Stern Pinball PRIMUS Bedienungsanleitung

PRIMUS

SERVICE AND OPERATION MANUAL

Games congured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe UK, Australia).

Stern Pinball machines are assembled in Elk Grove Village, Illinois, USA; each pinball machine has unique characteristics that make it a one-of-a-kind American-made

product. Each machine will have variations in appearance resulting from differences in the machine’s particular wood parts, individual silk screened art and mechanical

assemblies. Stern Pinball has inspected each game element to ensure it meets our quality standards.

WARNING

IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to certain visual images, in-

cluding ashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that can cause “photosensitive epileptic seizures”

due to certain visual images, ashing lights or patterns. Symptoms can include lightheadedness, altered vision, eye or face twitching, jerking or shaking of arms or legs,

disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.

IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.

1-800-KICKERS - [email protected]

www.sternpinball.com - facebook.com/sternpinball

MANUAL #780-50N9-00

PRIMUS #500-55N9-01

PRIMUS MANUAL 500-55N9-01 Copyright of Primus Inc. 2018

TABLE OF CONTENTS

1. Setup and Moving .................................. 3

1.1 First-time Setup Instructions................................ 3

1.2 USA Cable Connections ...................................... 6

1.3 Maintenance ........................................................ 7

1.4 Maintenance Kits ................................................. 7

1.5 Common Maintenance Parts ............................... 7

2. SPIKE System and Node Guide ............ 8

2.1 SPIKE System Overview ...................................... 8

2.2 Node Bus Cabling ................................................ 8

2.3 System Power ...................................................... 8

2.4 SPIKE Node Addresses ....................................... 8

2.5 SPIKE Node Programming................................... 9

2.6 SPIKE System Terminology ................................. 9

2.7 Common SPIKE Node Boards ............................. 9

3. Light, Switch, and Driver Reference... 10

3.1 SPIKE Node Boards ........................................... 10

3.2 Driver Reference ................................................ 11

3.3 Switch Reference ............................................... 12

3.4 Light Reference .................................................. 15

3.5 Motor Reference ................................................ 18

4. Electronic Pinouts and Schematics.... 19

4.1 SPIKE CPU Node 0 ............................................ 19

4.2 Node 1 Cabinet .................................................. 21

4.3 Lower Playeld 48V 8-Driver Pinout Node 8 ...... 22

4.4 Mid Playeld 48V 4-Driver Pinout Node 9 ......... 23

4.5 Mid Playeld Pinout Node 10 ............................ 24

4.6 Backbox 48V 4-Driver Pinout Node 11 .............. 25

4.7 9-Lamp Bottom Extension Pinout Node 11a ..... 26

4.8 10-Lamp Top Extension Pinout Node 11b ......... 26

4.9 Stepper Motor Opto ........................................... 26

4.11 Star Rollover RGB .............................................. 27

4.10 Main Power Supply ............................................ 27

4.12 Stepper Motor Controller ................................... 28

4.13 Mini Diagnostics Display .................................... 28

4.14 Power Distribution Board ................................... 29

4.15 Power Plug Wiring.............................................. 29

5. Parts Reference.................................... 30

5.1 Playeld Rubber Parts ....................................... 30

5.2 Rubber Size Chart .............................................. 30

5.3 Playeld Assemblies, Top .................................. 31

5.4 Playeld Assemblies, Bottom ............................ 32

5.5 Backbox Parts.................................................... 33

5.6 Cabinet Decals ................................................... 33

5.7 Cabinet Parts ..................................................... 34

5.8 Backbox Electronics .......................................... 35

5.9 Backbox LED Bottom ........................................ 35

5.10 Backbox LED Top .............................................. 35

5.11 Score Reel Assembly ......................................... 36

5.12 Credit Reel Assembly ......................................... 36

5.13 Score Reel Assembly ......................................... 36

5.14 Long Range Opto Assembly .............................. 36

5.15 Pop Bumper Assembly ...................................... 37

5.16 Flipper Assy, Left Classic ................................... 38

5.17 Flipper Assy, Right Classic................................. 38

5.18 Beehive Ball Shooter Assembly ......................... 39

5.19 Bullseye Target ................................................... 39

5.20 Trough Coil Assembly ....................................... 39

5.21 Knocker Assy .................................................... 39

5.22 Sling Shot Assemblies ....................................... 40

5.23 Star Rollover ...................................................... 40

5.24 Star Rollover Switch........................................... 40

5.25 Bumper Assembly .............................................. 41

5.26 30-Degree Eject ................................................. 41

6. Specications ....................................... 42

6.1 Warranty ............................................................. 43

6.2 Warnings, Compliance, and Legal Notices ........ 43

SPIKE PINBALL SOFTWARE

UPDATE INSTRUCTIONS

1. Obtain game software update le (lename ends

in “.spk”) from www.sternpinball.com or from

authorized Stern distributor.

2. Place game software update le ( “.spk”) in root

directory of a blank FAT32-formatted USB ash

drive

3. Use backbox power switch to turn off game

4. Plug in USB ash drive to CPU board USB

connector (CN20 or CN21). Refer to www.

sternpinball.com

5. Turn on game

6. The game will automatically begin software

update

7. Select the correct .spk update le from list.

8. Press Enter on the service switches to start

update

9. When the display indicates “Update Complete”,

turn off game

10. Remove USB ash drive from CPU board

11. Turn game on to complete the update and play

pinball!

12. Detailed instructions and troubleshooting tips

are available in the game manual, www.sternpin-

ball.com and authorized Stern distributors.

1. SETUP AND MOVING

557

SETUP AND MOVING

1.1 FIRST-TIME

SETUP INSTRUCTIONS

CAUTION: AT LEAST TWO (2)

PEOPLE ARE REQUIRED TO

MOVE AND MANEUVER THE

GAME. USE PROPER MOVING

EQUIPMENT AND EXTREME

CARE WHILE HANDLING.

STERN PINBALL MACHINES

WEIGH OVER 250LBS BOXED.

TOOLS REQUIRED

• 5/8” Socket Wrench

• 3/8” Nut driver or wrench

• Utility Knife

• Diagonal Cutters

• An Assistant

Your brand new Stern Pinball Machine is

carefully packed for safety and security.

For your safety, exercise caution and use

the correct tools and sufcient help when

setting up your new game.

1. Locate the side labeled “TRUCK

THIS SIDE ONLY”. The bottom of

the game faces this side.

2. Open the top box aps by pulling

hard in an upward motion on each

ap. If the aps are taped, cut the

tape rst, taking care to avoid the

box staples.

3. Remove the four (4) foam pieces

and two (2) narrow box tubes

which contain the four (4) identical

legs with levelers.

4. DO NOT CUT STRAPPING YET.

Keep backbox secured in the

down position.

5. With the utility knife, carefully cut

down the left and right corners of

the box.

6. Let the face fall forward and

remove the entire side by

carefully cutting the bottom.

7. With the game still in its folded

position, use a ⅝” wrench to

loosen and remove the 2 leg

bolts on each side of the front

cabinet. Ensure the leg levelers

are screwed all the way into the

legs.

8. Install front legs using the bolts

removed from the cabinet. Secure

tightly.

9. Have someone help you carefully

set the game down on the front

legs.

10. Set aside the open box.

11. With the ⅝” socket wrench, loosen

and remove the 2 leg bolts on each

side of the rear cabinet, 4 total.

12. Using supports or two people,

prop the rear of the cabinet up.

13. Ensure the rear leg levelers are

screwed all the way into the legs.

14. Install the two rear legs using the 4

bolts previously removed from the

cabinet.

FIRST-TIME SETUP CONTINUED

SETUP AND MOVING

PRIMUS MANUAL 500-55N9-01 Copyright of Primus Inc. 2018

15. Note that the backbox assembly is not attached to the

game cabinet. While supporting the backbox, cut the

strap holding the parts together and set the backbox

aside.

16. Locate the factory keys, either on the shooter rod or

taped to the playeld glass.

17. Using the diagonal cutters, cut the tie-wrap securing

the keys if required. One set of keys is for the front coin

door, the other set of keys is for accessing components

in the backbox.

18. Using the backbox key, locate the backbox lock on top

of the backbox and unlock the lock.

19. Gently remove the backglass frame assembly by lifting

the backglass frame vertically and pulling away from

the backbox.

20. Have someone help you position the backbox, with the

glass removed, over the top of the cabinet and align the

holes.

21. Install the two 3/8-16 x 3.00” bolts in the (2) backbox

holes and tighten with the 3/8” wrench.

22. Open the front coin door.

23. Reach into the game and remove the retaining clip at

the rear of the cash box.

24. Remove the cash box lid by sliding it toward you.

25. Locate and remove the pinball, plumb bob, and

backbox bolts from the cash box.

26. Replace the cash box lid and retaining clip for future

use.

27. Store the backbox keys on the metal hook located in

the coin door.

28. Reach inside the cabinet and lift the two latches located

on either side of the coin door.

29. Remove the front top molding.

30. Remove the playeld glass by sliding it toward you and

carefully place it in a safe location.

Remove all playeld shipping tie downs, shipping

blocks, and packing foam, and follow any game-

specic unpacking instructions included in the playeld,

if present.

CAUTION: PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH

TEMPERED GLASS. TEMPERED GLASS IS SENSITIVE TO EXTREME

TEMPERATURE SHIFTS AND CORNER NICKS, WHICH CAN CAUSE

THE GLASS TO FAIL CATASTROPHICALLY. TAKE CARE TO STORE THE

GLASS ON A SOFT, ROOM-TEMPERATURE SURFACE AND PREVENT

THE CORNERS FROM BEING DAMAGED.

31. Reach inside the cabinet and lift the two latches holding

the playeld in place. If pinballs were already installed

into the lower ball trough, remove them before lifting the

playeld.

32. Grasp the lower arch between the ippers, and rmly

but gently pull directly up to raise the playeld 8 to 12

inches.

33. While holding the playeld up, pull the playeld about

one foot towards you.

34. Pivot the playeld vertically and rest it against the

backbox.

35. Visually inspect all cabinet cables and connector

terminations; ensure no wires or cables are pinched and

that cable harnesses are not pulled tight.

36. Locate the plumb bob in the parts bag in the cash box

37. Slide plumb bob onto the hanger wire. Note: the vertical

position of the plumb bob affects tilt sensitivity - higher

makes the game more sensitive to tilting.

38. Tighten the thumb screw nger-tight.

39. Install the correct number of pinballs. Refer to the decal

on the lock down assembly for the correct number of

pinballs.

29 30

31 31

SETUP AND MOVING

FIRST-TIME SETUP CONTINUED

LOCATING, LEVELING, AND FINAL SETUP

1. Select a location that is indoors, out of direct sunlight,

and climate controlled. Excessive moisture/humidity

can cause long-term damage to your game.

2. Use a pinball to roll down the center of the playeld for

side-to-side leveling, or use an external bubble level,

digital level, or smartphone level app.

3. Plug into a grounded outlet and check for proper

operation through DIAGNOSTICS.

4. Check the coin door: With the door closed, insert coins

to verify proper operation.

5. Play game: Check for satisfactory operation and adjust

game volume (push the Red Buttons inside the Coin

Door).

6. If desired, perform any game diagnostics, game

adjustments, and pricing settings at this time.

PLAYFIELD REMOVAL

The playeld is held in place by two basset clamps located on

each side on the game.

1. Loosen the basset clamps by lifting them away from

cabinet.

2. Lift the playeld and pull toward you.

3. Tilt up and rest the playeld against the backbox if

necessary.

PLAYFIELD INSTALLATION

1. If the playeld has been completely removed, set the

playeld on the wood rails in the base cabinet.

2. Ensure the cables are reconnected correctly.

3. Slide the playeld forward into the base cabinet until it

stops.

4. Latch the basset clamps on each side of the base

cabinet.

SETUP AND MOVING

PRIMUS MANUAL 500-55N9-01 Copyright of Primus Inc. 2018

1.2 USA CABLE CONNECTIONS

FIRST-TIME SETUP CONTINUED

Making cable connection from base game to backbox

Make sure the backbox has been properly attached to the base game

Reach into the base cabinet through the large rectangular hole in the backbox and retrieve the bundle of cables. Pull the

bundle into the back box

Connect the four cables from the base cabinet to the matching cables in the backbox, these are the white connectors.

There is: a 3 pin plug, 4 pin plug, 6 pin plug, and 12 pin plug.

There are two black RJ 45 cables one gets connected to the CPU the other to the 4-coil driver circuit board.

The ribbon cable gets connected to the CPU

The ground strap to the stud as shown

RJ45 cable

Ribbon Cable

Ground Strap

white connector cables

3 pin, 4 pin, 6 pin, 12 pin

RJ45 cable

RJ45 cable goes here

Remove nut with 11/32 driver

Connect ground strap

Replace nut

Loosen 4 nuts-do not remove

Slide CPU up and off

Run ribbon cable behind CPU

as shown

Place CPU back on studs

Tighten nuts

Connect ribbon connector

Note location of stripe

756-6238-00

SETUP AND MOVING

1.3 MAINTENANCE

REGULAR MAINTENANCE - (MONTHLY/500

GAMES)

• Remove the playeld glass

• Enter the software diagnostics menu, start lamp test, then

clean and wax the playeld.

• While cleaning the playeld, identify and repair malfunction-

ing lights, loose parts, cracked plastics and worn rubber

parts.

• While in diagnostics, enter the switch test (Select the "SW"

Icon, then "TEST" Icon).

• Use a pinball to actuate all switches and verify the correct

switch registers with the switch test.

• The game will play a sound to conrm the switch function-

ality.

• Lift the playeld and inspect all assemblies for loose parts,

broken wires or excessive wear. Look at the bottom of the

cabinet for any parts that may have worked loose, then nd

the source.

• Check all coin door mechanisms and bill acceptor (if in-

stalled) for proper operation

• Play a game or two to ensure all coils and features are

working

• Check the playeld to ensure it is level and set to the prop-

er pitch using the bubble level on the right side wood rail.

• Check game audits: Replay % and Ball Time and note

abnormal values which can indicate problems.

• Ensure game volume is set appropriately for the location.

• Clean both sides of the playeld glass and reinstall.

• Check and clean pinballs and replace if excessively worn or

scuffed. Dirty pinballs accelerate game wear.

OVERHAUL MAINTENANCE - (5000 GAMES)

• Verify latest game software is installed

• Check ippers for excessive wear. Excessive ipper sloppi-

ness (vertical or horizontal) or weakness indicates a ipper

rebuild is required.

• Clean machine inside and out and check leg levelers for

free operation.

• Visual check for loose or broken playeld and cabinet parts

and repair as necessary.

• Electrical check: Plug into grounded outlet and check for

proper operation through DIAGNOSTICS (enter the Service

Menu).

• Clean playeld.

• Replace worn or dirty rubbers.

• Replace pinballs.

• Playeld switch adjustments: Check all playeld switches

with a pinball.

• Check all settings (refer to manual for factory settings).

• Check coin door: With door closed, insert coins to verify

proper operation.

• Check for proper adjustment of the plumb bob tilt.

• Play game: Check for satisfactory operation.

COMMON PINBALL TOOLS

• Common nut drivers (¼”, 5/16”, 11/32", ⅜”)

• Phillips screw driver

• Standard Allen wrench/Hex key set

• ⅝” Socket with ratchet

• Adjustable wrench (5/8" & 9/16")

• 6" Torpedo Level (or use a pinball

• Flashlight or headlamp

• Soldering Iron (60w with at tip), lead-free solder

• Wire cutter

• Wire stripper

• Long nose (“needle nose”) pliers

1.4 MAINTENANCE KITS

Description Part Number

Primus Standard Pinball Location Maintenance Kit

8 oz pinball playeld wax (Novus # 2) (675-0003-01)

Standard Pinball (260-5000-00)

Cleaning Cloth

All Playeld Rubber Rings

Spare Fuses

502-6002-N9

Primus Deluxe Pinball Location Maintenance Kit

All standard kit items, plus:

Flipper rebuild kits, Left and Right (500-6307-10,-00)

502-6003-N9

Primus Playeld Plastics Kit 803-5000-N9

Primus Cabinet Decals Kit 802-5000-N9

1.5 COMMON MAINTENANCE

PARTS

Description Part Number

8 oz Pinball Playeld wax (Novus # 2) 675-0003-01

Standard Pinball, 1-1/16 in 260-5000-00

Flipper Rebuild Kit Left (Standard) 500-6307-10

Flipper Base Plate Kit Left 515-6617-01

Flipper Rebuild Kit Right 500-6307-00

Flipper Base Plate Kit Right 515-6617-00

SPIKE SYSTEM AND NODE GUIDE

PRIMUS MANUAL 500-55N9-01 Copyright of Primus Inc. 2018

2.1 SPIKE SYSTEM OVERVIEW

The SPIKE Pinball system is a rugged, distributed, and em-

bedded platform custom-designed for the rigors of the pinball

machine environment. SPIKE takes advantage of modern tech-

nologies to deliver an immersive pinball experience that supports

modern features, reduces cabling, and increases serviceability

and reliability.

A Stern Pinball machine based on the SPIKE system will have at

least two nodes networked together with the SPIKE node bus,

a custom industrial pinball control bus that is designed around

industry standards and optimized for the pinball environment.

The primary CPU node is networked to one or more input/output

nodes over standard Category 5 UTP (unshielded twisted pair)

ethernet cabling.

There are ve primary types of nodes that are found in the game.

• CPU node (Node 0) - The primary node that controls other

nodes in the system. Contains the primary game software

for the system and provides SPIKE node bus power for other

nodes.

• Cabinet 48V node (Node 1) - Specialized node with specic

inputs and outputs for coin doors, tilt mechanisms, and other

bottom-cabinet devices.

• 48V playeld node - Controls high power devices such

as coils and ashers, and also supports a few switch and

low-power outputs. Powered by the system 48V power

supply.

• Light and switch node - High-density switch and low-power

LED outputs, bus-powered from the node bus. These boards

contain as many 32 switch inputs and light outputs.

• Node extensions - These sub-nodes add additional low-pow-

er input and outputs to a specic Power or I/O node and are

connected with simple serial bus.

2.2 NODE BUS CABLING

The SPIKE node bus utilizes standard Ethernet-style RJ45 8-pin

modular jacks, and off-the-shelf Category 5e or better ethernet

cabling. The node bus is electrically different from Ethernet and

does not not utilize Ethernet or TCP/IP protocols or signaling

standards. SPIKE nodes are not compatible with standard com-

puter networking equipment.

CAUTION: Plugging a SPIKE Node or CPU board into a standard

Ethernet port may damage one or both devices and void your

warranty.

2.3 SYSTEM POWER

The SPIKE System is powered from an 48V DC power supply

bus. Each SPIKE node converts this voltage to lower voltages

required by the node and its specic components. A SPIKE 48V

node typically controls high-power outputs such as game coil

mechanisms and high-brightness LEDs. These powered nodes

are supplied directly with 48V system power. SPIKE standard I/O

nodes are low-power nodes that read switch inputs and output

to standard-brightness LEDs. Standard I/O nodes use the node

bus power, which is supplied by the main CPU node over the

node bus modular jack connectors.

COIN-DOOR SAFETY INTERLOCK

To protect the system and for user safety, power to the playeld

is disabled when the front coin door is opened. 48V system pow-

er and 9V node bus power is disabled to all playeld components

until the switch is closed.

2.4 SPIKE NODE ADDRESSES

Each SPIKE node has a unique address ranging from 0 to 15. Not

all addresses are used in all games. Nodes can be of the same

part number, so the address is specied on the DIP switches on

each node. When replacing a node, be certain that the correct

address is set. Nodes can have 3-position and 4-position DIP

switches. Refer to the appropriate table to set the address for

each type of Node. The correct address for a node can be found

in the SPIKE node reference section of the manual or in the game

diagnostic software. Address 0 is reserved for the backbox CPU

node, where the game software resides. Address 1 is reserved for

the cabinet node, located inside the coin door. These two nodes

do not have DIP switches as their address is not congurable.

Address 1 2 3

8 OFF OFF OFF

9 OFF OFF ON

10 OFF ON OFF

11 OFF ON ON

12 ON OFF OFF

13 ON OFF ON

14 ON ON OFF

15 ON ON ON

Figure 2.4.1. SPIKE node addresses for nodes with 3-position DIP

switches. Addresses 0-7 are not used by SPIKE nodes with 3-posi-

tion DIP switches.

Address 1 2 3 4

8 OFF OFF OFF OFF

9 OFF OFF ON OFF

10 OFF ON OFF OFF

11 OFF ON ON OFF

12 ON OFF OFF OFF

13 ON OFF ON OFF

14 ON ON OFF OFF

15 ON ON ON OFF

Figure 2.4.2. SPIKE node addresses for nodes with 4-position DIP

switches. Addresses 0-7 are reserved for xed-function nodes and

do not require conguration.

2. SPIKE SYSTEM AND NODE GUIDE

SPIKE SYSTEM AND NODE GUIDE

2.5 SPIKE NODE PROGRAMMING

The SPIKE nodes are smart nodes that have on-board pro-

cessors and run embedded code. The nodes are programmed

automatically by the CPU node whenever software updates are

installed to the CPU. When replacing a node, the CPU node will

detect and update the node to the latest software with no user

intervention. Always replace nodes with the power to the game

turned OFF.

2.6 SPIKE SYSTEM TERMINOLOGY

MULTI GENERAL ILLUMINATION LIGHTING

General Illumination Lighting is two or more lights powered by

one control source. These are often a number of LEDs connect-

ed in parallel and the system controls these as one large LED. A

missing LED will not affect these circuits, however a shorted LED

can cause the entire string of LEDs to turn off.

SINGLE LIGHTS

Single lights and LEDs are direct-controlled from SPIKE node

boards. A common power source is grounded by individual

transistors to turn individual LEDs on and off. Groups of LEDs,

usually by node connector, share a common power source, so if

a group of LEDs is out, check the wiring for the power source.

FLASHERS

SPIKE games treat ashers the same as single LEDs that draw

more power. Flashers are controlled from the same circuits that

power regular lights.

DRIVERS

A driver is a circuit that controls a high power-device such as a

coil, magnet, or motor. Each device has a common 48V power

source that is then connected to ground by a dedicated control

transistor. Each driver is protected against shorting, static elec-

tricity, and over-current conditions. Take caution as 48V is always

present on a device even when it is not energized.

OPTOS

Certain types of optical switches (“optos”) require external signal

conditioning. For these optos, they will interface to a SPIKE node

via an opto signal conditioning board. Other optical switches

connect directly to the Spike node board.

System Protections

CAUTION: Unless explicitly directed by an Authorized Stern Re-

pair technician, perform ALL work on your pinball machine with

the power disabled!

INPUT/OUTPUT PROTECTIONS

SPIKE features built-in short-circuit, static electricity, and other

protections to maximize reliability. If an LED, coil or other device

shorts, it will be disabled but will not shut down the entire system

in most circumstances. Groups of LEDs, coils, and switches often

share common power supplies or other circuits, so it is possible

that a bad device will affect the group of related devices and

require removal or repair to x the group. The system diagnostics

will inform the technician of shorted or otherwise malfunctioning

devices whenever possible. While the system is protected against

permanent damage, it is strongly recommended to repair or

replace these bad components as soon as possible to minimize

downtime and maximize game earnings.

FUSES

Nodes that have 48 V power are fused individually. Fuse voltage

ratings are a safety rating and always must be higher than the

circuit the fuse is protecting. Never replace a fuse with a lower

voltage-rated fuse. Fuse current ratings must be replaced with

the same current value. A higher current value fuse could cause

catastrophic failures, and a lower-value fuse will cause premature

fuse failures.

Common fuses

Fuse Rating (Amps) Type Part Number

3 A Slow Blow MDL 200-5000-08

4 A Slow Blow MDL 200-5000-06

5 A Slow Blow MDL 200-5000-01

7 A Slow Blow MDL 200-5000-03

8 A Slow Blow MDL 200-5000-05

CAUTION: Always replace fuses with the exact current specica-

tions.

2.7 COMMON SPIKE NODE BOARDS

Description Type Part Number

SPIKE CPU Node Node 520-6936-01

SPIKE CPU Node w/ Video Out Support (Back-

ward compatible with -00) Node 520-6936-10

Cabinet Node Node 520-5319-10

48V 8-Driver Node Node 520-6935-10

48V 4-Driver Node Node 520-5329-10

48V Core Node Node 520-6985-72

SPIKE 32 Light and Switch Node Node 520-5322-30

Trough Serial Opto Receiver Extension Extension 520-5345-01

SPIKE SYSTEM AND NODE GUIDE CONTINUED

LIGHT, SWITCH, AND DRIVER REFERENCE

3. LIGHT, SWITCH, AND DRIVER REFERENCE

3.1 SPIKE NODE BOARDS

755-7576-N9 COPYRIGHT OF PRIMUS INC. 2018

Node Bus Cable (RJ45)

604-5004-08-XX

Serial Data Cable

ID DIP Address Description Location Part Number

Node 0 n/a SPIKE CPU Node Backbox 520-6936-01

Node 1 n/a Cabinet Node Cabinet 520-5319-10

Node 8 OFF-OFF-OFF-OFF Lower Playeld 48V 8-Driver Node Lower playeld 520-6935-10

Node 9 OFF-OFF-ON Mid Left Playeld 48V 4-Driver Node Mid left playeld 520-5329-10

Node 10 OFF-ON-OFF Mid Right Playeld 32 Lighting and Switch Mid left playeld 520-5322-72

Node 11 OFF-ON-ON Back Box 48V 4-Driver Node Backbox 520-5329-10

11a n/a 9 Lamp Bottom Extension Backbox 520-6963-00

11b n/a 10 Lamp Top Extension Backbox 520-6962-00

ID DIP Address Description Location Part Number

Node 0 n/a SPIKE CPU Node Backbox 520-6936-01

Node 1 n/a Cabinet Node Cabinet 520-5319-10

Node 8 OFF-OFF-OFF-OFF Lower Playeld 48V 8-Driver Node Lower playeld 520-6935-10

Node 9 OFF-OFF-ON Mid Left Playeld 48V 4-Driver Node Mid left playeld 520-5329-10

Node 10 OFF-ON-OFF Mid Right Playeld 32 Lighting and Switch Mid left playeld 520-5322-72

Node 11 OFF-ON-ON Back Box 48V 4-Driver Node Backbox 520-5329-10

11a n/a 9 Lamp Bottom Extension Backbox 520-6963-00

11b n/a 10 Lamp Top Extension Backbox 520-6962-00

n/a Stepper Controller Driver Board Backbox 520-6961-00

n/a Power Supply Backbox 011-5003-00

n/a Power Distribution Board Backbox 520-8096-00

n/a Stepper Motor Opto Backbox 520-6960-00

n/a Diagnostic Display Playeld 520-6964-00

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stern Pinball Flipper Handbücher

Stern Pinball

Stern Pinball WHOA NELLIE! BIG JUICY MELONS Bedienungsanleitung

Stern Pinball

Stern Pinball JAMES BOND 007 PRO Bedienungsanleitung

Stern Pinball

Stern Pinball JURASSIC PARK Bedienungsanleitung

Stern Pinball

Stern Pinball LED ZEPPELIN PRO Bedienungsanleitung

Stern Pinball

Stern Pinball GODZILLA Bedienungsanleitung

Stern Pinball

Stern Pinball MANDALORIAN Bedienungsanleitung

Stern Pinball

Stern Pinball The Beatles Leitfaden

Stern Pinball

Stern Pinball The Monsters Bedienungsanleitung

Stern Pinball

Stern Pinball THE MANDALORIAN PRO Handbuch

Stern Pinball

Stern Pinball FOO FIGHTERS Bedienungsanleitung

Stern Pinball

Stern Pinball JAWS Bedienungsanleitung

Stern Pinball

Stern Pinball GAME OF THRONES Bedienungsanleitung

Stern Pinball

Stern Pinball JAMES BOND 007 LE Bedienungsanleitung

Stern Pinball

Stern Pinball 500-55L5-01 Bedienungsanleitung

Stern Pinball

Stern Pinball VENOM PRO Bedienungsanleitung

Stern Pinball

Stern Pinball RUSH LE Bedienungsanleitung

Stern Pinball

Stern Pinball AC/DC Bedienungsanleitung

Stern Pinball

Stern Pinball WRESTLEMANIA WWE PRO Bedienungsanleitung

Stern Pinball

Stern Pinball GODZILLA PRO Bedienungsanleitung

Stern Pinball

Stern Pinball NETFLIX STRANGER THINGS Series Bedienungsanleitung

Stern Pinball

Stern Pinball BLACK KNIGHT SWORD OF RAGE 500-55N1-01 Bedienungsanleitung

Stern Pinball

Stern Pinball Batman Premium Bedienungsanleitung

Stern Pinball

Stern Pinball JURASSIC PARK PRO Bedienungsanleitung

Stern Pinball

Stern Pinball WWE PRO 500-55G1-00 Bedienungsanleitung

Beliebte Flipper Handbücher anderer Marken

Jersey Jack Pinball

Jersey Jack Pinball Pirates of the Caribbean Bedienungsanleitung

Williams

Williams Pinball 2000 Star Wars Episode I Bedienungsanleitung

HOMEPIN

HOMEPIN Thunderbirds Handbuch

DP THE BIG LEBOWSKI Bedienungsanleitung

Pinnovators

Pinnovators 330.128.000 Bedienungsanleitung

Dr Pinball

Dr Pinball Personal DMD Einrichtungshandbuch

Capcom

Capcom Breakshot Bedienungsanleitung

Bally

Bally Miss America Deluxe Handbuch

Williams Electronics

Williams Electronics JUBILEE Bedienungsanleitung

Spooky Pinball

Spooky Pinball Rick and Morty Bedienungsanleitung

Data East

Data East Batman Bedienungsanleitung

HOMEPIN

HOMEPIN Thunderbirds Handbuch

Jersey Jack Pinball

Jersey Jack Pinball The Hobbit Bedienungsanleitung

Stern

Stern GAME OF THRONES LE Bedienungsanleitung

Flippp

Flippp PI-1 Handbuch

Gottlieb

Gottlieb Barb Wire Bedienungsanleitung

American Pinball

American Pinball Hot Wheels Installationsanleitung

Bally

Bally Xenon Bedienungsanleitung