ST X-NUCLEO-IDW01M1 Bedienungsanleitung

June 2016

DocID028561 Rev 3

1/8

For further information contact your local STMicroelectronics sales

office

www.st.com

X-NUCLEO-IDW01M1

Wi-Fi expansion board based on SPWF01SA module for STM32

Nucleo

Data brief

Features

X-NUCLEO-IDW01M1 hosts FCC, IC and

CE certified SPWF01SA module (FCC ID:

VRA-SG9011203, IC: 7420A-SG9011203

and ETSI compliant)

SPWF01SA module major characteristics:

low power IEEE 802.11 b/g/n

transceiver

integrated SMD antenna

STM32 ARM Cortex-M3, with 64 KB

RAM and 512KB FLASH memory

1 MByte extended flash for FW update

over the air (FOTA)

integrated protocol stacks: TCP/IP,

TLS/SSL

application layer functions: web server

supporting dynamic web pages, REST

API to get & post web content

WEP/WPA/WPA2 personal security

system modes: station, IBSS, and

miniAP

16 configurable GPIOs available

simple AT command set host interface

through UART

compatible with STM32 Nucleo boards

equipped both with ST morpho connector

and Arduino UNO R3 connectors

scalable solution; it can cascade multiple

boards for larger systems

free development firmware library and

examples, compatible with STM32Cube

RoHS compliant

Description

The X-NUCLEO-IDW01M1 is a Wi-Fi evaluation

board based on the SPWF01SA module, which

expands the STM32 Nucleo boards. The CE, IC

and FCC certified SPWF01SA module has an

embedded STM32 MCU, a low-power Wi-Fi b/g/n

SoC with integrated power amplifier and power

management and an SMD antenna. The

SPWF01SA module is also equipped with 1

MByte of external FLASH for firmware update

over-the-air (FOTA). The firmware features a

complete software IP stack to open up to 8

TCP/UDP sockets, as well as dynamic web

pages with SSI to interact with the module and a

REST API (get & post) for conveniently

transferring files to/from servers in the cloud. The

module can simultaneously behave as a socket

server and socket client. The firmware supports

secure sockets with TLS/SSL encryption,

ensuring secure end-to-end communications with

the cloud, with or without authentication. The

module operates as a client STA, IBSS, or

miniAP (with up to 5 client STAs). The X-

NUCLEO-IDW01M1 interfaces with the MCU on

the STM32 Nucleo board via the UART serial

port; the user can easily access the stack

functions using the AT command. X-NUCLEO-

IDW01M1 is compatible with both the ST morpho

and Arduino UNO R3 connector layout.

Radio certification

X-NUCLEO-IDW01M1

2/8

DocID028561 Rev 3

1 Radio certification

1.1 Formal notices required by the U.S. Federal

Communications Commission (FCC)

Any changes or modifications to this equipment not expressly approved by

STMicroelectronics may cause harmful interference and void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including any interference that may cause undesired

operation.

This device uses, generates and radiates radio frequency energy. The radio frequency

energy produced by this device is well below the maximum exposure limit established by

the Federal Communications Commission (FCC).

The X-NUCLEO-IDW01M1 contains the FCC certified SPWF01SA module (FCC ID: VRA-

SG9011203).

1.2 Formal notices required by Industry Canada (IC)

English:

This device complies with Industry Canada license-exempt RSS standard(s). Operation is

subject to the following two conditions: (1) this device may not cause interference, and (2)

this device must accept any interference, including interference that may cause undesired

operation of the device.

French:

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence. 'Exploitation est autorisée aux deux conditions suivantes : (1)

l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement.

The X-NUCLEO-IDW01M1 contains the IC certified SPWF01SA module (IC: 7420A-

SG9011203)

1.3 Formal notices required by the ETSI (CE)

This module complies with the following European EMI/EMC and safety directives and

standards:

ETSI EN 300 328 V1.8.1:2012

EN 301 489-1 V1.9.2:2011 + EN 301 489-17 V2.2.1:2009

EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

EN 62479:2010

X-NUCLEO-IDW01M1

Hardware Schematics

DocID028561 Rev 3

3/8

2 Hardware Schematics

2.1 STM32 Nucleo connectors

The figure below details the STM32 Nucleo connectors both ST morpho and Arduino UNO

R3.

Figure 1: STM32 Nucleo connectors

Hardware Schematics

X-NUCLEO-IDW01M1

4/8

DocID028561 Rev 3

2.2 SPWF01SA module

This section provides some information regarding the SPWF01SA Serial-to-Wi-Fi b/g/n

intelligent modules (order code: SPWF01SA.11). More detailed information can be found at

the www.st.com web site.

The main features of the SPWF01SA module are:

2.4 GHz IEEE 802.11 b/g/n transceiver

STM32 ARM Cortex-M3, with 64 KB RAM and 512KB Flash memory

1 MByte extended FLASH for FW update

Over the air (FOTA) only on SPWF01Sx.1y

Integrated TCP/IP protocol stack

8 Simultaneous TCP or UDP clients and 1 Socket server

1 TLS/SSL Socket client supporting up to TLS 1.2, including common encryption

algorithms: AES (128,256), hash (MD5, SHA-1, SHA-256) and public key

algorithms (RSA, ECC).

Web server supporting dynamic web pages

RESTful API to get & post web content

WEP/WPA/WPA2 personal security

System modes: station, IBSS, and miniAP

miniAP easily provisioned (SSID, PWD)

Industrial temperature range: -40 °C to 85 °C

SPWF01SA is a fully FCC/IC/CE certified module.

It is suitable for evaluating Wi-Fi connectivity in the following applications:

smart appliances

industrial control and data acquisition

home automation and security systems

Wireless sensors

cable replacement

medical equipment

machine-to-machine communication

Very small module footprint with easy to solder/inspect pin array

X-NUCLEO-IDW01M1

Hardware Schematics

DocID028561 Rev 3

5/8

Figure 2: SPWF01SA module footprint

2.3 STM32 Nucleo connections

The X-NUCLEO-IDW01M1 expansion board is designed to be plugged directly on the

STM32 Nucleo board connectors. The X-NUCLEO-IDW01M1 is configured by default to be

compatible with the highest number of STM32 Nucleo boards possible. It may be also be

configured, via resistor placement, to use different I/O configurations in order to match

specific customer targets. Refer to the X-NUCLEO-IDW01M1 user manual for more

detailed information regarding the possible I/O configuration options.

Check to see if resistor R21 is present; if it is, please remove it as it may interfere with

JTAG debug.

2.4 EEPROM

The module has an embedded EEPROM used to host web pages and/or firmware over the

air (OTA) to remotely update the module firmware images.

Hardware Schematics

X-NUCLEO-IDW01M1

6/8

DocID028561 Rev 3

2.5 Schematic diagram

Figure 3: X-NUCLEO-IDW01M1 board schematic

X-NUCLEO-IDW01M1

Revision history

DocID028561 Rev 3

7/8

3 Revision history

Table 1: Document revision history

Date

Version

Changes

06-Nov-2015

Initial release.

23-Feb-2016

Updated cover page description.

23-Jun-2016

Updated board photo on the cover page.

X-NUCLEO-IDW01M1

8/8

DocID028561 Rev 3

IMPORTANT NOTICE –PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and

improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST

products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order

acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the

design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

Andere Handbücher für X-NUCLEO-IDW01M1

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST STEVAL-MKI109V2 Bedienungsanleitung

ST STM3210E-EVAL Bedienungsanleitung

ST SPC570S Series Montage- und Bedienungsanleitung

ST STR910-EVAL Bedienungsanleitung

ST STEVAL-PCC010V1 Bedienungsanleitung

ST B-L4S5I-IOT01A Bedienungsanleitung

ST STFPC311 Bedienungsanleitung

ST AEK-MOT-TK200G1 Bedienungsanleitung

ST STEVAL-1PS03A Bedienungsanleitung

ST STEVAL-IHM031V1 Bedienungsanleitung

ST STM3220F-EVAL Bedienungsanleitung

ST STEVAL-ISB041V1 Bedienungsanleitung

ST STM32L073Z-EVAL Bedienungsanleitung

ST STR730-EVAL Bedienungsanleitung

ST STM32303C-EVAL Bedienungsanleitung

ST STEVAL-IPP003V1 Kurzanleitung

ST AEKD-USBTYPEC1 Bedienungsanleitung

ST STM32F401 Discovery Bedienungsanleitung

ST M24SR-DISCOVERY Bedienungsanleitung

ST AN3959 Montage- und Bedienungsanleitung

ST STM8L101-EVAL Bedienungsanleitung

ST UM0920 Bedienungsanleitung

ST STSW-STUSB002 Bedienungsanleitung

ST SPC560P-DISP Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung