Star Micronics Star SCP700 Series Bedienungs- und Wartungshandbuch

COMBINATION PRINTER

SCP700 SERIES

Programmer’s Manual

Trademark acknowledgments

SCP700

: Star Micronics Co. Ltd.

ESC/POS, TM-295, TM-T85

: Seiko Epson Corporation

Notice

mission, is strictly forbidden.

• The contents of this manual are subject to change without notice.

• All efforts have been made to ensure the accuracy of the contents of this manual at the time of printing. However,

should any errors be found, STAR would greatly appreciate being informed of them.

• The above notwithstanding, STAR can assume no responsibility for any errors in this manual.

TABLE OF CONTENTS

Chapter 1: Outline ........................................................................................1

Chapter 2: DIP Switch Settings ..................................................................2

Accessing the DIP switches ........................................................2

Available DIP switch settings .....................................................3

Chapter 3: Memory Switch Settings ...........................................................6

Chapter 4: Control Panel Operations ........................................................7

Indicator lights ............................................................................7

Buttons ........................................................................................8

Producing a test print ..................................................................8

Adjusting the slip printer’s dot alignment ..................................9

Hexadecimal dump ...................................................................11

Errors ........................................................................................11

Chapter 5: Standard Serial Interface .......................................................13

Standard serial interface pins and signal names .......................14

Interface connections ................................................................15

Data protocol .............................................................................16

Chapter 6: Optional Interface ...................................................................21

Optional serial interface ............................................................21

Optional serial interface pins and signal names ........................22

Interface connections ................................................................23

Data protocol .............................................................................23

Optional parallel interface ........................................................24

Optional parallel interface pins and signal names ....................25

Chapter 7: Peripheral Unit Driver Circuit ..............................................27

Modular plug .............................................................................27

Drive circuit ..............................................................................28

Chapter 8: Automatic Cutter ....................................................................29

Chapter 9: Control Codes ..........................................................................30

Chapter 10: ESC/POS Mode .......................................................................83

TM-T85 mode ...........................................................................83

TM-295 mode ...........................................................................85

TM-295 mode emulation cautionary items ...............................86

Appendix: Character Code Tables .............................................................88

Please access the following URL

http://www.star-micronics.co.jp/service/sp_sup_e.htm

for the lastest revision of the manual.

[Blank page]

Chapter 1: Outline

The SCP700 Series combines both a quick, quiet and highly reliable thermal

receipt printer with an impact dot slip printer, enabling printing on single or

multiple sheets of slip paper of an unspecified size.

The thermal printer enables receipt printing without a thermal ribbon and makes

paper insertion extremely easy.

The biggest advantage of combining the two printer mechanisms into one unit

is that less space, only one power supply and only one port are necessary,

compared with using a slip printer which is separate from a thermal receipt

printer, each requiring space and a power supply.

Thermal printing on receipt paper is quiet and fast.

Chapter 2: DIP Switch Settings

The printer’s DIP switches let you change communications parameters, thermal

printing density, interface type, input buffer size, and emulation. This chapter

explains the settings you can make and tells you how to actually change DIP

switch settings.

Accessing the DIP switches

The DIP switches are located inside the printer, underneath the document table.

Use the following procedure to remove the document table so you can operate

the DIP switches.

❏

Make sure that the printer is turned off and unplugged from its wall outlet.

❏

Open the printer cover.

❏

Use a Phillips head screwdriver to remove the two screws that secure the

document table in place.

❏

Carefully work the document table loose and slide it to the left of the

printer out of the way. It is not necessary to remove the document table

complete, just move it enough so you can get at the DIP switches inside.

❏

After the document table is opened sufﬁciently, use a thin ﬂat-blade

screwdriver or some other similar object to change DIP switch settings.

❏

Carefully return the document table to its original position and secure it in

place with the two screws.

Available DIP switch settings

There are two DIP switches inside the printer, named DIP Switch 1 and DIP

Switch 2. DIP Switch 1 controls data communication parameters, while DIP

Switch 2 controls other settings.

OFF

DIP Switch 1

The following table shows all the possible settings for DIP Switch 1. This

switch sets the transmission parameters of the Standard Serial Interface. All

switch settings, except for 1-7 and 1-8, are ON when the printer is shipped from

the factory.

DIP Switch 2

The following table shows all the possible settings for DIP Switch 2. The

factory default setting for this switch is all ON.

Switch Parameter ON OFF

1-1 Baud Rate See table below

1-2

1-3 Data Length 8 bits 7 bits

1-4 Parity Check Disabled Enabled

1-5 Parity Selection Odd Even

1-6 Handshake DTR/mode XON/XOFF

mode

1-7 Serial I/F Pin 6 Reset Signal Active Inactive

1-8 Serial I/F Pin8 Reset Signal Active Inactive

Baud Rate Switch 1-1 Switch 1-2

2400BPS OFF OFF

4800BPS ON OFF

9600BPS ON ON

19200BPS OFF ON

Switch Parameter ON OFF

2-1 Thermal Print Density See table below

2-2

2-3 Input Buffer Size 4 KB 45 bytes

2-4 Always ON

2-5 Interface Standard Option

2-6 Always ON

2-7 Not Used

2-8 Not Used

Thermal Print Density Switch 2-1 Switch 2-2

Light OFF OFF

Standard ON ON

Heavy ON OFF

Very Heavy OFF ON

Switch Parameter ON OFF

Chapter 3: Memory Switch Settings

Each memory switch is a 16-bit word store in EEPROM. For details on the

functions and settings of memory switches, refer to “Chapter 9”.

The table below shows the factory settings for the memory switches.

Memory Switch Hexadecimal Code

0 0000

1 0000

2 0000

3 0000

4 0000

5 0000

Andere Handbücher für Star SCP700 Series

Inhaltsverzeichnis

Andere Star Micronics Drucker Handbücher

Star Micronics

Star Micronics mC-Print3 MCP31L Kurzanleitung

Star Micronics

Star Micronics NX-1001 Bedienungsanleitung

Star Micronics

Star Micronics SP200 Series Bedienungsanleitung

Star Micronics

Star Micronics SP2000 Bedienungsanleitung

Star Micronics

Star Micronics SB-10 Bedienungsanleitung

Star Micronics

Star Micronics SP500 Series Bedienungsanleitung

Star Micronics

Star Micronics Star SCP700 Series Bedienungs- und Wartungshandbuch

Star Micronics

Star Micronics TUP592 Bedienungsanleitung

Star Micronics

Star Micronics PW2000-24 Bedienungsanleitung

Star Micronics

Star Micronics TSP100LAN Bedienungsanleitung

Star Micronics

Star Micronics TSP700 Series Bedienungsanleitung

Star Micronics

Star Micronics TSP600 Series Bedienungs- und Wartungshandbuch

Star Micronics

Star Micronics TSP400 Series Bedienungs- und Wartungshandbuch

Star Micronics

Star Micronics LC-15 Bedienungsanleitung

Star Micronics

Star Micronics TSP143IIIBI Bedienungsanleitung

Star Micronics

Star Micronics LC-6211 Bedienungsanleitung

Star Micronics

Star Micronics LC-7211 Bedienungsanleitung

Star Micronics

Star Micronics TSP200 Series Bedienungs- und Wartungshandbuch

Star Micronics

Star Micronics TSP654II Gebrauchsanweisung

Star Micronics

Star Micronics Radix Bedienungsanleitung

Star Micronics

Star Micronics NP-266S Montageanleitung

Star Micronics

Star Micronics SR-10/I5 Bedienungsanleitung

Star Micronics

Star Micronics NP-IO Bedienungsanleitung

Star Micronics

Star Micronics TSP100LAN Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung