SWITCH PROGRAMMING
Create a master switch that will activate all
linked switches in the group when turned
on.
Use this slider to adjust background light
intensity and sleep timer adjustments (used
in conjunction with #5 below).
Select the switch you’d like to customize.
To lock switch activation, hold for 2 seconds.
Touch this to toggle between timer and
intensity.
Default source is 1. If you have multiple
sources, this is where you select which
source to control. You may also swipe left or
right to change between screens.
Used to disable swipe function.
Home screen view when locked. To unlock
the screen, hold for 5 seconds.
Used to pair to the sPOD App.
SWITCH FEATURES
This shows what switch you are currently
programming.
PLEASE BE SURE TO ABIDE BY YOUR STATE
LAWS WHEN USING FEATURES SUCH AS
STROBE AND FLASH.
1
1
2
3
4
5
6
7
8
9
1
2
3
4 5
6 7
8
6
9
1
SLEEP MODE
The Touchscreen will go into “Deep Sleep” after 6 hours of inactivity (ie:
no usage of the screen or not running the engine). Once in deep sleep,
the screen will turn o any accessories that were left on (including
refrigerators!).
If you are running the Touchscreen with a Bantam, this feature can be disabled by turning
on DIP switch #1. If you are running with a SourceSE, please contact us if you would like this
feature disabled: sales@4x4s-pod.com.
