SpreadNet SN960-PENDANT Bedienungsanleitung

SpreadNet

Model SN960-PENDANT

RF Personal Protection Transmitter

InstallationInstructions

The SpreadNet Model SN960-PENDANT Personal Transmitter is a truly

versatile wireless RF transmitter.

UsingSpreadSpectrumtechnology,theSN960-PENDANTprovideshigher

power,lowernoiselevels,lessinterference,andlongerrangethanobtain-

able with most single-frequency RF transmitters, resulting in increased

reliability.

The unit is equipped with two push buttons mounted on the sides of the

assembly. The transmitter is activated by pressing both buttons simulta-

neously.

UL COMPLIANCE

For Grade A household burglar alarm and household fire warning system

applicationsusing theC&K System2316 ControlPanel:

Onlyone transmitter may be installed perzone.

FEATURES

•SpreadSpectrumTechnology •Waterresistant

•SimpleInstallation •ProgrammableCheck-InRate

• EEPROMMemory •Includes Neck Chain and Belt

clip

•2push buttons wired

in series • LithiumBattery(Included)

•10mW TransmitterPower •Up to 3-year Battery Life

The SN960-PENDANT comes with an adjustable bead chain (P/N 7-700-

000-00) and a belt clip (P/N 5-532-111-00), both included. To install the

chain, open the chain and insert the end through the opening across the

top of the Pendant. (See Figure 1 below.) Remove excess chain length

bycuttingoffextrabeadswithapairofwirecutters.ThisallowsthePendant

to be worn around the neck.

ThePendant also comes supplied with anoptional belt clip, which may be

inserted into the back of the Pendant. (See Figure 1 below.)

PROGRAMMING THE PENDANT

To program the SN960-PENDANT, open the battery compartment and

remove the Battery Activator Tab from the positive (+) end of the battery.

Next,connecttheSN900-PROGHandheldRFProgrammertotheProgram-

mingConnectorandfollowtheprogramminginstructionsasoutlinedinthe

SN900-PROG Programming Manual (P/N 5-051-136-00).

TESTING THE PENDANT

To Walk-Test the SN960-PENDANT, move about in the various areas to

be protected, activating the Pendant in each area to ensure reception at

all positions to be covered. To activate the transmitter, press both Alarm

Activator Buttons on the sides of the Pendant at the same time.

NOTE:For continued reliability, the SN960-PENDANT should be

tested at least once per year.

SPECIFICATIONS

• Dimensions: • OperatingEnvironment:

2.75" L x 1.875" W x 0.875" D 32° to 140° F (0° to 60° C);

(7 cm x 4.75 cm x 2.2 cm) upto 95%relative humidity

(non-condensing)

•Weight:

2 oz. (57 g) • RFEmissionStandards:

USA: FCC Part 15

• OperatingFrequency: CANADA: IndustryCanada

902 - 928 MHz Spread Spectrum • Supervisory Rate:

• Input Power: 30 - 300 sec (30 sec intervals)

one6 VDC 1/2AA lithium battery 0 isunsupervised

• Output Power: • NeckChain

10mW P/N7-700-000-00

transmittingperiod -7.6 mSec • Belt Clip

• Replace Batteries Only with P/N5-532-111-00

C&KModel #SN60L-BAT

Duracell XL PX 28L

NOTE: Batteries should be replaced

following a low battery indication or

every 3 years, whichever occurs first.

AlarmActivator

Buttons

Programming

Connector

Battery

Compartment

Battery BeltClip

Neck Chain

RetainerSleeve

Neck

Chain

Battery

Compartment

Battery Compartment

Retaining Screws

Figure 1 - Transmitter Housing

C&K is a registered trademark of C&K Components, Inc. Printed in Hong Kong P/N 5-051-270-00 Rev B

SpreadNet is a registered trademark of C&K Systems, Inc.

FCC NOTICE

TheModelSN960-PENDANTPersonalProtectionTransmittergeneratesand

usesradiofrequencyenergy. Ifnotinstalledandusedinaccordancewiththe

manufacturer'sinstructions,itmaycauseinterferencetoradioandtelevision

reception. ThePendantTransmitterhasbeentestedandfound tocomplywith

thespecificationsinPart15ofFCCRulesforClassBComputingDevicesand

FCC Part 15 Subpart C, Specifications for Intentional Spread Spectrum

Radiators.

Ifthis equipment causes interference toradio or television reception - which

can be determined by turning the equipment on and off - the installer is

encouraged to correct the interference by one or more of the following

measures: 1) Reorienttheantennaoftheradio/television. 2) ConnecttheAC

transformertoadifferentoutletsothecontrolpanelandradio/televisionareon

differentbranchcircuits. 3) Relocatethecontrolpanelwithrespecttotheradio/

television.

If necessary, the installer should consult an experienced radio/television

technicianforadditionalsuggestions,orsendforthe"InterferenceHandbook"

prepared by the Federal Communications Commission. This booklet is

availablefromtheU.S.GovernmentPrintingOffice,WashingtonD.C.,20402,

stocknumber004-000-00450-7.

CAUTION: C&Kdoesnotsupportfieldchangesormodificationstoanyofthe

SpreadNetRFequipmentunlesstheyarespecificallycoveredinthismanual.

Alladjustmentsmustbemadeatthefactoryunderthespecificguidelinesset

forthinourmanufacturingprocesses. Anymodificationtotheequipmentcould

voidtheuser'sauthorityto operatetheequipmentandrender theequipment

in violation of FCC Part 15, Subpart C, 15.247.

This device complies with Part 15 of the FCC Rules. Operation is subject to

thefollowing two conditions: (1) thisdevice maynot cause harmfulinterfer-

ence, and (2) this device must accept any interference received, including

interferencethatmaycauseundesiredoperation.

IndustryCanada

This digital apparatus does not exceed the Class B limits for radio noise

emmissions from digital apparatus as set out in the Radio Interference

RegulationsoftheCanadianDepartmentofCommunications.

Leprésentappareilnumérquen'émetpasdebruitsradioélectriquesdépassant

leslimitesapplicablesauxappareilsnumériquedeClasseBprescritesdans

le règlement sur le brouillage Radioélectrique édicté par le Ministère des

CommunicationsduCanada.

LIMITEDWARRANTY

Seller warrants its products to be in accordance with its own plans and specifications and to

be free from defects in materials and workmanship under normal use and service for 18

months fromthedatestampcontrolontheproduct; or for products not having a C&K Systems

date stamp, for 12 months from the date of original purchase, unless the installation

instructions or catalogue sets forth a shorter period, in which case the shorter period shall

apply.

Seller's obligation shall be limited to repairing or replacing, at its option, free of charge for

materials or labor, any part which is proved not in compliance with Seller's specifications or

proves defective in materials or workmanship under normal use and service. This warranty

is void if the product is altered or improperly repaired or serviced by anyone other than an

authorized C&K factory service center. Contact your local C&K distributor for the service

center location nearest you.

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR

FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND

THE DESCRIPTION ON THE FACE HEREOF. In no case shall Seller be liable to anyone for

any consequential or incidental damages for breach of this or any other warranty, express or

implied, or upon any other basis of liability whatsoever, even if the loss or damage is caused

by Seller's own negligence or fault.

Seller does not represent that its product may not be compromised or circumvented; that the

productwillpreventanypersonalinjury orpropertylossbyburglary,robbery,fire,or otherwise;

orthattheproductwillinallcasesprovideadequatewarningor protection. Buyer understands

that a properly installed and maintained alarm system may only reduce the risk of burglary,

robbery, or fire without warning, but it is not insurance or guarantee that such will not occur or

that there will be no personal injury or property loss as a result. CONSEQUENTLY, SELLER

SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, OR

OTHER LOSS BASED ON A CLAIM THAT THE PRODUCT FAILED TO GIVE WARNING.

However, if Seller be held liable, whether directly or indirectly, for any loss or damage arising

under this Limited Warranty or otherwise, regardless of cause or origin, Seller's maximum

liability shall not in any case exceed the purchase price of the product, which shall be fixed

as liquidated damages and not as a penalty, and shall be the complete and exclusive remedy

against Seller.

This warranty replaces all previous warranties and is the only warranty made by C&K on this

product. No increase or alteration, written or verbal, of the obligation of this warranty is

authorized.

Inhaltsverzeichnis

Andere SpreadNet Sender Handbücher

SpreadNet

SpreadNet SN935-DT Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung