ST B-L4S5I-IOT01A Bedienungsanleitung

Introduction

The B-L4S5I-IOT01A Discovery kit for the IoT node allows the user to develop applications with a direct connection to the cloud

servers.

The B-L4S5I-IOT01A Discovery kit for the IoT node enables a wide diversity of applications by exploiting low-power multilink

communication (Bluetooth® Low Energy, Wi‑Fi®, NFC), multiway sensing (detection, environmental awareness) and

Arm® Cortex®-M4 core-based STM32L4+ Series features.

ARDUINO® Uno V3 and Pmod™ connectivity provide unlimited expansion capabilities with a large choice of specialized add-on

boards.

The B-L4S5I-IOT01A Discovery kit for the IoT node includes an ST-LINK debugger/programmer and comes with the

comprehensive STM32CubeL4 MCU Package, which provides an STM32 comprehensive software HAL library as well as

various software examples to seamlessly connect to cloud servers.

Figure 1. B-L4S5I-IOT01A Discovery kit for the IoT node

Picture is not contractual.

Discovery kit for IoT node, multi-channel communication with STM32L4+ Series

UM2708

User manual

UM2708 - Rev 1 - April 2020

For further information contact your local STMicroelectronics sales office. www.st.com

1Features

• Ultra-low-power STM32L4+ Series STM32L4S5VIT6 microcontroller based on the Arm® Cortex®-M4 core

with 2 Mbytes of Flash memory and 640 Kbytes of RAM in LQFP100 package

• 64-Mbit Quad-SPI Flash memory from Macronix™

• Bluetooth® 4.1 module (SPBTLE-RF) from STMicroelectronics

• 802.11 b/g/n compliant Wi‑Fi® module (ISM43362-M3G-L44) from Inventek Systems

• Dynamic NFC tag based on ST25DV04K with its printed NFC antenna

• 2 digital omnidirectional microphones (MP34DT01) from STMicroelectronics

• Capacitive digital sensor for relative humidity and temperature (HTS221) from STMicroelectronics

• High-performance 3-axis magnetometer (LIS3MDL) from STMicroelectronics

• 3D accelerometer and 3D gyroscope (LSM6DSL) from STMicroelectronics

• 260-1260 hPa absolute digital output barometer (LPS22HB) from STMicroelectronics

• Time-of-flight and gesture-detection sensor (VL53L0X) from STMicroelectronics

• Highly-secure solution (STSAFE-A110) from STMicroelectronics

• 2 push-buttons (user and reset)

• USB OTG FS with Micro-AB connector

•ARDUINO® Uno V3 expansion connector

• Pmod™ expansion connector

• Flexible power-supply options: ST-LINK, USB VBUS or external sources

• On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual

COM port, and debug port

• Comprehensive free software libraries and examples available with the STM32Cube MCU Package

• Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, and

STM32CubeIDE

Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.

UM2708

Features

UM2708 - Rev 1 page 2/43

2Ordering information

To order the B-L4S5I-IOT01A Discovery kit for the IoT node, refer to Table 1. Additional information is available

from the datasheet and reference manual of the target STM32.

Table 1. Ordering information

Order code Board reference Target STM32

B-L4S5I-IOT01A MB1297 STM32L4S5VIT6U

2.1 Product marking

Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference

design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will

be liable for any customer usage of these engineering sample tools as reference designs or in production.

“E” or “ES” marking examples of location:

• On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the

STM32 datasheet “Package information” paragraph at the www.st.com website).

• Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board.

This board features a specific STM32 device version, which allows the operation of any bundled commercial

stack/library available. This STM32 device shows a "U" marking option at the end of the standard part number

and is not available for sales.

In order to use the same commercial stack in his application, a developer may need to purchase a part number

specific to this stack/library. The price of those part numbers includes the stack/library royalties.

2.2 Codification

The meaning of the codification is explained in Table 2.

Table 2. Codification explanation

B-L4S5I-IOT01A Description B-L4S5I-IOT01A

B Discovery kit with a variety of sensors Sensor node

L4S5 MCU product line in STM32 32-bit Arm Cortex MCUs STM32L4R5/S5 in the STM32L4+ Series

ISTM32 Flash memory size:

• I for 2 Mbytes 2 Mbytes

IOT Dedicated to IoT applications Discovery kit for IoT applications

The order code is mentioned on a sticker placed on the top or bottom side of the board.

UM2708

Ordering information

UM2708 - Rev 1 page 3/43

3Development environment

The B-L4S5I-IOT01A Discovery kit for the IoT node runs with the STM32L4S5VI 32-bit microcontroller based on

the Arm® Cortex®-M4 core.

3.1 System requirements

• Windows® OS (7, 8 and 10), Linux® 64-bit, or macOS®

• USB Type-A to Micro-B cable

Note: macOS® is a trademark of Apple Inc. registered in the U.S. and other countries.

All other trademarks are the property of their respective owners.

3.2 Development toolchains

• IAR™ - EWARM (see note)

• Keil® - MDK-ARM (see note)

• STMicroelectronics - STM32CubeIDE

Note: On Windows® only.

3.3 Demonstration software

The demonstration software, included in the STM32Cube MCU Package corresponding to the on-board

microcontroller, is preloaded in the STM32 Flash memory for easy demonstration of the device peripherals in

standalone mode. The latest versions of the demonstration source code and associated documentation can be

downloaded from www.st.com.

UM2708

Development environment

UM2708 - Rev 1 page 4/43

4Conventions

Table 3 provides the conventions used for the ON and OFF settings in the present document.

Table 3. ON/OFF convention

Convention Definition

Jumper JPx ON Jumper fitted

Jumper JPx OFF Jumper not fitted

Jumper JPx [1-2] Jumper fitted between Pin 1 and Pin 2

Solder bridge SBx ON SBx connections closed by 0 Ω resistor

Solder bridge SBx OFF SBx connections left open

Resistor Rx ON Resistor soldered

Resistor Rx OFF Resistor not soldered

UM2708

Conventions

UM2708 - Rev 1 page 5/43

5Delivery recommendations

Before the first use, make sure that no damage occurred to the board during shipment and no socketed

components are not firmly fixed in their sockets or loose in the plastic bag.

UM2708

Delivery recommendations

UM2708 - Rev 1 page 6/43

6Hardware layout and configuration

The B-L4S5I-IOT01A Discovery kit for the IoT node is designed around the STM32L4S5VIT6U target

microcontroller in a 100-pin LQFP package. The hardware block diagram (Refer to Figure 2) illustrates the

connection between the STM32 and peripherals: embedded ST-LINK, ARDUINO® Uno V3 shields, Pmod™

connector, Quad-SPI Flash memory, USB OTG connectors, digital microphones, various ST-MEMS sensors, and

the three RF modules (Wi‑Fi®, Bluetooth®, and NFC). Figure 3 and Figure 4 help users to locate these features

on the B-L4S5I-IOT01A Discovery kit for the IoT node. Figure 5 gives the mechanical dimensions of the B-L4S5I-

IOT01A Discovery kit for the IoT node.

Figure 2. Hardware block diagram

STM32L4S5VIT6

MP34DT01

Digital microphone

RTC

SWD

3.3 V Power

supply

32 KHz Crystal

ST-LINK /

V2-1

GPIOs and

UART3

DFSDM

ISM43362-M3G-L44

Wi-Fi® module

PmodTM (2A) connector

PmodTM (4A) connector

LEDs,

reset and wake-up

buttons

GPIOs

GPIOs and

SPI2

GPIOs and

UART2

HS PHY and

Micro-AB USB

connector

OTG FS

QSPI

64-Mbit Quad-SPI Flash

(MX25R6435F)

VCP UART1

ARDUINO® UNo

Shield connectors

GPIOs,

UART4, and

SPI1

Micro-B

USB

connector

GPIOs and

SPI3

SPBTLE-RF

Bluetooth® module

SPSGRF Sub-GHz

(Spirit) module

not fitted

ST25DV04K NFC

module

GPIOs and

I2C2

LIS3MDL

3-axis magnetometer

LSM6DSL

3D gyroscope

LPS22HB

Digital barometer

HTS221

Humidity and

temperature

VL53L0X

ToF and gesture

detection

STSAFE-A110

Authentication and

security

MP34DT01

Digital microphone

UM2708

Hardware layout and configuration

UM2708 - Rev 1 page 7/43

Figure 3. B-L4S5I-IOT01A Discovery kit for the IoT node layout (top view)

UM2708 - Rev 1 page 8/43

UM2708

Figure 4. B-L4S5I-IOT01A Discovery kit for the IoT node layout (bottom view)

UM2708 - Rev 1 page 9/43

UM2708

Figure 5. B-L4S5I-IOT01A Discovery kit for the IoT node mechanical drawing in millimeters

UM2708 - Rev 1 page 10/43

UM2708

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST ST25RU3993 Bedienungsanleitung

ST STEVAL-WBC86TX Bedienungsanleitung

ST ST25DV-I2C Bedienungsanleitung

ST STM8L1526-EVAL Bedienungsanleitung

ST EVALKITSTKNX Bedienungsanleitung

ST STEVAL-ISB041V1 Bedienungsanleitung

ST STEVAL-ISB68RX Bedienungsanleitung

ST X-NUCLEO-IDB05A1 Bedienungsanleitung

ST STLINK-V3SET Bedienungsanleitung

ST STM8T141-EVAL Bedienungsanleitung

ST STEVAL-ISB044V1 Bedienungsanleitung

ST STEVAL-WESU1 Bedienungsanleitung

ST STLINK-V3SET Bedienungsanleitung

ST EVAL-7803APSO-SA Bedienungsanleitung

ST STEVAL-IPMM10B Bedienungsanleitung

ST EVAL-L99MOD5xXP Bedienungsanleitung

ST EVAL-L99ASC03 Bedienungsanleitung

ST UM2248 Bedienungsanleitung

ST STM32756G-EVAL Bedienungsanleitung

ST STM3220G-EVAL Bedienungsanleitung

ST UM0969 Bedienungsanleitung

ST VM6101 Bedienungsanleitung

ST STEVAL-ICB008V1 Bedienungsanleitung

ST UM1461 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung