ST SPC58NHADPT176S Bedienungsanleitung

Introduction

The SPC58NHADPT176S Rev.A evaluation board supports STMicroelectronics SPC58NH92 microcontroller in LQFP

24X24X1.4 176L.

Figure 1. SPC58NHADPT176S Rev.A

Note: picture not contractual

SPC58NHADPT176S Rev.A evaluation board

UM2731

User manual

UM2731 - Rev 1 - September 2020

For further information contact your local STMicroelectronics sales office.

www.st.com

1Overview

The SPC58NHADPT176S Rev. A mini module is an evaluation board supporting STMicroelectronics SPC58NH92

microcontroller in LQFP 24X24X1.4 176L package (LQFP 24X24X1.4 176L P0.5 EXPOSED PAD).

This mini module is designed to be connected onto the SPC58XXMB/SPC57XXMB motherboard, offering a

mechanism for easy customer evaluation of the supported devices, and to facilitate hardware and software

development.

The mini module may be used as a stand-alone unit allowing access to the CPU, but not to access to the I/O pins

nor any motherboard peripherals.

1.1 Package contents

A SPC58NHADPT176S Rev. A adapter package includes the following items:

• SPC58NHADPT176S Rev. A mini module

1.2 Supported devices

The SPC58NHADPT176S Rev. A mini module supports the SPC58NH family in LQFP 24X24X1.4 176L package.

UM2731

Overview

UM2731 - Rev 1 page 2/37

2License agreement

The packaging of this evaluation board was sealed with a seal stating, “by breaking this seal, you agree to the

terms and conditions of the evaluation board license agreement, the terms and conditions of which are available

at http://www.st.com/ebla”. Upon breaking the seal, you and STMicroelectronics entered into the evaluation board

license agreement, a copy of which is also enclosed with the evaluation board for convenience.

Attention: This evaluation board only offers limited features for evaluating ST products. It has not been tested for use with

other products and is not suitable for any safety or other commercial or consumer application. This evaluation

board is otherwise provided “AS IS” and STMicroelectronics disclaims all warranties, express or implied,

including the implied warranties of merchantability and fitness for a particular purpose.

UM2731

License agreement

UM2731 - Rev 1 page 3/37

3Handling precautions

Please take care to handle the package contents in a manner such as to prevent electrostatic discharge.

Before the EVB is used or power is applied, please fully read the following sections on how to correctly configure

the board. Failure to correctly configure the board may cause irreparable component, MCU or EVB damage.

UM2731

Handling precautions

UM2731 - Rev 1 page 4/37

4Hardware description

4.1 Hardware features

The SPC58NHADPT176S Rev. A mini module board has the following features:

• Connector for external power supplies input (5V) used in stand-alone mode

• Reset button with driver and led indicator

• Socket for device in LQFP 24X24X1.4 176L package

• Debug interfaces:

– 14-pin header connector for JTAG interface

– 10-pin header connector for JTAG/LFAST LVDS interface

– 10-pin header connector for SIPI interface

• 40 MHz crystal main oscillator with jumpers to optionally disconnect it

• 8 MHz oscillator with jumpers to optionally disconnect it

• Clock input through SMA connector with jumper to optionally disconnect it

• 2 X SAMTEC QSH series, 240-way connector to connect mini module to Motherboard

• 1 Gb/s Ethernet port

• HyperRAM and HyperFlash connected to HyperBUS interface

• Embedded eMMC device

• SD/MMC Card Reader

• 12x2 I/O connector

UM2731

Hardware description

UM2731 - Rev 1 page 5/37

4.2 Hardware dimension

The mini module has the following dimensions:

• PCB area: 127 mm x 114.3 mm

• Top components height: 19 mm max

• Bottom components height: 3.5 mm max

• PCB thickness: 1.6 mm

Figure 2. SPC58NHADPT176S Rev. A top component view

UM2731

Hardware dimension

UM2731 - Rev 1 page 6/37

5Power and system configuration

5.1 Power supplies

The mini module can be powered by providing voltages either supplied externally by the 2-Way PCB screw

connector (CN1) or supplied by the motherboard.

When the mini module is connected to the motherboard (MB), 3V3 and 5V0 are supplied by MB connector

selecting the associated jumpers. In this setup the external power supply input available on the mini module

MUST NOT BE USED.

When the SPC58NHADPT176S Rev. A mini module is used as a stand-alone board, 5V0 voltages must be

supplied externally, 3V3 and 1V2 voltages will be generated internally by specific circuit on the mini module.

