StarVedia IC602 Bedienungsanleitung

Outdoor

Day & Night IP Camera

IC602

User Manual

StarVedia Technology Inc.

http://www.starvedia.com

Revision: 020205

Date: 2009/04/21

For firmware version v020205

StarVedia Outdoor, Day&night IP Camera

Table of Contents

1. INTRODUCTION..........................................................................................................................6

2. HARDWARE DESCRIPTION AND QUICK INSTALLATION/USAGE ................................8

2.1. MAJOR HARDWARE COMPONENTS.......................................................................................8

2.2. QUICK INSTALLATION AND USAGE ........................................................................................9

3. WEB CONFIGURATIONS........................................................................................................13

3.1. INFORMATION ......................................................................................................................14

3.2. VIDEO DISPLAY ...................................................................................................................15

3.3. NETWORK............................................................................................................................16

3.4. ADVANCED NETWORK.........................................................................................................18

3.5. VIDEO SETTINGS.................................................................................................................19

3.6. NIGHT MODE CONTROL .......................................................................................................22

3.7. EMAIL/FTPALARM.............................................................................................................23

3.8. DI/DO SETTINGS.................................................................................................................25

3.9. NAS SETTINGS....................................................................................................................26

3.10. SCHEDULING .......................................................................................................................28

3.11. DATE/TIME...........................................................................................................................30

3.12. ADMIN..................................................................................................................................31

3.13. UPGRADE ............................................................................................................................32

3.14. REBOOT...............................................................................................................................34

3.15. SAFE MODE.........................................................................................................................35

3.16. SET TO FACTORY DEFAULT..................................................................................................36

4. FEATURES AND SPECIFICATIONS......................................................................................37

4.1. FEATURES ...........................................................................................................................37

4.2. SPECIFICATIONS..................................................................................................................38

5. PACKAGE CONTENTS............................................................................................................40

FIGURE 5-7: INSTALLATION CD APPENDIX A. LIST OF TESTED

NAT/ROUTER DEVICES....................................................................................................................40

APPENDIX A. LIST OF TESTED NAT/ROUTER DEVICES........................................................41

APPENDIX B. MAXIMUM ALLOWED VIDEO USERS.................................................................42

APPENDIX C. PERFORMANCE INFORMATION .........................................................................43

APPENDIX D. TROUBLE SHOOTING............................................................................................44

APPENDIX E. 3GPP/ISMA OPERATION........................................................................................45

StarVedia Outdoor, Day&night IP Camera

APPENDIX F. THIRD PARTY AND EMBEDDED WEB PAGE INTEGRATION........................46

StarVedia Outdoor, Day&night IP Camera

List of Figures and Tables

Figure 2-1: Major components of the IP camera

Figure 2-2: IP CAM connection diagram.

Figure 2-3: The installation CD disk

Figure 2-4: The ID/Password card

Figure 2-5: Running window of CamView program

Figure 2-6: Pop-up play-video password window

Figure 3-1: Open the web configuration page from CamView software

Figure 3-2: IP CAM Web configuration login page

Figure 3-3: IP CAM Information page

Figure 3-4:Video display page

Figure 3-5: Network settings page for DHCP function

Figure 3-6: Network settings page for fixed IP address

Figure 3-7: Advanced network settings page

Figure 3-8: Video settings page

Figure 3-9: 3GPP/RTSP enabled page

Figure 3-10: Night mode control page

Figure 3-11: Email/FTP Alarm page

Figure 3-12: DI/DO Settings page

Figure 3-13: NAS Storage settings page

Figure 3-14: Schedule Management page

Figure 3-15: System date/time settings page

Figure 3-16: Admin settings page

Figure 3-17: Firmware upgrade settings page

Figure 3-18: Firmware upgrade status page

Figure 3-19: System reboot settings page

Figure 3-20: System reboot under-going page

Figure 3-21: Safe mode information page

Figure 3-22: Press the reset button to set to the factory default

Figure 5-1: IP Cam body

Figure 5-2: Power Adaptor

Figure 5-3: Bracket

Figure 5-4: Ethernet cable

Figure 5-5: Quick installation guide

Figure 5-6: ID/Password Card

Figure 5-7: Installation CD

Table A-1: List of tested Wireless AP/router devices

StarVedia Outdoor, Day&night IP Camera

Table A-2: List of tested Wired NAT/router devices

StarVedia Outdoor, Day&night IP Camera

1. Introduction

The IP Network Camera is designed with the “user-friendly” idea deep in mind.

The user can install the IP Camera easily on his/her home network and then access

the IP Camera anywhere in the world through the accompanied video management

software - CamView without setting some complicated DNS name or changing the

router’s settings. It’s just a plug & play action.

With 3GPP/ISMA support, users can see the video of the IP camera on any 3G

mobile phone anywhere, anytime. The big difference is that there is software for

downloading to the mobile phone so that the fixed IP address is not needed for the IP

camera. The video settings including frame rate, resolution and bandwidth could be

different for PC monitoring and mobile viewing.

For outdoor surveillance and remote monitoring, the IP Camera provides the

best image quality in its class, and excellent performance. It also provides the best

bandwidth efficiency, offers 640x480 resolution, 30 fps frame rate, real MPEG4 image

compression ability.

With the very low light sensitive sensor and IR led inside the IP66-rated water

proof housing, the IP Camera can work day and night and satisfy all security and

indoor/outdoor surveillance needs. With the motor controlled IR-cut filter, the day-time

video quality is not affected by the infrared light in the sun light. The IR-cut filter is

automatically turned on during dark light.

The NAS storage function can easily turn any NAS device to a NVR device. The

schedule function provides full scheduling of email/ftp sending, motion detection and

NAS recording event. With the built-in Web server, the IP Cameras can also be

managed from a standard web browser on a Windows computer or a Macintosh.

The IP Camera provides motion detection function. Users can easily setup this

function and receive the notification with the snapshot images through email and/or ftp

when some motion events are detected.

The IP camera is ideal for securing small businesses, home offices and

residences over a local area network and/or the Internet.

The differences

It’s very easy to see the video of the IP Cam, you only need to key in the

ID/Password of the IP CAM any where in the world, you do not need to remember the

IP address or domain name or DDNS name or port number. And you do not need to

modify the settings(like port mapping, fixed IP, DDNS, virtual server) of the NAT/router

StarVedia Outdoor, Day&night IP Camera

devices, it’s just a plug & play usage.

So, the differences are the followings:

♦Public IP address needed ? No

♦Dynamic DNS needed ? No

♦Port mapping in router? No

♦Virtual server in router ? No

♦UPnP support in router ? No

♦What’s needed ? ID and Password

StarVedia Outdoor, Day&night IP Camera

2. Hardware description and quick installation/usage

The IP CAM is designed to be very easy to install and use. First, let’s see the

major components of the IP CAM products.

2.1. Major hardware components.

The major components of the IP CAM products are listed below :

1. Lens – the focus of the lens is fixed, you do not need to spend time to adjust the

focus, the effective focus range is from 30cm to infinity.

2. IR LEDs – there are totally 36 IR LEDs that can provide approximately 30m

distance night vision.

3. Light detector – this light detector can detect when the light is becoming dark and

turn on the IR LEDs automatically.

4. Power jack – this is the place to plug in the power adaptor. The power needed for

this IP CAM is 12V/1.0A, please make sure you are using the correct power

adaptor.

5. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable.

6. Reset button – this is the button to reset the IP CAM to default factory settings.

You need to press the reset button for more than 4 seconds to enable the reset

function. Usually when you forgot the administrator account, you will probably

need to do this reset action to reset to the default factory settings. Please refer to

section 3.16 for more details.

7. Digital input terminal block – this is for alarm detection, an open circuit is off, a

close circuit is on.

8. Status indication LED (red) – this LED is to indicate the Internet connection status.

When the Internet connection is connected, the LED will be constant red light. If

there is any Internet connection problem, the LED will be blinking red light.

9. Ethernet indication LED (blue) – this LED is to indicate if the Ethernet link is ok

and packet traffic is sending/receiving. When the Ethernet cable is connected, the

LED is constant blue light. When there is packet sending/receiving, the LED is

blinking blue light.

StarVedia Outdoor, Day&night IP Camera

Figure 2-1: Major components of the IP camera

2.2. Quick installation and usage

There are only three things that you need to do to see the video from the IP CAM.

1. Connect the IP CAM to the home/office network.

2. Install the CamView software on the notebook/PC.

3. Key in the ID/password of the IP CAM(from the ID/Password card) on the

CamView, and then you can see the video.

First, Connect the IP CAM to the home/office network

Please connect the IP CAM accessaries to the IP CAM body correctly, including

the bracket, power adapter and Ethernet cable, as shown in Figure 2-2.And connect

the other end of the Ethernet cable to the home network or office network. Usually,

this Ethernet cable is plugged into a home NAT/router device or an Ethernet switch if

in the office, as shown in Figure 2-2. Since the default settings of the IP CAM use

DHCP function and very often there is a DHCP server on most of the Home/office

network, the IP CAM should be connected to the Internet immediately.

StarVedia Outdoor, Day&night IP Camera

Figure 2-2: IP CAM connection diagram.

Second, Install the CamView software on the notebook/PC

Please insert the installation CD into the CD-ROM drive in your notebook or

personal computer (must be running Microsoft Windows OS). Execute the program

CamViewInstaller-xxx.exe on the disk. The program will pop-up some windows about

the installation options, please press the “next” button to proceed with the installation.

After the installation is complete, there will be a CamView icon on the desktop of your

computer screen, please execute this icon. The CamView program will run

immediately.

Figure 2-3: The installation CD disk

Third, Use CamView program to see the video

Figure 2-5 is the running window of the CamView program. If the computer and

IP CAM is connected to the same network, the IP CAM ID will be displayed in the

Inhaltsverzeichnis

Andere StarVedia IP-Kamera Handbücher

StarVedia

StarVedia IC717z Bedienungsanleitung

StarVedia

StarVedia IC212 Bedienungsanleitung

StarVedia

StarVedia 802.11 n Bedienungsanleitung

StarVedia

StarVedia 802.11 n Bedienungsanleitung

StarVedia

StarVedia IC737w Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung