Stardom SOHORAID SR2-SB3+ Bedienungsanleitung

»STARDOM Safe Capsule Series User Manual .....................

»STARDOM Safe Capsule Serie Bedienungsanleitung ...........

»Série STARDOM Safe Capsule Manuel de l’utilisateur .........

»Manual de usuario de STARDOM Safe Capsule Serie ..........

»STARDOM Safe Capsule .......................

»STARDOM Safe Capsule シリーズユーザーマニュアル................

»STARDOM Safe Capsule....................

SOHORAID

SR2-SB3+

User Manual

SOHORAID SR2 Series User Manual

2

» SOHORAID SR2 Series User Manual ……………………………………………….3

» SOHORAID SR2 Serie Bedienungsanleitung ………..……………………………..9

» Série SOHORAID SR2 Manuel de l’utilisateur …………………..………………..16

» Manual de usuario de SOHORAID SR2 Series ………………….………………..23

» SOHORAID SR2 系列產品使說明 ………………………………..………………30

» SOHORAID SR2 シリーズユーザーマニュアル …………………………………..36

» SOHORAID SR2 시리즈 사용 설명서 …………………………………………………43

» SOHORAID SR2 系列产品使说明 …..……………………………………………50

SOHORAID SR2 Series User Manual

Thank you for purchasing STARDOM products. Before using your SOHORAID, please read this manual

thoroughly.

At time of publish, all information contained in this user manual has been verified. Before Product

specification will be based on the time of delivery from STARDOM. Any revision updates or important

technical information may be found on www.stardom.com.tw. Products specifications are subject to

change without notice.

If you have any questions regarding the products of STARDOM, or you would like to know the latest

product information, user manual update, or firmware update, please contact your local supplier or visit

www.stardom.com.tw for further information.

1. Package Contents and Product Views

2. Operating Information

3. Hardware Requirements and Precautions

4. Hardware Installation

5. How to Switch the RAID Mode

6. Hard Drive Replacement Instructions

7. Data Rebuild

8. System Temperature Overheat and Fan Failure Management

9. Additional Display Messages of System and Operation Procedures

10. LED Visual Status Indicator Definitions

11. Frequently Asked Questions

Open the package and you should find the following:

Please make sure that the contents listed above are not damaged or missing. If you should find damages

or missing contents, please contact your supplier immediately.

SR2-SB3＋

SR2-SB3＋ｘ1 ( with removable drive tray enclosed x 2 )

e-SATA Cable ｘ1

USB 3.0 Cable ｘ1

AC Power Cable ｘ1

Accessories Kit

CD x 1

Quick Installation Guide x 1

3

1. Package Contents and Product Views

Table of Contents

Introduction

SOHORAID SR2 Series User Manual

Front View

1. LCD display panel

2. Scroll buttons

3. ESC button

4. Power/Alarm indicator

5. Mute button

6. ENT button

7. Removable tray handle

8. Key access opening

9. Hard drive status indicator

10. Power socket

11. Power switch

12. Cooling fan

13. USB 3.0 interface connection

14. eSATA interface connection

15. Anti-theft cord slot

Storage Mode Definitions

Safe mode (RAID 1) : Mirrored storage capacity allowing data protection.

Speed mode (RAID 0) : Striped into a single large volume allowing higher speed transfers but without

data protection.

Operating Temperature : 50 ~ 95 ℃(10 ~ 35 ℉)

Storage Temperature : -4 ~ 116℃(-20~ 47℉)

Line Voltage : 100 ~ 240V AC

1. Both hard drives must be installed into the system for the device to work properly.

2. Only one interface connection may be used at once per computer system.

3. For the best performance of the system, it’s strongly recommended that you install hard

drives of the same model and if need be, replace faulty hard drives also with the same model. If the same

model of HDD is unobtainable, please replace with a model that is at least 20GB larger in capacity.

4. All data on replacement hard drive will be erased once inserted into the system.

5. The actual usable storage capacity may differ from the stated capacity once the drives in the system

have been formatted.

4

3. Hardware Requirements and Precautions

2. Operating Information

ESC

ENT

ALARM

MUTE

USB 3.0

e-SATA

Please ensure each plug is properly

connected before turing on power.

234

789

10 11

14 15

SOHORAID SR2 Series User Manual

6. Always safely dismount the volume from the Operating System before removing SOHORAID SR2 from

host computer.

7. Do not remove the hard drive(s) while the system is powered on or switch the position of the drives.

Always remember to power off the unit prior to removing the hard drives (unless hot-swapping for the

purpose of a rebuild in a RAID 1 configuration).

8. In RAID 1 mode, only 1 hard disk failure is permitted. Please seek help from data recovery services

should there be further data-loss due to failures in a RAID 0 mode.

9. It is highly recommended for users to back up important data. Stardom will not be responsible for any

lost of data caused during the use of the unit or the recovery of the data lost.

10. The default setting of SOHORAID SR2 is RAID 1. To set it in a data protection mode, please set it to

RAID 1. Please set SR2 to RAID 0 mode when speed and large storage capacity is required.

11. Users can set the RAID level and the basic functions of SOHORAID SR2 using the buttons on the

right side of LCD screen in front of the product.

Please follow the instructions below to complete the hardware installation:

Step 1 Open the package and take out the product making sure that all contents are not damaged or

missing. Should you find any damage or missing contents, please contact your supplier

immediately.

Step 2 Place the system on a stable surface. Ensure that it is installed in a well ventilated area with

acceptable airflow for the vent and keep product away from moisture.

Step 3 Use the provided key in the accessory kit to eject the removable tray, pull tray handle to remove

from SR2.

Step 4 Install your hard drives onto the removable drive tray and secure it with the screws included in the

accessory kit. Once completed, insert the hard drive tray into the system.

5

ESC

ENT

ALARM

MUTE

ESC

ENT

ALARM

MUTE

4. Hardware Installation

SOHORAID SR2 Series User Manual

Step 5 Use the provided cables to connect your computer to the preferred interface connection.

Step 6 Power on the unit and wait for the system to initialize. When the LCD display panel indicates

“OK”,the system has completed initialization and is ready for hard drive formatting.

System initializing Normal operational state

When the SR2 has completed initializing, your computer’s operating system should recognize the device

automatically. Please follow the formatting instructions given by the operating system to format the drives.

Once the formatting has been completed, the system is ready for use.

The default setting of SOHORAID SR2 is RAID 1. To change the setting, please follow the steps below:

Step 1 After turning on the power, press “▲” when the screen below is displayed on the LCD.

Step 2 If you are sure to switch the RAID mode, press “ENT” to accept. If not, press “ESC”.

Step 3 This display indicates that the switch has been done successfully. Please reboot the SOHORAID SR2.

In normal operational state, if the LCD displays “Pri : X” or “Sec : X” and the audio alarm activates, this

would indicate that the hard drive may be malfunctioning.

When this happens, you may choose to disable the audio alarm by pressing the MUTE button located at

the front of the system and continue to operate the system normally.

When finished, you may restart the SR2 to double check and see if the drive is in fact malfunctioning. If

you are certain that the drive is in fact malfunctioning, follow the instructions below to complete the

replacement of the malfunctioning drive.

6

6. Hard Drive Replacement Instructions

Change to RAID-0

Ent = Yes Esc = No

5. How to Switch the RAID Mode

Pri HDD : OK

Sec HDD : OK

SR2-SB3+

RAID-1 vxxxxxx.x

Pri HDD : OK

Sec HDD : OK

SR2-SB3+

RAID-1 vxxxxxx.x

RaidMode Changed

Please Reboot

SR2-SB3+

RAID-0 vxxxxxx.x

SOHORAID SR2 Series User Manual

Primary drive damage Secondary drive lost

Step 1 Shut off the SR2 power. Extract the drive displaying “X” on the LCD display from the corresponding drive position

and replace it with the new replacement drive. Do not switch the positions of the drives.

Step 2 Once the replacement is complete, turn on the power of the SR2. When the system completes initialization, the

LCD display will ask you if you wish to initiate the rebuilding procedure.

During the use of SR2, if you are required to replace a malfunctioning drive refer to chapter 6“Hard Drive Replacement

Instructions”.Once drive replacement is complete and you power on the SR2,the system will perform data reconstruction.

The data rebuild processing time is based on the capacity of the drive. During procedures, we suggest to not use the

system until the procedure(s) is complete as use of the system during procedures may cause delays to the processing

time.Please wait until the procedure(s) has been completed to continue use.

During the data rebuilding process, the LCD panel will display the percentage progression rate of the rebuild. Below are

sample diagrams.

If during the rebuilding process, a drive malfunctions and is unable to continue the rebuilding process, restart the SR2 to

check and see that the drive is in fact malfunctioning. If it is, please refer to chapter 6 “Hard Drive Replacement

Instructions” to replace the malfunctioning drive.

Below are sample diagrams of drive malfunctioning.

7

Primary drive error during rebuild

Secondary drive error during rebuild

Pri HDD : OK

Sec HDD : Fail

Pri HDD : Fail

Sec HDD : OK

7. Data Rebuild

RAID-1 degraded

Pri : X SEC : O

RAID-0 failed

Pri : O SEC : M

Pri : HDD Insert

Sec HDD : OK

Rebuilding

Sec→Pri 32%

Pri HDD : OK

Sec HDD : Insert

Rebuilding

Pri→Sec 32%

SOHORAID SR2 Series User Manual

If the LCD panel displays “T” on the bottom right hand corner meaning the system temperature has exceeded its

allowance of 50℃or “F” at the top right hand corner meaning the system fan has malfunctioned and the audio alarm

alerts, you may first press the MUTE button to disable the audio alarm. At the allowed operational state, re-start the

system to double check and see if the problem is still present. If the problem persists, please turn off the system and

contact your supplier or the STARDOM tech support for further assistance.

The SR2 frontal LCD panel is able to display additional messages such as firmware version, system temperature and fan

status by pressing the ▼or ▲buttons to make your selection.

Continuously pressing the selection buttons allows you to scroll through the menu. If not pressed within 3 seconds, the

display will revert back to its normal operational state.

Power/Alarm indicator :

When the Power/Alarm indicator lights green, this means the system power is on.

When the Power Alarm indicator lights amber, this means the system temperature has

exceeded its limitation or the system fan has malfunctioned.

Hard drive status indicator :

When the hard drive status indicator is off, this means the drives are idling.

When the hard drive status indicator lights or blinks blue, this means the drives are being accessed for operation.

Q1. Which drive format should I choose to format the hard drives in the SR2 ?

A : It depends on the computer system you most often use. See the below suggestions:

1. Use NTFS for Windows 2000/XP/Vista/Windows 7 system.

2. Use HFS+ (Mac OS Extended) format for a Mac OS X system.

3. Choose FAT32 format if you’ll use the SR2 in both Windows and Mac environments(the maximum size of one single

file may not exceed 4 GB).!

8

11. Frequently Asked Questions

10. LED Visual Status Indicator Definitions

System fan RPM message

System temperature message

System Temp.

50 ℃

9. Additional Display Messages of System and Operation Procedures

System fan malfunctioning

System temperature exceeded limitation

Pri HDD : OK F

Sec HDD : OK

Pri HDD : OK

Sec HDD : OK T

8. System Temperature Overheat and Fan Failure Management

Note :

The next time you turn on the power of the unit, the system will automatically continue to

process the remains. Please do not switch position of the drive at any time.

System FAN

xxxx RPM

SOHORAID SR2 Series User Manual

Vielen Dank für den Kauf eines STARDOM Produkts.

Dieses Bedienungsanleitung beschreibt das STARDOM SOHORAID SR2 Produkt. Bevor Sie dieses

Produkt benutzen, lesen Sie diese Anleitung bitte sorgfältig durch.

Obwohl alle Informationen in dieser Anleitung vor der Veröffentlichung sorgfältig überprüft wurden,

beziehen sich die tatsächlichen Produktspezifikationen auf die Zeit der Auslieferung durch STARDOM.

Aktualisierungen der Produktspezifikationen können auf der Webseite www.

stardom.com.tw gefunden werden. Änderungen der Produkte ohne vorherige Nachricht vorbehalten.

Wenn Sie Fragen zu den Produkten von STARDOM haben, oder mehr über die aktuellsten

Produktinformationen, Aktualisierungen der Bedienungsanleitung oder Firmwareupdates erfahren

möchten, kontaktieren Sie bitte Ihren Händler vor Ort oder besuchen Sie www.stardom.com.tw für weitere

Informationen.

1. Packungsinhalt und Produktansichten

2. Betriebsinformationen

3. Festplattenanforderungen und Vorsichtsmaßnahmen

4. Hardwareinstallation

5. Wechsel des RAID Modus

6. Anweisungen für den Festplattenaustausch

7. Datenwiederherstellung

8. Verhalten bei Systemüberhitzung und Lüfterausfall

9. Zusätzliche Anzeigen von System- und Bedienungsvorgängen

10. Beschreibung der visuellen LED Statusanzeige

11. Oft gestellte Fragen

Öffnen Sie das Paket und Sie sollten die folgenden Dinge vorfinden:

Bitte stellen Sie sicher, dass die oben aufgelisteten Inhalte nicht beschädigt sind oder fehlen. Falls

Schäden oder fehlende Inhalte festgestellt werden, kontaktieren Sie bitte umgehend Ihren Händler.

SR2-SB3＋

SR2-SB3＋ｘ1 ( mit integriertem Wechselrahmen x 2 )

eSATA Kabel x 1

USB 3.0 Kabel x 1

Stromkabel x 1

Zubehörset

CD x 1

Kurzinstallationsanleitung

9

1. Packungsinhalt und Produktansichten

Inhaltsverzeichnis

Über diese Anleitung

SOHORAID SR2 Series User Manual

Front View

1. LCD Anzeige

2. Navigationstasten

3. ESC Taste

4. Netz/Alarmanzeige

5. Stummtaste

6. ENT Taste

7. Wechselrahmenklappe

8. Schlüsselzugangsöffnung

9. Festplatten-Statusanzeige

10. Netzbuchse

11. Netzschalter

12. Kühllüfter

13. USB 3.0 Anschluss

14. eSATA Anschluss

15. Steckplatz für Kensingtonschloss

Speichermodus Beschreibung

Sicherer Modus (Raid 1): für individuelle Speicherkapazität und Datenschutz.

Geschwindigkeitsmodus (RAID 0) : Großer Laufwerksspeicher mit hohem Durchsatz, aber ohne

Datenschutz.

Betriebstemperatur : 50 ~ 95°C (10~ 35°F)

Lagertemperatur : -4 ~ 116°C (-20 ~ 47°F)

Spannung : 100 ~ 240V AC

1. Damit das Gerät richtig funktioniert, müssen beide Festplatten in das System integriert werden.

2. Pro Computersystem kann immer nur ein Anschluss genutzt werden.

3. Zur Sicherstellung der bestmöglichen Leistung wird dringend empfohlen, Festplatten derselben Marke

zu verwenden. Falls Sie ein defektes Laufwerk austauschen müssen, wird ein mit dem nicht defekten

Laufwerk identisches Laufwerk empfohlen. Falls kein identisches Laufwerk verfügbar ist, stellen Sie bitte

sicher, dass das Ersatzlaufwerk mindestens 20GB größer ist.

4. Installieren Sie kein(e) Laufwerk(e), auf dem/denen bereits Daten gespeichert wurden, da alle Daten

bei der Formatierung des Laufwerks gelöscht werden.

5. Die tatsächliche Speicherkapazität kann von der auf den Festplatten angegeben Kapazität abweichen,

nachdem sie im System formatiert wurden.

10

3. Festplattenanforderungen und Vorsichtsmaßnahmen

2. Betriebsinformationen

ESC

ENT

ALARM

MUTE

USB 3.0

e-SATA

Please ensure each plug is properly

connected before turing on power.

234

789

10 11

14 15

Inhaltsverzeichnis

Sprachen:

Andere Stardom Lagerung Handbücher

Stardom

Stardom SOHORAID SR4-B31A Bedienungsanleitung

Stardom

Stardom MR2-WBS2 Bedienungsanleitung

Stardom

Stardom SafeTANK GT5640-B31 Bedienungsanleitung

Stardom

Stardom SOHORAID MR2-B31 Bedienungsanleitung

Stardom

Stardom iTANK MT1-B31BP Bedienungsanleitung

Stardom

Stardom SOHORAID DR2-TB2 Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-SB3 Bedienungsanleitung

Stardom

Stardom itank i310 Bedienungsanleitung

Stardom

Stardom SOHORAID SR3MSB-B31 Bedienungsanleitung

Stardom

Stardom SOHORAID DR8M-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID ST2-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID DR2-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID SR8-TB3 Bedienungsanleitung

Stardom

Stardom sohoraid ST2-B31 Bedienungsanleitung

Stardom

Stardom SOHORAID SR4-TB2 Bedienungsanleitung

Stardom

Stardom SA2TB2 Bedienungsanleitung

Stardom

Stardom SR2611 Series Bedienungsanleitung

Stardom

Stardom iTANK MT1-B31BP Bedienungsanleitung

Stardom

Stardom SR4-WBS3 Bedienungsanleitung

Stardom

Stardom SOHOTANK MS2-TB3 Bedienungsanleitung

Stardom

Stardom SOHORAID ST2-B31+ Bedienungsanleitung

Stardom

Stardom sohoraid ST2-B31 Bedienungsanleitung

Stardom

Stardom ZR3MSB-B31 Bedienungsanleitung

Stardom

Stardom SOHORAID ST4-TL3+ Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung