Stardom SOHORAID SR4-SB3PLUS Bedienungsanleitung

SOHORAID

User Manual

SR4-SB3+

» SafeTANK SR4-SB3+ User Manual ...........................1

1. Environmental Requirements .........................................................1

2. Package Contents and Product Views ...........................................1

3. Hardware Requirements and Precautions .....................................3

4. Hardware Installation Procedure ....................................................4

5. Description of Front Panel Operation and LCD Information...........5

6. Replacement of Malfunctioning Drive and Data Rebuild

Instructions............................................................................................... 6

7. System Temperature Overheat and Fan Failure Management 6

» SafeTANK SR4-SB3+ 產品使用說明 .................... 7

1. 環境需求 .........................................................................................7

2. 產品外觀及包裝內容 .......................................................................7

3. 硬體需求與注意事項 .......................................................................9

4. 硬體安裝 .........................................................................................10

5. 前面板操做及 LCD 訊息說明 ..........................................................11

6. 故障硬碟更換步驟及資料重建功能說明 ..........................................12

7. 系統過熱與風扇故障狀況排除.........................................................12

8. 常見問題 .........................................................................................12

SR4-SB3+ User Manual

V1.0

SR4-SB3+ User Manual

2. Package Contents and Product Views

Introduction

Open the package and you shall nd the following parts：

SR4-SB3+

SR4-SB3+ x 1 ( with removable drive tray enclosed x 4)

USB 3.0 Cable x 1

eSATA Cable x 1

AC Power Cable x 1

Handle x1

Quick Installation Guide x 1

Screws & Keys

» SafeTANK SR4-SB3+ User Manual

Thank you for choosing the STARDOM product. This manual will familiarize you with the STARDOM

SR4-SB3+ product. We recommend reading through this manual before using the STARDOM SR4-

SB3+ product. The information provided in this manual was checked before publication, but the actual

product specications may have changed before shipping; Latest product specications and updates

can be found at www.STARDOM.com.tw. No separate notications will be provided by our company. If

you would like to receive the latest STARDOM product information, manuals, and rmware, or have any

questions regarding STARDOM products, please contact your local supplier or visit www.STARDOM.

com.tw for more information.

All product-related content in this manual are copyrighted by STARDOM TECHNOLOGY, INC.

• Please check the product and accessories for any defect or missing parts. If you have any questions,

please contact your product supplier.

• Please visit the oﬃcial website - Download page (http://www.stardom.com.tw/STARDOM2016/

download.php) to download drivers and other related resources.

1. Environmental Requirements

Operating Temperature: 0 ～40 ℃(32 ～104 ℉)

Storage Temperature : -20 ～47℃(-4 ～116 ℉)

Line Voltage : 100 ～240V AC

SR4-SB3+ User Manual

Product View

Front View

Rear View

Drive position(1)

Drive position(2)

Drive position(3)

Drive position(4)

A. HDD access light

B. HDD enclosure handle

C. HDD tray key lock

D. LCM display

E. System status light

F. Power status light

G. UP button

H. DOWN button

I. ENTER button

J. ESC button

K. Fan

L. Mute button

M. USB3.0 interface

N. eSATA interface

O. Power switch

P. Power socket

Q. Fan speed switch

R. Anti-theft lock

SR4-SB3+ User Manual

LED Indicators :

3. Hardware Requirements and Precautions

1. Only one interface connection may be used at once per computer system.

2. RAID volume formation utilizes the capacity of whichever hard drive has the smallest and then

multiply that capacity by three for RAID 5, four for RAID 0, to form a large volume, therefore,

it is recommended to only install hard drives of the same brand and specification for all drive

position prior to use. Moreover, when you need to replace with a new hard drive, please be sure

to purchase one with the same specication, capacity and brand. If these conditions can’t be met,

select one that’s at least 20 GB greater in capacity.

3. The actual storage capacity of SR4-SB3+ recognized by the system may differ from the total

capacity stated on the hard drives once the drives have been formatted.

4. When connected to the computer system, it’s prohibited to remove, insert or swap the hard drive

while data transfer is being performed.

5. It’s prohibited to change the positioning of the drives once the initial installation has been

completed as the changes made to the drive positions may destroy the RAID formation.

6. If you discover that hard drive failure is taking place, go to Section 6 “Replacement of

Malfunctioning Drive and Data Rebuild Instructions” and follow the steps accordingly.

7. Whenever turning off or unplugging the SR4-SB3+ from your computer system becomes

necessary, always remember to safely remove it from your operating system rst.

8. In RAID 5 mode, the system allows one single hard drive failure. If multiple drive failures occur

at once, it’s likely that all data stored in the system have been destroyed or lost. In RAID 0

mode, if one hard drive failure occurs, then all data maybe destroyed or lost. If this happens, we

recommend you to consult with a professional hard drive data recovery specialist to see if your

data may be recoverable.