The following jumpers are used to configure the power supply (common for all supported devices):

Table 1. Power configuration jumpers

Jumper Description Default Position

5.0V source for J3 pin1 (MB_5.0V_LR or 5.0

V_ADC) voltage configuration:

• 1-2 MB_5.0V_LR

• 2-3 5.0 V_ADC

2-3

(5.0V_ADC)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - C3

5.0V switching voltage configuration:

• 1-2 5 V EXT (external 5.0V supply)

• 2-3 MB_5.0V_SR (5.0V from

Motherboard)

2-3

(MB_5.0V_SR)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - D4

VDD_HV_ADR_S / VDD_HV_ADV voltage

configuration:

• 1-2 5.0V source from J1 pin2

• 2-3 3.3 V_ADC source from J4 pin2

1-2

(5.0V_ADV)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - C3

3V3 source (3.3V or MB_3.3V_SR) voltage

configuration:

• 1-2 3.3V (3.3V from mini module)

• 2-3 MB_3.3V_SR

1-2

(3.3V)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - D3

Main MCU supply (VDD_HV_IO_MAIN) voltage

configuration:

• 1-2 5.0V_SR

• 2-3 3.3 V_SR from J4 pin2

1-2

(5.0V_SR)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - D3

Supply for BALLAST circuit configuration

• 1-2 VDD_HV_IO_MAIN

• 2-3 5.0V_SR

1-2

(VDD_HV_IO_MAIN)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - D3

BALLAST CIRCUIT ENABLE

• Closed: enable

• Open: disable

Closed

(enable)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - D2

VDD_LV voltage configuration:

• 1-2 (1.2V_SR from J9 pin2)

• 2-3 (BALLAST circuit)

1-2

(1.2V_SR)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - C3

1.2V_SR switching configuration:

• 1-2 MB_1.25V_SR (1.25V from MB)

• 2-3 1.2V (1.2V from mini module)

2-3

(1.2V from mini module)

Figure 8. Overview of

SPC58NHADPT176S Rev. A mini

module - Top - D3

UM2731

Power and system configuration

UM2731 - Rev 1 page 7/37

5.2 JTAG/LFAST LVDS interface configuration

The following jumpers need to configure the JTAG/LFAST LVDS/SIPI:

Table 2. JTAG/LFAST/SIPI Configuration jumpers

Jumper Description Default Position

J10

SIPI pin 3 configuration

• 1-2: RDY

• 2-3: PA14

1-2

(RDY) Figure 8. Overview of SPC58NHADPT176S Rev. A mini module - Top - A4

J11

TDI_LF configuration

• 1-2: TDI_LF

• 2-3: PA8

1-2

(TDI_LF) Figure 8. Overview of SPC58NHADPT176S Rev. A mini module - Top - A4

J12

TDO_LF configuration

• 1-2: TDO_LF

• 2-3: PA9

1-2

(TDO_LF) Figure 8. Overview of SPC58NHADPT176S Rev. A mini module - Top - A4

J13

JTAG pin 13 configuration

• 1-2: EVTO

• 2-3: PJ3/PQ4

1-2

(EVTO) Figure 8. Overview of SPC58NHADPT176S Rev. A mini module - Top - B4

J14

PC1 / ESR0

• 1-2 ESR0

• 2-3 PC1

1-2

(ESR0) Figure 8. Overview of SPC58NHADPT176S Rev. A mini module - Top - B4

J15

EVTO/ESR0

• 1-2 ESR0

• 2-3 EVTO

1-2

(ESR0) Figure 8. Overview of SPC58NHADPT176S Rev. A mini module - Top - B4

UM2731

JTAG/LFAST LVDS interface configuration

UM2731 - Rev 1 page 8/37

5.3 System clock configuration

The mini module supports the usage of crystal clock sources as well as external clock source:

Table 3. Clock configuration jumpers

Jumper Description Default Position

J20

XTAL32 configuration

• Close: connect pin 2 of 32.768 KHz crystal

(Y2) to XTAL32

Open Figure 8. Overview of SPC58NHADPT176S

Rev. A mini module - Top - C3

J21

EXTAL32 configuration

• Close: connect pin 1 of 32.768 KHz crystal

(Y2) to EXTAL32

Open Figure 8. Overview of SPC58NHADPT176S

Rev. A mini module - Top - C3

J17

EXTAL configuration

• 1-2 connect pin 2 of 40 MHz crystal (Y1) to

EXTAL

• 2-3 connect EVB-EXTAL to EXTAL

1-2

(Y1 pin2 to

EXTAL)

Figure 8. Overview of SPC58NHADPT176S

Rev. A mini module - Top - C2

J19

XTAL configuration

• 1-2 connect pin 1 of 40 MHz crystal (Y1) to

XTAL

• 2-3 connect XTAL to GND

1-2

(Y1 pin1 to

XTAL)

Figure 8. Overview of SPC58NHADPT176S

Rev. A mini module - Top - C2

J18

Enable 8 MHz oscillator power supply

• open - power off

• closed - power on

Open

(power off)

Figure 8. Overview of SPC58NHADPT176S

Rev. A mini module - Top - C1

J22

External 8 MHz clock source

• 1-2 OSC-MOD (from oscillator)

• 2-3 EXTAL-SMA (from SMA connector)

1-2

(8 MHz from

oscillator)

Figure 8. Overview of SPC58NHADPT176S

Rev. A mini module - Top - C2

5.4 Reset circuit

The mini module supports different ways to reset the microcontroller. To use and perform the reset driving there

are different jumpers and switches:

Table 4. Reset configuration jumpers

Jumper Description Default Position

SW1 Reset push button Open Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - A4

J24

Connect the external

reset to the reset driver

for ESR0 and PORST

pins

Close Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - C4

J23 Connect the external

reset to ESR0 pin Close Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - C4

J25 Connect the external

reset to PORST pin Close Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - C4

UM2731

System clock configuration

UM2731 - Rev 1 page 9/37

5.5 Other Jumpers

Table 5. Other jumpers

Jumper Description Default Position

J16 TESTMODE settings Close

(10 KΩ down)

Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - B2

5.6 Configuration for pin shared between HyperBus & eMMC

The jumpers described into the following table allow you to configure the pins shared between HyperBus and

eMMC.

Table 6. Pin shared between HyperBus & eMMC jumper

Jumper Description Default configuration Position

J27

Data4 - PF9 configuration

• 1-2 DQ4_HB

(HyperBus)

• 2-3 D4_eMM

(eMMC)

1-2

(HyperBus)

Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - B2

J29

Data5 – PF10

configuration

• 1-2 DQ5_HB

(HyperBus)

• 2-3 D5_eMM

(eMMC)

1-2

(HyperBus)

Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - B2

J31

Data6 - PF11

configuration

• 1-2 DQ6_HB

(HyperBus)

• 2-3 D6_eMM

(eMMC)

1-2

(HyperBus)

Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - B2

J34

Data7 - PF12

configuration

• 1-2 DQ7_HB

(HyperBus)

• 2-3 D7_eMM

(eMMC)

1-2

(HyperBus)

Figure 8. Overview of SPC58NHADPT176S Rev. A

mini module - Top - B2

UM2731

Other Jumpers

UM2731 - Rev 1 page 10/37

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST STEVAL-IHM022V1 Bedienungsanleitung

ST STEVAL-IHP007V1 Bedienungsanleitung

ST PowerSTEP01 EVLPOWERSTEP01 Bedienungsanleitung

ST STM8L15LPBOARD Bedienungsanleitung

ST EVB-LIV4F Bedienungsanleitung

ST STEVAL-IHM022V1 Bedienungsanleitung

ST STM3240G-EVAL Bedienungsanleitung

ST UM1461 Bedienungsanleitung

ST STM3210E-EVAL Bedienungsanleitung

ST B-L4S5I-IOT01A Bedienungsanleitung

ST UM2313 Bedienungsanleitung

ST STM32H743I-EVAL Bedienungsanleitung

ST STEVAL-PCC001V1 Bedienungsanleitung

ST AEK-POW-LDOV01J Bedienungsanleitung

ST STM32MP157F-EV1 Bedienungsanleitung

ST STUSB02E Bedienungsanleitung

ST AEKD-USBTYPEC1 Bedienungsanleitung

ST NUCLEO-WL55JC STM32WL Bedienungsanleitung

ST X-NUCLEO-S2868A1 Bedienungsanleitung

ST STM3220G-EVAL Bedienungsanleitung

ST STA333ML Montage- und Bedienungsanleitung

ST EVAL-L99H02QF Bedienungsanleitung

ST ST7LIT15BY0 Bedienungsanleitung

ST EVAL-RHRICL1ATV1 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung