Stanley TLR-EC3215T Bedienungsanleitung

Model: TLR-EC3215T

TV Mount Installation Guide

Thank you for choosing Stanley – the hardware of choice

for Architects, Contractors, and Home Owners for its quality,

performance and dependability.

Enclosed are your step-by-step instructions for an install made

easy.

If you get stuck, give customer service a call at 1-855-816-6868

You can also reach us at contact@stanleymounts.com

www.stanleymounts.com

Getting Started

Before we start lets make sure we have the correct mount and all

the required tools and hardware to complete the installation.

The TV is a Flat Panel TV is between 32” - 70” and weighs no more than

110lbs.

The Wall the TV will be mounted on is either concrete or dry wall with

wood studs.

You have all of the following tools:

If you answer “Yes” to all the questions above then you are ready

to begin the TV Mount installation!

!Caution: Please read the entire manual before proceeding

View warranty and disclaimer on page 15

Drill Screwdriver Pencil Level Stud Finder Tape Measure Hammer Wrench Drillbit

Check out our free level app in the app store!

Parts & Hardware

Caution: Before starting assembly, verify all parts are included and undamaged. If any parts are missing or

damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged

parts or previously used parts!

A6 x4 B1 x4 B2 x4 B3 x4

A2 x4 A3 x4 A4 x4 A5 x4

Wall Plate

For attaching Brackets to TV

Spacers Lag Bolts

Concrete

Anchors Washers

Caution: This product contains small items that could be a choking hazard if swallowed.

A1 x4

M8 x 25mm

TV Screws

M6 x 25mm

M5 x 25mm

M4 x 25mm

Square

Washers

For attaching Wall Plate

Left TV Bracket

Right TV Bracket

Hand thread screws into the

threaded inserts on the back

your TV to determine which

Screw diameter to use.

Determine whether your TV

has a at back or an irregular

or obstructed back.

Select TV Screws

Too Short Too LongCorrect

If the back of your TV is Flat

Mount the spacers A5

above the TV bracket.

If the back of TV is

Irregular/Round;

Inset holes:

Mount the spacers A5

under the TV bracket.

2Flat Back

TV bracket.

Irregular back

Insert Hole

TV bracket.

A2 A3 A4A1

M8 x 25mm

M6 x 25mm

M5 x 25mm

M4 x 25mm

Install TV bracket with the screw

and washer or spacer you selected

for your TV.

Tools Required:

Step 1: Attach TV Bracket

Position your TV bracket over your

TV hole pattern, making sure the

brackets are vertically centered and

level.

A5 A6

A1 or A2 or A3 or A4

Screwdriver

A5 A6

A1or A2 or A3 or A4

TV with Flat Back:

Mount the spacers A5

above the TV bracket.

Mount the spacers A5

under the TV bracket.

TV with Irregular/Round back; Inset holes:TV with Flat Back

Caution: Hand tighten with screwdriver only,

over tightening may damage the TV!

!Do not use a power tool for this step!

Caution: If you are unable to line up the hardware

with the TV, please call: 1-855-816-6868

Note: For Concrete skip to Step 2B

Use the stud nder to locate

2 studs, and then draw

a vertical line on the center of

each stud.

Level wall plate and align

at center of studs. Make 4

pencil marks to indicate

where to drill.

Tools Required:

Pencil Level Stud Finder Caution:

The minimum size of the wood stud must be

1 1/2”x 3 1/2”(38x 89mm)

The thickness of dry wall must not exceed

5/8”(16mm).

Step 2A: Install Wall Plate on Drywall with Wood Stud

!Min. 1 1/2”

(38mm)

Min. 3 1/2”

(89mm)

!Max. 5/8”

(16mm)

Caution:

not all walls have conventional

16”(406mm) or 24”(610mm)

standard stud spacing.

Remove the wall plate and

drill the pilot holes with a

3/16” drill bit

Align the wall plate with the

pilot holes and insert 4 bolts

through the washer in the

pilot holes and tighten.

Tools Required:

Drill 3/16” Drill Bit

3 in.

(75 mm)

3/16 in.

(5 mm)

Level the wall plate and

make 4 marks with pencil to

show where to drill the pilot

holes.

Remove the wall plate and

drill the pilot holes with a 3/8”

drill bit.

Tools Required:

1 2

Pencil Level Drill

3/8” Drill Bit Caution: The minimum depth of the concrete must be 8”.

Do not drill pilot holes into the mortar between the concrete.

Step 2B: Install Wall Plate on Concrete

3/8 in.

(10 mm)

3 in.

(75 mm)

Insert the anchors into the

4 pilot holes. Tap with

hammer

Align wall plate with pilot

holes and anchors. Insert

4 bolts through washers and

anchors then tighten with

wrench.

Tools Required:

Hammer Wrench

Step 3: Hang Your TV

To hang your TV, clip the TV

Rails to the mounted wall

plate.

After the TV is hanging properly

on the wall mount, press on

the bottom of the TV to lock it

in place.

1 3

Warning: TV should always be lifted by 2 people.

Fasten 2 screws to secure the

bracket.

is locked in place

Listen for a “Click” to ensure mount

“snap”

“click”

Inhaltsverzeichnis

Andere Stanley TV-Halterung Handbücher

Stanley

Stanley TMR-105T Bedienungsanleitung

Stanley

Stanley TLX-350FM Bedienungsanleitung

Stanley

Stanley TLX-105FM Bedienungsanleitung

Stanley

Stanley TLS-120T Bedienungsanleitung

Stanley

Stanley TMS-DS1113T Bedienungsanleitung

Stanley

Stanley TLR-EC3211T Bedienungsanleitung

Stanley

Stanley TLS-210S Bedienungsanleitung

Beliebte TV-Halterung Handbücher anderer Marken

Ergotron

Ergotron Neo Flex Cantilever UHD Bedienungsanleitung

StarTech.com

StarTech.com FPCEILBTB Bedienungsanleitung

VonHaus

VonHaus 05/038 Bedienungsanleitung

Techlink

Techlink ECHO TV Bedienungsanleitung

Sandstrom

Sandstrom SSTVMC12X Bedienungsanleitung

Sony

Sony SU-WL700 Leitfaden

ICW

ICW SCACC18 Bedienungsanleitung

LG WM-L640V Bedienungsanleitung

Gembird

Gembird WM-65ST-01 Bedienungsanleitung

ERARD

ERARD FiTUP XXL 035320 Bedienungsanleitung

PEERLESS

PEERLESS PLCK-1 Leitfaden

Kanto

Kanto RCF180 Bedienungsanleitung

GEM

GEM GEM GP001 Bedienungsanleitung

Gladiator Joe

Gladiator Joe GJ0A0053 Bedienungsanleitung

Vivotek

Vivotek AM-105 Bedienungsanleitung

Vivo

Vivo VESA STAND-VAD1B Bedienungsanleitung

AmazonBasics

AmazonBasics B07QG3LMG4 Bedienungsanleitung

Secura

Secura QLF210 Bedienungsanleitung