SPORTS AFIELD PRESERVE Series Bedienungsanleitung

IMPORTANT:

Please read this information and follow all safety rules carefully before

operating your gun safe. Failure to do so will void your warranty.

PRESERVE SERIES INSTRUCTION MANUAL

020821

TABLE OF CONTENTS

THIS MANUAL SERVICES THE FOLLOWING STYLE NUMBERS

www.saproducts.com 1

SA5520P, SA5924P, SA5924PG, SA5932P, SA5932PG, SA5940P & SA7240P

IMPORTANT INFORMATION ............................................................................................... 2

1. REGISTRATION ................................................................................................................ 3

2. UNDERSTANDING YOUR SAFE ........................................................................................ 4

3. UNBOXING ...................................................................................................................... 4

4. INSPECTION .................................................................................................................... 4

5. OPENING YOUR SAFE ...................................................................................................... 5

6. PROPER PLACEMENT AND MOVING OF SAFE ................................................................ 6

7. KEEPING YOUR SAFE DRY ............................................................................................... 6

8. SHIPPING AND SKID REMOVAL ...................................................................................... 7

9. SECURING YOUR SAFE .................................................................................................... 8

10. E-LOCK INSTALLATION .................................................................................................. 9

11. SECURITY CODE SETUP FOR NON ILLUMINATED E-LOCKS ......................................... 10

12. ANTI-THEFT ALERT SYSTEM .........................................................................................11

13. LOW BATTERY WARNING ............................................................................................11

14. E-LOCK QUIET MODE ..................................................................................................12

15. LOCKED OUT OF YOUR SAFE .......................................................................................12

16. LOADING YOUR SAFE .................................................................................................. 12

17. MAINTAINING HINGES AND INTERNAL MECHANISMS ..............................................12

Customer Service - (888) 792-4264

DISCLAIMER - READ BEFORE SAFE SETUP

WEAPON STORAGE

SAFETY

Thank you for choosing a Sports Aﬁeld Safe to protect your valuables. We are

commied to securing, organizing and protecng your most important documents,

valuables and keepsakes.

Your safe is built to last a lifeme. However, please understand that the locking

mechanism has precision parts. If you experience ANY diﬃculty opening or closing

your safe. DO NOT FORCE THE SAFE OPEN. Doing so may jam the components in

the lock, which will require a safe technician to unlock your safe. This causes an

inconvenience to you and may lead to a claim denial.

If you experience problems or challenges with your safe, please contact us.

Many issues can be quickly resolved without the product being returned.

Safe bodies and doors are extremely heavy thus SA Consumer Products Requires a

minimum of two people to insure stability of the safe during installaon. Always ensure

proper installaon, as laid out in this manual, and do not open the door with the safe

on an uneven or unstable ﬂoor. Ignoring this could result in serious injury or death.

Keep a record of your combinaon number in a secureplace, away from children,

and separatefrom your safe. You will need this informaon along with your proof

of purchase to obtain technical assistance and replacement keys.

If you choose to ulize this safe to store a weapon always follow proper weapon

and local laws when storing a weapon.

SA Consumer Products strongly recommends that you do not store loaded guns.

Always follow the ﬁrearm safety rules set out by the ﬁrearm’s manufacturer.

A Sports Aﬁeld Safe or any other ﬁrearm storage device cannot take the place

of other safety procedures including advising children of the dangers of ﬁrearms.

SA Consumer Products and its distributors of the Sports Aﬁeld Safes do not

recommend, suggest, advise, promote, or otherwise condone the ownership

or use of ﬁrearms. We believe the decision to own or use a ﬁrearm is a serious

decision that should only be made by an adult who has carefully considered

the risks and beneﬁts of such a decision.

PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR

SPORTS AFIELD SAFE.

DO NOT LOCK THIS MANUAL OR THE OVERRIDE ACCESS KEYS IN YOUR SAFE.

www.sportsaﬁeldsafes.com

REGISTRATION INFORMATION

Customer Service - (888) 792-4264

PURCHASE DATE:

PURCHASE PRICE (BEFORE TAX):

MODEL NUMBER:

SERIAL NUMBER:

KEY NUMBER (IF APPLICABLE):

1. REGISTRATION

RETAILER PURCHASED AT:

Please ensureyou register your safeby vising our website. Locatethe

“contact” buon on thetop header on thehome page. Select registraon

from the drop down menu.

By registering your Sports Aﬁeld Safewe will be able to expedite and address

any problems or challenges you may have which would otherwiserequirea

notary leer and proof of payment.

Theinformaon you record onto this page will be required in the event you

cannot access thecontents of your Sports Aﬁeld Safe. Pleaseﬁll out all the

required informaon below and retain for your records and safe keeping.

