16 dB @ 18 dB Gain: -97,5 dB

Overload resistance +22 dB

Speci cations

Atmos Surround Miking System, Model 2600 Manual

Contact

Sound Performance Lab

Sohlweg 80, 41372 Niederkruechten, Germany

Fon +49 (0) 21 63-9 83 40

Fax +49 (0) 21 63-98 34 20

Mail: info@spl.info

Internet: www.spl.info

Inhaltsverzeichnis

Andere SPL Aufnahmegeräte Handbücher

SPL

SPL Frontliner 2800 Bedienungsanleitung

SPL

SPL MMC1 Bedienungsanleitung

SPL

SPL Transient Designer 2715 Bedienungsanleitung

SPL

SPL Madicon Bedienungsanleitung

SPL

SPL Phonitor 2 1530 Bedienungsanleitung

SPL

SPL 1211 Bedienungsanleitung

SPL

SPL DynaMaxx 9735 Bedienungsanleitung

SPL

SPL Vitalizer stereo MK2-T Bedienungsanleitung

SPL

SPL Marc One Bedienungsanleitung

SPL

SPL Stereo Vitalizer Jack 9530 Bedienungsanleitung

SPL

SPL Madison 1260 Bedienungsanleitung

SPL

SPL 2380 Bedienungsanleitung

SPL

SPL Phonitor 2730 Bedienungsanleitung

SPL

SPL Crimson 3 Bedienungsanleitung

SPL

SPL Transient Designer 4Mk2 Bedienungsanleitung

SPL

SPL Madicon Bedienungsanleitung

SPL

SPL DeEsser Mk2 Bedienungsanleitung

SPL

SPL Attacker2980 Bedienungsanleitung

SPL

SPL TwinTube 2920 Bedienungsanleitung

SPL

SPL 2Control 2860 Bedienungsanleitung

SPL

SPL Transient Designer 2880 Bedienungsanleitung

SPL

SPL MasterBay Series Bedienungsanleitung

SPL

SPL De-Esser 500 Series Bedienungsanleitung

SPL

SPL Crossover Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch