StarTech.com 8STSATDOCK5U3ER Bedienungsanleitung

Manual Revision: 08/31/2016

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

SATDOCK5U3ER

USB 3.0\eSATA 1:5 SATA HDD Duplicator Dock

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Product Diagram ....................................................................................1

Front View .................................................................................................................................................... 1

Rear View...................................................................................................................................................... 1

Introduction............................................................................................2

Packaging Contents ................................................................................................................................. 2

System Requirements.............................................................................................................................. 2

Hardware Setup......................................................................................3

Basic Operation ......................................................................................3

Advanced Operation..............................................................................4

User Menu Table of Contents................................................................................................................ 5

LED Indicators.........................................................................................11

Technical Support ..................................................................................12

Warranty Information............................................................................12

Instruction Manual

Product Diagram

Front View

Rear View

1. Source 2.5/3.5in HDD/SSD Top Loading Slot Bay

2. Destination 2.5/3.5in HDD/SSD Top Loading Slot Bays

3. LCD Display

4. Menu Operation buttons

5. Power button

6. Drive Power Buttons/LEDs

1. Fan Speed Controls

2. eSATA Port

3. USB 3.0 Port

4. Power Adapter Port

Instruction Manual

Introduction

Packaging Contents

• 1 x USB 3.0/eSATA 1:5 SATA HDD duplicator dock

• 1 x USB 3.0 cable

• 1 x eSATA cable

• 4 x rubber feet (installed)

• 1 x universal power adapter (NA/JP, EU, UK, ANZ))

• 1 x instruction manual

System Requirements

For Duplication (Duplicator Mode)

• 1x Source 2.5/3.5in Solid State Drive (SSD) or Hard Drive (HDD)

• Up to 5x Destination 2.5/3.5in Solid State Drive(s) (SSD) or Hard Drive(s) (HDD)

For Erasing

• Up to 5x 2.5/3.5in Solid State Drive(s) (SSD) or Hard Drive(s) (HDD)

For Docking Station (PC Mode)

• Computer system with:

• Available USB Port

• Available eSATA Port (Requires Port Multiplier support)

Instruction Manual

Hardware Setup

WARNING! Hard drives and storage enclosures require careful handling, especially

when being transported. If you are not careful with your hard disk, lost data may

result. Always handle your hard drive and storage device with caution. Be sure that

you are properly grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up by touching a large

grounded metal surface (such as the computer case) for several seconds.

1. Using the included Power Adapter, connect the Power Adapter Port on the

SATDOCK5U3ER to an available AC power outlet.

2. Insert your SSDs/HDDs into the top loading drive bay(s). Ensure that the SATA

connectors on the SSDs/HDDs are facing the same corner of the drive bay that has

the 2.5in cut-out in the door. The label on the SSDs/HDDs should face the front of

the SATA docking station.

Notes:

• The drive containing the data to copy (Source HDD) needs to be inserted into the

Source bay.

• The drives designated to have data duplicated to them, or drives designated for

erasing must be placed in the Destination bays.

3. Press the power button to turn on the SDOCK5U3ER, followed by the Drive Power

Buttons for each of the bays that contain an HDD/SSD. The Power LEDs around the

power buttons will light up, as the LCD display becomes active.

4. (Optional for Docking Station) Depending on your choice of interface connection,

connect the included eSATA or USB 3.0 cable from the respective port on the

SDOCK5U3ER to an available port on your computer system.

Basic Operation

For Drive Duplication

1. Using the up and down arrow keys, locate “1. Copy” from the On Screen LCD display

and press ENT.

2. The duplicator will analyze the source drive and ensure the target is ready, by

verifying size. Once the drives have been analyzed you will receive an indicator

stating the duplicator is ready. Press ENT, and the system will begin duplication

automatically.

Instruction Manual

For Drive Erasing:

WARNING! Any Data remaining on drives connected to the destination port will be

deleted. Please back up all data before performing any Erase function.

1. Using the up and down arrow keys, locate “5. Erase HD” from the On Screen LCD

display and press ENT.

2. You will receive an indicator stating the Eraser is ready and warning that any data

remaining on the drives will be deleted. Press ENT, to conrm you would like to

erase the drive data, press the“ENT” button.

For Docking Station:

1. Using the up and down arrow keys, locate “9. Link Host” from the On Screen LCD

display and press ENT.

2. You can choose whether to dock with the HDD/SSDs attached to the source (Source

To Host), or destination bays (Target To Host), as well as whether you’ve chosen to

dock with USB or eSATA – using the Link Host sub menu. Using the up and down

arrow keys select your desired choice.

a) 9.2. USB Source To Host

b) 9.3 USB Target To Host

c) 9.4 ESATA Source To Host

d) 9.5 ESATA Target To Host

3. Your choice of drive(s) will now be accessible within your operating system as if they

were internally connected to your computer.

Note: You cannot dock all six drives simultaneously.“Target to Host” will dock the

ve destination drives, while“Source To Host”will dock the single source drive.

Advanced Operation

Using the On Screen Display and the menu operation buttons you can navigate

through the device menu for advanced operation. Use the up and down arrow keys

to move between menu items. Use the ENT and ESC to select or move back between

menu items.

Instruction Manual

User Menu Table of Contents

1. Copy HD

2. Compare HD

3. Copy & Compare

4. PreScan HD

5. Erase HD

6.Source HD Size

7. Setup 7.1 Copy Size

7.2 Copy Disk

7.3 Startup Menu

7.4 Button Sound

7.5 Device Info

7.6 System Info

7.7 Erase Mode 7.7.1 - Quick Erase

7.7.2 - 1 Pass Overwrite

7.7.3 - 3 Pass Overwrite

7.7.4 - 7 Pass Overwrite

7.8 Select Part.

8. Adv Setup 8.1 Error Skip

8.2 Load Defaults

8.3 Upgrade Firmware

9. Link Host

Instruction Manual

1. Copy

The copy function copies data from the source HDD to the destination HDDs.

Notes:

• If an error occurs during the copy process, it will be reported on the OSD and the

oending drive will have a Purple LED.

• If an error occurs before the copy process begins such as a missing drive or

unresponsive drive then the oending drive will have a red LED. However, the OSD

will not report an error because the drive was not part of the copy process.

• If failure occurs during the copying process, and more than one drive is connected,

you will be alerted of the failure at the end of the copying process. To determine the

specic reason for failure, please do a duplication with only the failed drive, and the

OSD will report the failure error instantly.

2. Compare

The Compare function can be used after a duplication is nished to conrm the data

on the target HDD is identical to the source HDD.

3. Copy & Compare

The Copy & Compare function executes a duplication and then automatically executes

the compare function immediately afterwards.

4. Pre Scan HDD

The Pre Scan HDD function, checks your source drive for issues such as hard drive

errors. An excellent tool for hard drive diagnostics, if you’re experiencing diculty

copying or erasing your drive.

5. Erase

WARNING! Any Data remaining data on any drive connected to a designated erase

port will be over written. Please back up all data before performing any Erase function.

The Erase function, erases all destination drives connected to the docking station.

Notes:

• If an error occurs during the erase process, it will be reported on the OSD and the

oending drive will have a Purple LED.

• If an error occurs before the erase process begins, such as a missing drive or

Instruction Manual

unresponsive drive then the oending drive will have a red LED. However, the OSD

will not report an error because the drive was not part of the copy process.

• If failure occurs during the erasing process, and more than one drive is connected,

you will be alerted of the failure at the end of the erasing process. To determine the

specic reason for failure, please do a duplication with only the failed drive, and the

OSD will report the failure error instantly.

• There are multiple erase modes, you can dene which Erase Mode is executed in the

Erase Mode section of the setup menu [7.7].

6. Source HDD Size

The Source HDD Size function, calculates the exact size of the source drive, this can

be important as the exact total size of hard drives can vary from model to model even

when the reported drive size is the same. If the destination drive is small than the

source drive, the copy function cannot be completed.

7. Setup

The Setup function, enables you to review and adjust system congurations. See

each menu subset below, outlining the details and functionality of each conguration

option.

7.1 Copy Size

The copy size function enables you to limit the amount of data that is cloned from

the source drive, dene the total in Gigabytes (GB).

7.2 Copy Disk

The copy Disk function, enables you to select the number of Target Disks the source

disk will copy to when completing a copy function. The corresponding numbers

represent the ports.

7.3 Startup Menu

* Set Default menu start up position

7.4 Button Sound

The button sound function, enables you to dene whether an auditable sound will

be heard while pressing the buttons on the device. You can select Disable or Enable.

This option is disabled by default.

7.5 Device Info

The Device Info function, enables you to review the installed drive’s details

including: role, size, model number, and drive ID.

7.6 System Info

The System Info function, enables you to review the revision number of the

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere StarTech.com Dockingstation Handbücher

StarTech.com

StarTech.com USB3SMDOCKV Bedienungsanleitung

StarTech.com

StarTech.com DKT31CHDVCM Bedienungsanleitung

StarTech.com

StarTech.com SATADOCKU2E Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK22U3S Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK4U3 Bedienungsanleitung

StarTech.com

StarTech.com SATDOCKU3SEF Bedienungsanleitung

StarTech.com

StarTech.com SDOCK4U33 Bedienungsanleitung

StarTech.com

StarTech.com USBA2DPGB Bedienungsanleitung

StarTech.com

StarTech.com SDOCK2U313R Bedienungsanleitung

StarTech.com

StarTech.com SATDOCKCRH Bedienungsanleitung

StarTech.com

StarTech.com SDOCKU33BV Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK22RE Bedienungsanleitung

StarTech.com

StarTech.com 8STSDOCK1EU3P2 Bedienungsanleitung

StarTech.com

StarTech.com SDOCKU313E Bedienungsanleitung

StarTech.com

StarTech.com SATADOCK22UE Bedienungsanleitung

StarTech.com

StarTech.com DK31C2DHSPD Bedienungsanleitung

StarTech.com

StarTech.com SATHDDDOCKU2 Bedienungsanleitung

StarTech.com

StarTech.com 8STSDOCK2U33 Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK4U2E Bedienungsanleitung

StarTech.com

StarTech.com SDOCK4U33E Bedienungsanleitung

StarTech.com

StarTech.com TB3DK2DPW Bedienungsanleitung

StarTech.com

StarTech.com SATADOCKU2 Bedienungsanleitung

StarTech.com

StarTech.com DK30CH2DEPUE Bedienungsanleitung

StarTech.com

StarTech.com SDOCK4U33E Bedienungsanleitung

Beliebte Dockingstation Handbücher anderer Marken

Sony

Sony Dream Machine XDR-DS12iP Bedienungsanleitung

Acer

Acer USB Type-C Dock II Bedienungsanleitung

ATEN

ATEN UC-2000 Bedienungsanleitung

Xcellon

Xcellon HDD-202 Bedienungsanleitung

Dok

Dok CR09 Bedienungsanleitung

Philips

Philips BTM630/12 Bedienungsanleitung

IOGear

IOGear Travel Pro GUD3C09 Bedienungsanleitung

RKI

RKI SDM-E2 Bedienungsanleitung

iHome

iHome iP15 Bedienungsanleitung

VITURE ONE

VITURE ONE MOBILE DOCK Bedienungsanleitung

Lindy

Lindy 42984 Bedienungsanleitung

CipherLab

CipherLab 8001 Bedienungsanleitung

Pyle

Pyle PIPDSP2 Bedienungsanleitung

Avol

Avol AS2350 Bedienungsanleitung

Datalogic

Datalogic JoyaTouch Bedienungsanleitung

Philips

Philips DC190/79 Bedienungsanleitung

Targus

Targus DOCK315EUZ Bedienungsanleitung

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Bedienungsanleitung