PLEASE HAVE THIS INFORMATION READY PRIOR TOCALLING FOR TECHNICAL

ASSISTANCE AT:

2. UNDERSTANDING YOUR SAFE

4. INSPECTION

3. UNBOXING

Make sureto inspect your safefor shipping damagebefore accepng delivery.

If you ﬁnd any damage, please contact the delivery company (or carrier) immediately.

Any damage not noted upon delivery must be reported within ﬁeen (15) days

or there will be no recourse. Any noted damage at the me of delivery must be

resolved with the delivery company and/or retailer. Shipping damage is not

warrantable by SA Consumer Products.

WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN GROUND.

PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING UNSECURED

SAFES. WHILE UNBOXING BE SURE TO HAVE A SECOND PERSON HOLD AND

STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR

DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.

Remove thepackaging. If your safe is sll on shipping feet you can simply li

theboxup and oﬀthesafeoncethestrapping has been removed. If your safe

does not have shipping feet you will needto carefully remove thebox, ensuring

not to damage thesafeand/or injure yourself. You will want to have someone

stabilize the safe when removing the cardboard and other packing material

from underneath the safe.

External

Hinges

3 Spoke

Handle

(Except on

SA-5520P -

Drop Handle)

Fully Wrapped

Adjustable Shelf

UL Approved

Electrical Outlet

Bolt Down

Holes

Adjustable

Shelf Rails

Top Shelf

Deluxe

Door

Organizer

Override

Key Entry

(Underneath

keypad)

Programmable

E-Lock

9v Battery

Compartment

Reset

Button

AA Battery

Compartment

Active

Locking

Bolts

5. OPENING YOUR SAFE

2. Install the single handle spoke

handle by inserng into one

of the threaded openings

and twisng clockwise unl

you feel the spoke fully lock

into place.

Locatetheoverridekeys and

single handle spoke inside

theplasc bag hanging on

thefront of thesafe.

Locate the keyhole in the

backer plate. Insert and turn

the override key clockwise

from 9 to the 1 o’clock

posion to unlock.

CONTENTS:

USERS MANUAL, FAILSAFE

KEY AND HANDLE SPOKE

Step 4 Step 3 Step 2 Step 1

4. Turn thehandle clockwise

(counter-clockwise for

SA-5520P) unl the safedoor

opens. Once open, turn the

handle back to its starng

posion so the bolts are open

and extended. Remove key.

3. SA Consumer Products recommends that you store your safe in a closet, oﬃce,

basement, bedroom or any other locaon that is convenient for you but out of

direct line of sight from prying eyes. The locaon of the gun safe is very important.

Using a dolly capable of supporng thesize and weight of your safe, move thesafe

to your desired locaon. Pleasetakeall necessary precauons to protect and prevent

any damageto your ﬂooring.

HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH DOORWAYS,

STAIRS, OR CORNERS, TAKE THE EMPTY SAFE BOX AND SEE IF IT WILL FIT ALL THE WAY

THROUGH TO ITS FINAL LOCATION.

7. KEEPING YOUR SAFE DRY

We recommend placing a moisture/protecve barrier between your safe and

concrete ﬂoor to prevent any moisture, mildew and rust damage the safe. Installing

your safe in a place with climate control (heat in the winter and cooling in the summer)

is highly recommended. In areas of high humidity or frequent temperature ﬂuctuaons

(garages) it is recommend to take appropriate precauons to ward against moisture

damage. We strongly encourage the use of an internal dehumidiﬁer and/or desiccants

to protect your contents from rust or mildew. Internal dehumidiﬁers should not be

in direct contact with the side or back walls.

Thesafeshould be installed adjacent to a side wall with minimal space on either

sideof thesafe. Wherever possible, thesafeshould be ﬂat against thewall and

ﬂoor. Remove thebaseboard and/or wall trim if necessary.

Always ensurethesafeis in an isolated and dry area. Never place thesafein direct

contact with a wet ﬂoor. When installing your safeon a concrete ﬂoor,useof a

moisture/protecve barrier is highly recommended. Failure to do so, or exposing

the safe to chemicals or other adverse environments, may void the warranty.

If your safe seems unlevel, you may need to shim the boom of the safe to

prevent the door from swinging open too quickly, or closing on itself.

6. PROPER PLACEMENT AND MOVING OF SAFE

WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE THE

UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL WITH

PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.

The locaon of the gun safe is very important and the utmost care should be taken

during this consideraon.

To maximize the ﬁre protecon of your safe, we recommend you place the safe in

lower levels in your home where ﬁre temperatures are lower and away from highly

combusble materials.

To maximize burglary protecon and stability, securing the safe to the ﬂoor

is recommended.

8. SHIPPING AND SKID REMOVAL

WARNING: WHILE REMOVING THE BOLTS FROM THE SKIDS, BE SURE TO HAVE

A PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING

INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.

WARNING: BEFORE REMOVING THE SHIPPING SKIDS, MAKE SURE THE DOOR

IS CLOSED AND LOCKED. THE DOOR OF YOUR SAFE IS HEAVY AND PRESENTS

A SAFETY HAZARD UNTIL THE SAFE IS BOLTED DOWN OR SECURED PROPERLY.

Upon receiving your safe, you may ﬁnd it aached to a shipping skid. The skid

is secured from the underside of the safe by four bolts. Remove the four bolts

that secure the safe to the skids using a wrench or 11/16” (17mm) socket.

With a person stabilizing the safe, carefully lt the safe to the le and pull the

shipping skid on the right side away from the boom of the safe.

With the shipping skid removed from one side of the safe, carefully lower the

safe to the ﬂoor.

Follow the same procedure to remove the remaining shipping skid.

WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS OPENED.

HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING. WHILE SECURING YOUR

SAFE BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT

FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING

STRUCTURES. FAILURE TO DO SO WILL COMPROMISE THE SAFETY, SECURITY, AND

WARRANTY OF THE SAFE.

Use the hardware provided or consult your hardware retailer for fastening

hardware for your parcular mounng surface.

Open your safe door and locate and remove the four black caps on the

safe ﬂoor. This will provide access to the factory drilled bolt down holes.

To secure your safe to the ﬂoor it will ﬁrst be necessary to drill pilot holes

in the ﬂoor surface.

Drill the appropriate diameter and depth of pilot holes based on the type of

hardware being used and the type of ﬂoor surface. For the hardware provided

(concrete ﬂoor installaon) we recommend using a hammer drill and 1/2”

concrete drill bit to drill holes the four corresponding in the concrete ﬂoor.

Insert and drive the plasc anchoring plugs into the pilot holes. You may need

to use a hammer to fully insert the plugs into the pilot holes.

Secure the safe, by threading all 4 anchor bolts through the factory drilled bolt

down holes in the boom of the safe and ratcheng down ght.

7. Replace thefour black caps onto the ﬂoor of thesafe.

Make sure the metal washer sits on top of the rubber washer. Tighten the

bolt to compress the rubber washer between the safe and metal washer.

Failure to do so will allow water to enter the safe in the event of a ﬂood.

9. SECURING YOUR SAFE

TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE

• DRILL / HAMMER DRILL

• DRILL BIT – 1/2” ( for installing into concrete with provided hardware)

• WRENCH / 11/16” (17MM) SOCKET

• HAMMER

Plug E-lock cable into the

back of the E-lock. The cable

connector will only ﬁt one

way into the connector in

the lock face.

2. The e-lock requires 1x9V

alkaline baery. Locate the

baery compartment on

the back of the lock face.

Insert the baery in the

proper orientaon. Keypad

will beep when baeries

are successfully installed.

WARNING: The baeries must be

inserted with the correct polarity.

Exhausted baeries must be removed

from the product and discarded safely.

Do not mix old and new baeries. Do not

mix alkaline or standard (carbon – zinc)

baeries. Do not use rechargeable

(nickel – cadmium) baeries.

1. Remove lock face from box

located inside of safe.

10. E-LOCK INSTALLATION

1234

Align the lock face to the

backer plate, with the lock

face slightly rotated to the

le. Turn clockwise unl

the E-lock clicks into place.

Locate the two remaining

handle spokes inside of the

safe. Insert each individual

spoke into a threaded

opening and turn clockwise

to install.

Step 3 Step 2 Step 1

BACK OF LOCK FACE

FRONT OF LOCK FACE

9V BATTERY

Step 4

Andere Handbücher für PRESERVE Series

Inhaltsverzeichnis

Andere SPORTS AFIELD Sicher Handbücher

SPORTS AFIELD

SPORTS AFIELD DENALI Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD HAVEN Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA55-36V Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA5932P-BG Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-CV2-K Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD ELEVATION SA1639E-THD Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD PRESERVE BIOMETRIC Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD Gun Safe Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD YOSEMITE Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD2 Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD 18 Gun Safe Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD HAVEN Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA55-24V Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD6-MEL Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO-DP Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA30SM Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD2-BIO Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD6-BIO Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD FOR SA5524-BG Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD1-BIO Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD YOSEMITE SA55-12MYX, Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD6-BIO-DP Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD4 Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Phoenix

Phoenix FS1270E Series Bedienungsanleitung