Stardom Sohoraid SR4 Bedienungsanleitung

SOHORAID

User Manual

SR4 Series

(NO SATA)

» SafeTANK SR4 Series (NO SATA) User Manual........1

1. Environmental Requirements ....................................................................................1

2. Package Contents and Product Views ......................................................................1

3. Hardware Requirements and Precautions ................................................................3

4. Hardware Installation Procedure ...............................................................................4

5. Description of Front Panel Operation and LCD Information......................................5

6. Support DisplayPort ..................................................................................................16

7. Support USB Power Delivery (SR4-B31+/SR4-BA31+) ............................................16

8. Replacement of Malfunctioning Drive and Data Rebuild Instructions...............17

9. System Temperature Overheat and Fan Failure Management..............................17

10. Frequently Asked Questions ...................................................................................17

» SafeTANK SR4 Series ( 無SATA) 產品使用說明 .. 18

1. 環境需求 ....................................................................................................................18

2. 產品外觀及包裝內容 ..................................................................................................18

3. 硬體需求與注意事項 ..................................................................................................20

4. 硬體安裝 ....................................................................................................................21

5. 前面板操作及 LCD 訊息說明 .....................................................................................22

6. 支援 Display 埠..........................................................................................................33

7. 支援 USB Power Delivery (SR4-B31+/SR4-BA31+) .................................................33

8. 故障硬碟更換步驟及資料重建功能說明 .....................................................................34

9. 系統過熱與風扇故障狀況排除....................................................................................34

10. 常見問題 ..................................................................................................................34

SR4 Series User Manual

V1.0

SR4 Series User Manual

2. Package Contents and Product Views

Introduction

Open the package and you shall nd the following parts：

» SafeTANK SR4 Series User Manual

Thank you for choosing the STARDOM product. This manual will familiarize you with the STARDOM

SR4 product. We recommend reading through this manual before using the STARDOM SR4 product.

The information provided in this manual was checked before publication, but the actual product

specications may have changed before shipping; Latest product specications and updates can be

found at www.STARDOM.com.tw. No separate notications will be provided by our company. If you

would like to receive the latest STARDOM product information, manuals, and rmware, or have any

questions regarding STARDOM products, please contact your local supplier or visit www.STARDOM.

com.tw for more information.

All product-related content in this manual are copyrighted by STARDOM TECHNOLOGY, INC.

• Please check the product and accessories for any defect or missing parts. If you have any questions,

please contact your product supplier.

• Please visit the oﬃcial website - Download page (http://www.stardom.com.tw/STARDOM2016/

download.php) to download drivers and other related resources.

1. Environmental Requirements

Operating Temperature: 0 ～40 ℃(32 ～104 ℉)

Storage Temperature : -20 ～47℃(-4 ～116 ℉)

Line Voltage : 100 ～240V AC

SR4-BA31+ product x1

(with removable drive tray enclosed x 4)

SR4-B31+ product x1

(with removable drive tray enclosed x 4)

SR4-B31A product x1

(with removable drive tray enclosed x 4)

USB 3.2 C to C cable x1 USB 3.2 C to C cable x1 ――

USB 3.2 C to A cable x1 ――USB 3.2 C to A cable x1

Power Cable x1 Power Cable x1 Power Cable x1

Handle x1 Handle x1 Handle x1

Quick Installation Guide x1 Quick Installation Guide x1 Quick Installation Guide x1

Screws & Ejector pins Screws & Ejector pins Screws & Ejector pins

SR4 Series User Manual

Product View

Front View

Rear View

A. HDD access light

B. HDD enclosure handle

C. HDD enclosure pin release

D. LCM display

E. Power touch switch

F. System status light

G. UP button

H. DOWN button

I. ESC button

J. ENTER button

K. Fan

L. Mute button

M. Display port

N. USB 3.1 port

O. Power main switch

P. Power socket

Q. Fan speed switch

R. Anti-theft lock

High

Low

SR4 Series User Manual

LED Indicators :

3. Hardware Requirements and Precautions

1. When connected to the computer system, it’s prohibited to remove, insert or swap the hard drive

while data transfer is being performed.

2. It’s prohibited to change the positioning of the drives once the initial installation has been

completed as the changes made to the drive positions may destroy the RAID formation.

3. The product needs to be restarted after adding or changing the RAID mode, and the update is

guaranteed to be the new RAID mode.

4. When the Notebook which support USB PD function is only connected to SR4-B31+/ SR4-BA31+,

SR4-B31+/SR4-BA31+ can provide up to 24W (12V/2A) power supply, but if then connected to

other power supply such like the original Notebook power supply, Notebook will automatically

judge which one will be the main power source, usually the one which can provide more Wattage

will be. At this time, SR4-B31+/SR4-BA31+ may be interrupted and re-identied by the Notebook.

Therefore, before connecting to other power supplies, please make sure that there are no data

accessed between Notebook and SR4-B31+/SR4-BA31+.

5. SR4-B31+/SR4-BA31+ can only provide 24W at most, which is different from the original

Notebook power supply. It mainly to extend the Notebook's usage time. Take Macbook Pro 13"

as an example, the original power supply is 60W, assuming it take 2 hours for it to fully charge

the battery , use SR4-B31+/SR4-BA31+ might need three times time. Therefore, if user need to

use Notebook for a long time, it is recommended to connect the original power supply rst before

connect SR4-B31+/SR4-BA31+.

6. Whenever turning off or unplugging the SR4 from your computer system becomes necessary,

always remember to safely remove it from your operating system rst.

7. It is highly recommended for users to back up important data contained within the SR4 unit on

a regular basis or whenever the user feels necessary to a remote or a separate storage device.

Stardom will not be responsible for any lost of data caused during the use of the unit or the

recovery of the data lost.

Status Power Touch Switch System status light HDD LED Buzzer

RAID JBOD RAID JBOD

Power Main

Switch is not on — — — — — — — —

Power O󰀨 Red light always on — — — — — —

No HDD Blue light always on — — Red light ashing — —

Access Blue light always on — — Blue light ashing — —

Disk Idle Blue light always on — — Blue light always on — —

Rebuilding -

Source Blue light always on — — Blue light

ashing — — — —

Rebuilding -

Target Blue light always on — — Purple light

ashing — — — —

Fan Failed Blue light always on Red light always on Blue light always on YES

Over Temp Blue light always on Red light always on Blue light always on YES

SR4 Series User Manual

4. Hardware Installation Procedure

Please follow the instructions below to complete the hardware installation.

Place the system on a stable surface. Ensure that it is well ventilated without blockage to

the vent and kept away from areas near water and damage prone areas.

Use the ejector pin included in the accessory kit and inserted into the pin release opening to

eject the removable drive tray latch and extract the removable drive tray.

For 3.5" HDD/SSD, please secure it by use six the larger screws included in the accessory

kit. For 2.5" HDD/SSD, please secure it by use four the smaller screws included in the

accessory kit.

When the hard drive installation has been completed, insert the hard drive tray into the

system horizontally and secure the latch into place.

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Connect the power cable to the SR4, and then plug the power to the wall socket. Boot-up

the unit.

Connect the USB cable to the computer and the SR4 relevant port respectively.

First turn the power main switch on the back of the product to “I” to turn the power on,

then gently press the power touch switch on the front of the product until the power

symbol " " will light red.

Set the storage mode using the LCD and buttons on the front (please refer to section 5 for

front panel and LCD information).

After boot-up, your operating system will automatically detect the storage capacity of your

hard drives. Please follow the operating system instructions to congure and format your

drives. The formatted drives can be congured for the RAID setup.

If the product is not in use at the moment, the product can be put into power-off mode:

rst press the power touch switcth on the front of the product until the power symbol

"" turns to red; to use the product, press the power touch switcth on the front of the

product until the power symbol " " turns to blue.

If the product is not used for a long time, please turn o󰀨 the product main power switch: rst

gently press the power touch switch on the front of the product until the power symbol " "

turns to red, then turn the power main switch on the back of the product to "O" to turn o󰀨 the

power.

Note: Please avoid using hard disk drives from di󰀨erent manufacturers or di󰀨erent

models from the same manufacturer as this may impact system performance.

※The product is in a state of near-complete power-off in shutdown mode, and the hard disk, LCM, and fan are all

out of operation, providing only a small portion of power for preparation for subsequent startup.

SR4 Series User Manual

5. Description of Front Panel Operation and LCD Information

Front Panel Operation:

Enter: Enter: Enter to next level or Conrm

Esc: Back to next level or Cancel

Up / Down: Select Items

Users can set the RAID mode using the LCD and buttons on the front. The default is JBOD mode.

Using “Quick Setup” function, users can change the RAID mode to RAID 0 or RAID 5 quickly.

Please refer to LCD Information as below for other setting:

Level 0 Level 1 Level 2 Level 3 Level 4

External 4BAY

HARDWARE

RAID

Quick Setup Create One RAID RAID 0/ RAID 5 Select Disk

Delete All RAID

Disk Manager Identify Disk

Disk 1 Check Disk LED

Disk 2 Check Disk LED

Disk 3 Check Disk LED

Disk 4 Check Disk LED

Show Disk Info < Disk Info >

RAID Manager

Identify RAID Select RAID

Create RAID RAID 0 / RAID 5 Select Disk

Delete RAID Select RAID

RAID Info ― ―

Change RAID Pwd < Password > for RAID Setup

Rebuilding Priority Highest/High/Medium/Low/Lowest

System Manager

System Info Firmware Version

Changhe Password < Password > for System Info

Logout From Menu < Y or N >

Alarm Control Mute the Buzzer

Hardware Monitor

Voltage Monitor < 3.3V / 5V / 12V >

Temp. Monitor < Temp. >

Fan Monitor < Fan Speed /

Fan Level >

EXTERNAL 4 BAY

HARDWARE RAID

═ ═ Main Menu ═ ═

Quick Setup

═ ═ Main Menu ═ ═

Disk Manager

═ ═ Main Menu ═ ═

RAID Manager

═ ═ Main Menu ═ ═

System Manager

Level 0 Level 1

SR4 Series User Manual

The following is the display status set for the rst time:

P7~8

P10~12

P13~15

Quick Setup :

Delete All RAID

═ ═ Main Menu ═ ═

Quick Setup

Level 1

Quick Setup :

Create One RAID

Quick Setup :

Delete All RAID

Level 2

Select Level :

RAID 0

Enter Password :

Are You Sure?

Enter :Yes Esc : No

Select Level :

RAID 5

Level 2

Quick Setup :

Create One RAID

Level 3 Level 4

SR4 Series User Manual

Note

Note 1. If you don’t want to set password, please press "ENTER" to go to next step.

Note 2. If user forgot the password, it will not be allowed to access the data from the storage or write new data

into it. STARDOM will not be held liable for the damage or loss of data you stored on the storage.

• If you did not set password before, please

press "ENTER" to go to next step.

Level 1 Level 2

Disk Manager :

Identify Disk

Disk Manager :

Show Disk Info

═ ═ Main Menu ═ ═

Disk Manager

SR4 Series User Manual

Andere Handbücher für Sohoraid SR4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stardom Lagerung Handbücher

Stardom

Stardom itank i310 Bedienungsanleitung

Stardom

Stardom DR2-B31 Bedienungsanleitung

Stardom

Stardom ZR2-BA31BP Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-TB2 Bedienungsanleitung

Stardom

Stardom SOHOTANK US2-B32 Bedienungsanleitung

Stardom

Stardom iTANK MT1-B31BP Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-SB3PLUS Bedienungsanleitung

Stardom

Stardom SR3610 Series Bedienungsanleitung

Stardom

Stardom iTANK i310-BA31 Bedienungsanleitung

Stardom

Stardom ZR3MS-B31 Bedienungsanleitung

Stardom

Stardom SOHORAID SR2-SB3+ Bedienungsanleitung

Stardom

Stardom SOHORAID MR2-B31BP Series Bedienungsanleitung

Stardom

Stardom SA2TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID DR8-TB2 Bedienungsanleitung

Stardom

Stardom SOHORAID ST2-TB3 Bedienungsanleitung

Stardom

Stardom SOHOTANK MS2-TB3 Bedienungsanleitung

Stardom

Stardom DR5-SB3 Bedienungsanleitung

Stardom

Stardom SOHORAID DR8M-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID SR8-TB3 Bedienungsanleitung

Stardom

Stardom SA2TB2 Bedienungsanleitung

Stardom

Stardom sohoraid ST2-B31 Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-SB3 Bedienungsanleitung

Stardom

Stardom SOHORAID DR2-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID DR2-TB2 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung