Starblitz ASPIC Bedienungsanleitung
EN
FR
ES
ASPIC
User guide /
Mode d’emploi /
Manual de usuario
www.starblitz.fr
1
EN
FR
ES
Wireless ash
STARBLITZ® ASPIC
User guide
Thank you very much for selecting Starblitz® ASPIC wireless TTL ash light. Please
read these instruction carefully and keep them handy for your reference.
Starblitz® ASPIC TTL studio ash for location shoot, 400Ws (GN 70), 1/8000s high sync
speed, with build- in T TL receiver. Locking SST-818 TX transmitter on camera, you
can total control with remote Starblitz® ASPIC studio ashes, such as TTL/ M/ Multi,
without leaving shooting place. Whether shoot in bright sunshine with wide open
aperture, shoot during fast moving events, or shoot in scene where ambient light
varies, the reliable TTL wireless trigger and 1/8000s high sync speed, makes photo-
graphy with more exibility, freedom and eciency. Starblitz® ASPIC is perfect tool
for shooting portraits, weddings and sports, allowing you to get perfect shot anytime
and anyplace
2
EN
FR
ES
Sommaire
Safety Note............................................................................................................... 3
Warning Sign............................................................................................................ 3
Content of Carton .................................................................................................... 4
Name of Parts........................................................................................................... 4
Operation Panel....................................................................................................... 6
LCD Screen ............................................................................................................... 4
Prepare ash for use................................................................................................ 8
Switch on Flash Light .............................................................................................. 9
Power Level .............................................................................................................. 9
Charging Battery ................................................................................................... 10
Battery Protective Maintenance .......................................................................... 10
Operating Audible Beep ....................................................................................... 11
Operating Modeling Lamp ................................................................................... 11
Select Triggering Ways .......................................................................................... 11
Wireless Mode........................................................................................................ 12
Setting Channel and Group .................................................................................. 12
Flash Mode-TTL Auto Flash................................................................................... 13
Flash Mode-Multi Stroboscopic Flash.................................................................. 15
Flash Mode-M Manual Flash................................................................................. 16
Constant Color Mode ON/OFF .............................................................................. 17
Use Starblitz® ASPIC with other ashes............................................................... 18
Error codes ............................................................................................................. 18
Auto-dump............................................................................................................. 19
Installing Umbrella................................................................................................ 19
Changing Flash Tube ............................................................................................. 20
Flash Capacitor Preventative Maintenance......................................................... 22
USB Firmware Update ........................................................................................... 22
Main features ......................................................................................................... 22
Features.................................................................................................................. 23
3
EN
FR
ES
Safety Note
Do not use the unit in an environment where moisture or ammable vapor is likely
to come in contact with the unit.
Do not explore any components in direct sun for a long time. Do not restrict air
vents while in use.
Do not use a unit with damaged covers, ash tubes, modeling lamps. If the unit is
dropped or damaged in any way, always have it checked out before using it. Do not
place ammable materials close to either the ash tube or the modeling lamp when
the unit is in use.
Do not attempt to disassemble or service the unit on your own to avoid shock
hazard. Only ash tubes and batteries may be replaced on your own.
Do not drop foreign objectives inside the housing. There is a risk of electrical
shock. Always use a blower brush or clean facial tissue to remove dust and moisture
from the modeling lamp and the ash tube.
Always turn o the unit whenever mounting or dismounting accessories. Always
turn o the unit and remove battery before maintenance.
Always keep out of reach of children.
Warning Sign
The manual is based on the assumption that both camera and ash light are
powered on.
The following alert symbol is used in this manual:
This Caution symbol indicates a warning to avoid shooting problem.
4
EN
FR
ES
Content of Carton
Your Starblitz® ASPIC ash light should include the following items, please check
carefully:
1x Starblitz® ASPIC studio ash
1x Lithium battery (included in Starblitz® ASPIC studio ash)
1x LED modeling lamp (included in Starblitz® ASPIC studio ash)
1x 100-240V charger for lithium battery
1x Car charger adapter
1x Standard reector
1x Protective cover
1x Tripod head adapter
1x 4m Sync Cord
Name of Parts
1Standard Reector
2Operation Buttons
3LCD Screen
4Power Switch
5USB Upgrade Terminal
63.5MM Sync Cord Input
7Handle
8Adjusting screw
9Reector Releasing Knob
10 Battery Locking Knob
11 Replaceable Battery
5
EN
FR
ES
1
2
3
4
5
6
7
8
9
10
11
6
EN
FR
ES
Operation Panel
1
2
3
4
6
5
1«MODEL»
1. Shortly press: Control modeling lamp turn o/ 1/ 2 / 3 / 4 / 5/ 6 in sequence
2. Long press: 1. set channel 2. set group
2«AUDIO»
1. Shortly press: Turn ON / OFF
2. Long press: In Multi mode, set flash times and flash frequency
3«TEST»
Flash test
4«+»
Shortly press: Increase setting value
5«MODE»
1. Shortly press: switch ash mode ETTL auto ash/M manual ash/ Multi strobos-
copic ash
2. Long press: Set color temperature mode
6«–»
Shortly press: Reduce setting value
7
EN
FR
ES
LCD Screen
1
12 13 14 15
5
9
10
11
6
7
8
2 3 4
1Supported TTL mode
2M manual mode/ Multi stroboscopic mode
3Channel 1,2,3,4
4Group A, B, C
5Battery level indicator
6Stroboscopic ash times
7Error indicator
8Modeling lamp ON
9Manual ash output/ Flash exposure compensation (FEC)
10 Stroboscopic ash frequency / Manual ash output
11 Flash recycling ready
12 Modeling lamp output
13 2.4G wireless radio signal
14 Audio beep
15 Flash recycling indicator
8
EN
FR
ES
Prepare ash for use
1. Fix Flash on Light Stand
Select a light stand or support system of suitable weight and dimensions to ensure
stable operation of the unit. Rotate knob clockwise to lock ash unit rmly on sup-
port system.
The ash unit includes a 1/4”Tripod head adapter. It applies to x on camera tripods
or other support system with 1/4” screw.
2. Release Protective Cap
To remove protective cap, push reector release knob back towards the rear of the
unit and rotate protective cap anti clockwise (Fig 1). Put the protective cap aside.
To avoid deformation of plastic protective cap, always cool down ash unit before
tting protective cap.
3. Install Standard Reector
Install standard reector where the protective cap was before. Align the three pegs
on the reector with the three slots, press the reector in and rotate clockwise until
it locks in place(Fig 2 & 3 ).
Always switch o the unit before tting and changing reectors.
4. Adjust Flash Light Angel
Rotate regulating screw anticlockwise, adjust the unit to appropriate angle. Rotate
regulating knob clockwise to tight ash head.
5. Install Battery
Push battery forward until hear a clicking sound (Fig. 4).
Switch o power before remove battery. Press down lock button and move it
backward (Fig. 5).
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Starblitz Kamerablitz Handbücher