9. When the fan speed switch is set to "Auto", the fan will run at full speed to accelerate the heat

dissipation if the temperature inside the machine exceeds 50 (± 10%)°C.

Constant Power LED Larm LED

HDD LED Buzzer

RAID JBOD RAID JBOD

No HDD Blue light always on — — — — — —

HDD Failed Blue light always on — — Red light

always on — — YES — —

Access Blue light always on — — Blue light ashing — —

Disk Idle Blue light always on — — Blue light always on — —

Rebuilding -

Source Blue light always on — — Blue light

ashing — — — —

Rebuilding -

Target Blue light always on — — Red light

ashing — — — —

Fan Failed Blue light always on Red light always on Blue light always on YES

Over Temp Blue light always on Red light always on Blue light always on YES

SR4-SB3+ User Manual

4. Hardware Installation Procedure

Please follow the instructions below to complete the hardware installation.

Place the system on a stable surface. Ensure that it is well ventilated without blockage tothe

vent and kept away from areas near water and damage prone areas.

Use the key included in the accessory kit and inserted into the key access opening to eject

the removable drive tray latch and extract the removable drive tray.

Step 1

Step 2

Mount your hard drives onto the removable drive tray and secure it with the screws included

in the accessory kit to avoid any damage to the hard drive due to accidental movements.

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

When the hard drive installation has been completed, insert the hard drive tray into the

system horizontally and secure the latch into place.

Connect the AC power cable to the SR4-SB3+, and then plug the AC power to the wall

socket. Boot-up the unit.

Set the storage mode using the LCD and buttons on the front (please refer to section 5 for

front panel and LCD information).

Connect the cable to the PC and the SR4-SB3+ port.

After boot-up, your operating system will automatically detect the storage capacity of your

hard drives. Please follow the operating system instructions to congure and format your

drives. The formatted drives can be congured for the RAID setup.

10.It is highly recommended for users to back up important data contained within the SR4-SB3+

unit on a regular basis or whenever the user feels necessary to a remote or a separate storage

device. STARDOM will not be responsible for any lost of data caused during the use of the unit or

the recovery of the data lost.

SR4-SB3+ User Manual

5. Description of Front Panel Operation and LCD Information

Front Panel Operation:

Enter: Enter: Enter to next level or Conrm

Esc: Back to next level or Cancel

Up / Down: Select Items

Users can set the RAID mode using the LCD and buttons on the front. The default is JBOD mode.

Using “Quick Setup” function, users can change the RAID mode to RAID 0 or RAID 5 quickly.

Please refer to LCD Information as below for other setting:

Level 0 Level 1 Level 2 Level 3 Level 4

External 4BAY

HARDWARE

RAID

Quick Setup Create One RAID RAID 0/ RAID 5 Select Disk

Delete All RAID

Disk Manager Identify Disk

Disk 1 Check Disk LED

Disk 2 Check Disk LED

Disk 3 Check Disk LED

Disk 4 Check Disk LED

Show Disk Info < Disk Info >

RAID Manager

Identify RAID Select RAID

Create RAID RAID 0 / RAID 5 Select Disk

Delete RAID Select RAID

RAID Info ― ―

Change RAID Pwd < Password > for RAID Setup

Rebuilding Priority Highest/High/Medium/Low/Lowest

System Manager

System Info Firmware Version

Changhe Password < Password > for System Info

Logout From Menu < Y or N >

Alarm Control Mute the Buzzer

Hardware Monitor

Temp. Monitor < Temp. >

Fan Monitor < Fan Speed /

Fan Level >

SR4-SB3+ User Manual

Q1. Which drive format should I choose to format the hard drives in the SR4-SB3+?

A: It depends on the computer system you most often use. See the below suggestions:

1. Use NTFS format for Windows 2000/XP/Vista/7/8/10 system

2. Use HFS+ (Mac OS Extended) format for a Mac OS X system

3. Choose FAT32 format if you’ll use the SR4-SB3+ in both Windows and Mac environments (the

maximum size of one single le may not exceed 4 GB).

Q2. Why can’t my SR4-SB3+ reach the transfer performance speed of 200 MB/s via eSATA

interface as stated on your website?

A: 1. Please rst check if your PCI-E SATA host adapter would only support PCI-E (1X). This type

of host adapters cannot reach the transfer performance speed beyond 135MB/s.

2. The SR4-SB3+ will need to be set to the RAID 0 mode also.

6. Replacement of Malfunctioning Drive and Data Rebuild Instructions

7. System Temperature Overheat and Fan Failure Management

8. Frequently Asked Questions

1. Remove the drive tray containing the malfunctioned hard drive and disassemble the hard drive

from drive tray.

2. Mount the new hard drive onto the tray and insert it back to the empty drive position of the SR4-

SB3+, then push the latch into place making sure it is secured and locked.

3. In RAID 5 mode, when you turn the system on, the hard drive status indicator of the replacement

drive will interchangeably blink red and purple to inform that the data is being rebuilt to the

replacement drive. During data rebuild, you may operate the SR4-SB3+ as normal. When the

indicator stops, the data rebuild process has been completed.

If the alarm indicator has lit up red and the audio alarm sounds, this could mean that either a

system fan has stopped operating entirely or the system temperature has exceeded over the default

temperature of 55°C. When this occurs, you may press the mute button at the rear of the system to

shut o󰀨 the audio alarm and power o󰀨 the system immediately if in the allowed operational state to

let the system cool. Check and see if the overall operation environment is well ventilated and make

sure there are no blockages to the enclosed fan and then re-power on the system to continue use.

If the problem persists, please turn o󰀨 the system and contact your supplier or the STARDOM tech

support for further assistance.

When a front hard drive indicator has lit up red and the audio alarm sounds, this could mean the

indicated hard drive may be malfunctioning. If this occurs, you may press the mute button at the

rear of the system to shut o󰀨 the audio alarm and power o󰀨 the system immediately if in the allowed

operational state, and then re-power on the system to double check and see if in fact the indicated

hard drive has malfunctioned. If the problem persists, please turn off the system and follow the

directions below :

SR4-SB3+ User Manual

2. 產品外觀及包裝內容

關於這份手冊

打開包裝外盒後，包裝內容應包含下列組件：

SR4-SB3+

SR4-SB3+ 產品本體 X1( 內含抽取盒 x4)

USB3.0 連接線 x1

eSATA 連接線 x1

AC 電源線 x1

把手 x1

快速安裝導引 x 1

螺絲及鑰匙

» SafeTANK SR4-SB3+ 產品使用說明

感謝您使用 STARDOM 的產品。本手冊將介紹 STARDOM SR8-TB3 產品。在您開始使用 STARDOM

SR8-TB3 產品前，建議您先閱讀過本手冊。手冊裡的資訊在出版前雖已被詳細確認，實際產品規格仍

將以出貨時為準；任何產品規格或相關資訊更新請您直接到 www.STARDOM.com.tw 網站查詢，本公

司將不另行通知。若您想獲得 STARDOM 最新產品訊息、使用手冊、韌體 ,或對 STARDOM 產品有任

何疑問，請您聯絡當地供應商或到 www.STARDOM.com.tw 取得相關訊息。

1. 環境需求

工作溫度：0 ~ 40 oC (32 ~ 104 oF)

儲存溫度：-20 ~ 47 oC (-4 ~ 116 oF)

相對濕度：5% 至95% 非冷凝狀態

工作電壓：100~240V AC

• 請確認相關配件與產品本身是否有受損或配件缺少，若有任何疑問請與本產品供應商聯絡。

• 請前往官網 -產品資料下載頁面 (http://www.stardom.com.tw/STARDOM2016/download.php) 下載

驅動程式以及其餘相關資源。

SR4-SB3+ User Manual

正面與背面示意圖

正面圖

背面圖

硬碟位置 1

硬碟位置 3

硬碟位置 2

硬碟位置 4

A. 硬碟讀取燈

B. 硬碟抽取盒把手

C. 硬碟卡榫按鍵

D. LCM 顯示幕

E. 系統指示燈

F. 電源指示燈

G. UP 按鍵

H. DOWN 按鍵

I. ENTER 按鍵

J. ESC 按鍵

K. 風扇

L. 靜音開關

M. USB3.0 連接埠

N. eSATA 連接埠

O. 電源開關

P. 電源插座

Q. 風扇轉速切換按鈕

R. 防竊鎖孔

Inhaltsverzeichnis

Andere Stardom Lagerung Handbücher

Stardom

Stardom SA2TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID DR8-TB2 Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID SR2 Bedienungsanleitung

Stardom

Stardom SOHORAID ST2-B31+ Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-SB31+ Bedienungsanleitung

Stardom

Stardom SR3610 Series Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-TB2 Bedienungsanleitung

Stardom

Stardom ZR2-BA31BP Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-SB3 Bedienungsanleitung

Stardom

Stardom SOHORAID ST2-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID DR2-B31 Bedienungsanleitung

Stardom

Stardom sohoraid ST2-B31 Bedienungsanleitung

Stardom

Stardom SOHORAID DR2-TB2 Bedienungsanleitung

Stardom

Stardom sohoraid ST2-B31 Bedienungsanleitung

Stardom

Stardom iTANK MT1-B31BP Bedienungsanleitung

Stardom

Stardom ST5610-4S-WB Bedienungsanleitung

Stardom

Stardom Raidon GT2660-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID ST2-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID ST2-B31+ Bedienungsanleitung

Stardom

Stardom SOHOTANK US2-B32 Bedienungsanleitung

Stardom

Stardom SA2TB2 Bedienungsanleitung

Stardom

Stardom SOHORAID DR8M-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID SR3MSB-B31 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung