Steren BAF-510 Bedienungsanleitung
Before using your new Portable 150W PA System, please
read this instruction manual to prevent any damage. Put it
away in a safe place for future references.
FEATURES
Convenient portable PA package with luggage-style handle
and wheels for easy transport
5-channel 150W RMS powered mixer
Stereo two-way speaker system with 10” woofer and
piezoelectric tweeter horn, speaker cables, two folding
speaker stands
XLR and1/4” mic/line inputs
Stereo source inputs for CD, VCR or DVD or other audio
sources
Bass, treble and reverb controls
DSP
Five-band graphic equalizer
Dynamic microphone
Storage compartment for microphones, cables and
accessories
Stereo RCA auxiliary outputs
WARNING
An equilateral triangle enclosing a lightening
flash / arrowhead symbol is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product’s enclosure which
may be of sufficient magnitude to constitute a
risk of electric shock.
An equilateral triangle enclosing an exclamation
point is intended to alert the user to the
presence of important operating and service
instructions in the literature enclosed with this
unit.
•
•
•
•
•
•
•
•
•
•
•
ENGLISH
ENGLISH-2
Before usin
g
y
our new Portable 150W PA S
y
stem, please
read this instruction manual to prevent an
y
dama
g
e. Put it
a
wa
y
in a safe place for future references
.
IMPORTANT SAFETY INSTRUCTIONS
When using this electronic device, basic precautions should
always be taken, including the following:
Do not use this product near water (e.g. near a bathtub,
washbowl, kitchen sink, swimming pool, etc.).
This product, in combination with headphones or speakers,
may be capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long period of
time at a high volume level or at a level that is
uncomfortable. If you experience any hearing loss or ringing
in the ears, you should consult a doctor.
The product should be positioned so that proper ventilation
is maintained.
The product should be located away from heat sources such
as radiators, heal vents, or other devices (including
amplifiers) that produce heat.
This product should be used only with a cart or stand that will
keep it level and stable and prevent wobbling.
The product should be connected to a power supply only of
the type described in the user’s manual or as marked on the
product. Replace the fuse only with one of the specified type,
size and correct rating.
The power cord should: 1) be undamaged, 2) never share
an outlet or extension cord with other devices so that the
outlet’s or extension cord’s power rating is exceeded, and 3)
never be left plugged into the outlet when not being used for
a long period of time.
Care should be taken so that objects do not fall into, and
liquids are not spilled through, the enclosure’s openings.
This product should be serviced by qualified personnel if:
- The power cord or the plug has been damaged
- Objects have fallen into, or liquid has been spilled onto
the product
•
•
•
•
•
•
•
•
•
ENGLISH
ENGLISH-3
- The product has been exposed to rain
- The product does not appear to operate normally or
exhibits a marked change in performance
- The product has been dropped, or the enclosure
damaged
Do not attempt to service the product beyond what is
described in the user maintenance instructions, All other
servicing should be referred to qualified service personnel.
INSTALLATION
1. Inspection
Your new Portable Sound System was carefully packed at the
factory in packaging designed to protect the units in shipment.
Before installing and using your unit, carefully examine the
packaging and all contents for any signs of physical damage that
may have occurred in transit.
CONTENTS
Mixer
2 speakers
2 stands
1 microphone
Cable for speakers and microphone
Power cord
Instruction manual
2. Setup
After transporting the device to the desired location, lay the unit
down on its flat side. Unclasp the side panel latches by pulling up
on the yellow tab to release and unhook the latch. Carefully lift
off the speakers and then remove the speaker stands and
accessories from inside the unit.
Mixer
Position the mixer in a flat surface. Parts of the unit can become
very warm during use. This is normal during operation. Care
should be taken to ensure that there is enough space behind the
Mixer for cooling. Also, do not place the Portable Sound System
on high temperature devices such as power amplifiers, etc., or
the unit may overheat in operation.
•
•
•
•
•
•
•
•
ENGLISH
ENGLISH-4
Please make sure that the power unit supplied is marked for the
correct voltage in your area. Power requirements for electrical
equipment differ from area to area. It is wise to confirm the
voltage and use the appropriate power supply unit before
connecting it to power sources.
Speakers and Stands
Fully extend the speaker stand tripod legs and tighten the base
thumbscrew. Extend the pole of the stand to the desired height
and insert the safety pin completely through the stand hole
above the pole thumbscrew. Lower the pole so that the pin rests
on the holder and tighten the pole thumbscrew.
Setup the stands on a flat surface where the speakers will be
located and not disturbed. Place the speakers on the stands and
position them as desired.
Facing the speakers towards any of the microphones connected
with the mixer will increase the chance of feedback.
Connect the speaker cables to the input jacks on the lower left
front panel of both the Left and Right speakers.
Connect the other end of each cable to the corresponding Left
and Right speaker outputs on the rear panel of the mixer.
Position the length of the cables so they will not be a safety
hazard to people.
Connect only the supplied speakers to the mixer.
Inputs
Connect all sound sources to the appropriate inputs i.e.,
microphones, keyboards, CD players, karaoke machines. The
supplied microphone is ideal for vocal.
When ready to operate, plug the AC cord into the power source.
Make sure that the unit is turned off before connecting to the AC
power source to avoid possible loud transients which can dam-
age your speakers or your ears. Before turning on, connect up
the speakers and all inputs and outputs desired and turn down
the Master Volume.
ENGLISH
ENGLISH-5
C
onnect onl
y
the supplied speakers to the mixer.
CONTROLS
1.- CHANNEL 1-3 XLR INPUT
The XLR mic inputs are an electronically balanced XLR type
designed to accept mic level signals from any balanced low
impedance microphone.
2.- CHANNEL 4 XLR & 1/4” STEREO/MONO INPUTS
The XLR input is balanced, designed to accept mic level signals.
The Left and Right 1/4” line inputs are unbalanced and are
designed for connecting stereo line level audio signals or only
the Left/Mono jack can be used for connecting mono signals.
The XLR input is defeated when either of the 1/4” inputs are
used.
3.- CHANNEL 5 STEREO RCA INPUTS
The stereo RCA line level inputs can be used for connecting CD
players, Tape Decks, and other audio equipment with line level
outputs.
4.- MONO / STEREO MODE
When the Mono/Stereo button is out (stereo mode) the Left
RCA Aux In is sent to the Left Speaker and Right RCA Aux In is
sent to the Right Speaker. When the button is depressed (Mono
mode), both L and R RCA input signals are mixed and sent to
both speakers.
1234
14
8910 11
12
13
15
5
6
7
ENGLISH
ENGLISH-6
5.- REVERB
This control allows you to set the reverb effect level sent to the
speakers.
6.- TREBLE CONTROL
Turn to the right to boost high frequencies, adding crispness too
percussion from drum machines, cymbals and synths. Turn to
the left to cut these frequencies, reducing sibilance or hiss. The
control has a shelving response giving +/-10dB of boost or cut at
10kHz.
7.- BASS CONTROL
The bass control shelving response gives 10dB of boost or cut
at 100Hz. Add warmth to vocals or extra punch to guitars, drums
and synths by turning to the right. Turn to the left to reduce stage
rumble, hum or to improve a mushy sound.
8.- GAIN
Allows you to set the volume level per channel
9.- DSP EFFECTS DISPLAY
Displays the selected effect out of 16 possible effect presets.
10.- DSP EFFECTS SELECTOR
The UP/DOWN buttons allow fast and easy scrolling in either
direction through the 16 effect presets.
Effects List:
Half 1, Half 2, Room 1, Room 2, Room 3, Plate 1, Plate 2, Plate
3, Chorus, Flange, Delay 1, Delay 2, Chorus/Room, Chorus/
Room 2, Vocal cancel, Rotary speaker.
11.- POWER ON INDICATOR
This LED lights blue when the unit is ON.
12.- 5-BAND GRAPHIC EQ
The 5-band channel graphic equalizer allows you to adjust the
frequency response of the L and R Channel bus signal, providing
a maximum of ±12dB of cut and boost for each frequency band
from the flat position.
ENGLISH
ENGLISH-7
13.- INDICATORS
These LED indicators will light red when there is a high level
audio signal at the indicated frequency. These can be used to
detect an audio feedback frequency and then lower the
appropriate EQ fader to remove the unwanted feedback.
14.- AUX RCA OUTPUTS
The Left and Right RCA outputs provide line level signal
output to a cassette deck, home audio equipment, or a recording
device.
15.- L/MONITOR and R/MAIN MASTER VOLUME
These control the final level of the signal sent to the left and right
speaker outputs and the aux RCA outputs.
16.- FUSE HOLDER & POWER CORD CONNECTOR
The cord connector is used to connect the AC power source to
your power amplifier.
This fuse holder contains an AC primary fuse. When this fuse
blows, replace it with the same type fuse, size and power rating.
If it continuously blows, stop replacing the fuse and refer
servicing to qualified personnel.
17.- AC VOLTAGE SELECT SWITCH
Before plugging in the power cord, check to see that the unit is
set for the proper voltage for your area.
16
17
18 19
ENGLISH
ENGLISH-8
18.- POWER SWITCH
Use this switch to power unit ON or OFF. Before turning on this
unit, verify connection to the proper voltage AC source, check all
connections and turn down the level controls of equipment
connected to the outputs.
19.- SPEAKER 1/4” OUTPUT JACKS
Connect to the left and right speakers.
SPECIFICATIONS
Input: 120/240V ~ 50-60Hz 150W
Frequency response.: 20Hz – 20kHz < 1dB
THD: 20Hz – 20kHz <0,1% THD
SNR: < -114dB
Crossover Frequency: 4kHz
Dimensions: 700 x 590 x 360mm
Weight: 64lbs
Speakers
Woofer: 10”
Impedance: 4ohm
Power: 2 x 75W
Frequency response: 60Hz – 20kHz + 3dB @ 1W
Product design and specifications are subject to change,
without notice.
P
roduct desi
g
n and specifications are sub
j
ect to chan
g
e,
wi
t
h
out not
i
ce
.
ENGLISH
ENGLISH-9
Andere Handbücher für BAF-510
1
Inhaltsverzeichnis
Sprachen:
Andere Steren Stereoanlage Handbücher
Steren
Steren BAF-515 Bedienungsanleitung
Steren
Steren BOC-3100 Bedienungsanleitung
Steren
Steren BOC-2100 Bedienungsanleitung
Steren
Steren BOC-3200 Bedienungsanleitung
Steren
Steren BAF-520 Bedienungsanleitung
Steren
Steren BOC-2120 Bedienungsanleitung
Steren
Steren BOC-1190 Bedienungsanleitung
Steren
Steren BOC-1180 Bedienungsanleitung
Steren
Steren BAF-0101 Bedienungsanleitung
Steren
Steren BOC-1050 Bedienungsanleitung
